Skip to content
Robotics

OpenWAM coffee making (Galaxea R1 Lite)

нейросеть для приготовления капсульного кофе роботом

2 min readupdated

Файнтюн модели робототехники OpenWAM-α от автора zekaili, обученный управлять двуруким роботом Galaxea R1 Lite (с манипуляторами A1X) для приготовления кофе в капсульной кофемашине. На вход модель получает потоковое видео с трёх камер и текущее состояние манипуляторов, а на выходе генерирует последовательность целевых координат и положений для обеих рук робота. В основе лежит базовый чекпоинт OpenWAM-Alpha-Pretrain-Foundation-Model с видео-бэкбоном Wan2.2-TI2V-5B (модель генерации видео на 5 млрд параметров, адаптированная под предсказание действий). В отличие от общей базовой версии, этот чекпоинт дообучен на конкретном многоэтапном сценарии взаимодействия с бытовым прибором и пригодится исследователям робототехники и разработчикам VLA-систем (Vision-Language-Action — моделей, связывающих зрение, текст и действия).

Ключевые особенности

  • Работает с тремя ракурсами одновременно: камерой на голове робота (head_left_rgb) и двумя камерами на запястьях (left_wrist_rgb, right_wrist_rgb), объединёнными в L-образный кадр 384×320.
  • Использует представление end-effector (EEF — положение и ориентация захвата в пространстве): 20-мерный вектор координат, поворотов (rot6d) и состояния схватов для левой и правой руки.
  • Прогнозирует действия чанками (пакетами) на 32 шага вперёд на основе 33-кадрового временного окна при частоте записи 15 fps.
  • Построена на базе Wan2.2-TI2V-5B с архитектурой dual-system joint self-attention и взаимным маскированием (mutual mask).

Что можно сделать

  • Развернуть policy-сервер для управления реальным роботом Galaxea R1 Lite или его цифровым двойником в симуляторе с пересчётом EEF-координат в углы суставов через обратную кинематику (IK).
  • Использовать чекпоинт как базовую политику (policy) для бенчмаркинга многошаговых бимануальных задач в среде OpenWAM и LeRobot v2.1.
  • Дообучить модель на собственных датасетах манипуляций с бытовыми предметами, используя приложенную статистику нормализации normalization_stats.npy.

Пример

bash scripts/deploy.sh <путь_к_директории_модели>
# Текстовая инструкция, которую необходимо передавать клиенту при инференсе:
# Make a cup of coffee with the capsule coffee machine: insert a coffee capsule with the right arm, place the paper cup under the spout with the left arm, press the brew button, and take the cup of coffee away.
ПодробнееОбучение: 10 000 шагов на 399 эпизодах (258 562 кадра) из датасета zhuoyang20/foreact_coffee_making_data.
Железо при обучении: 2 ноды по 8 GPU NVIDIA H100 (глобальный батч 64, формат bf16, ZeRO-2, ~2.5 эпохи).
Гиперпараметры: оптимизатор AdamW, lr 1e-4, косинусное расписание с 5% warmup, weight decay 0.01.
Ограничения: ридер данных r1lite.py пока не включён в основной репозиторий OpenWAM, а пути в config.yaml указаны как заглушки.
Discuss Telegram 0 13

Will it run?

Runs in FP8 / INT8

Full precision does not fit, a quantised version does: quality barely changes down to 8 bits, more noticeably at 4 bits.

  • BF16weights 23 GB · ready files26 GB
  • FP8 / INT8recommendedweights 12 GB13 GB
  • 4-bitweights 6.5 GB7.6 GB

Tip: go 8-bit.FP8 / INT8 is within about a percent of full precision in quality, takes half the memory and runs faster on RTX 40/50 and H100. Full precision only pays off for fine-tuning.

What to get for this model

Massed ComputeOpen Massed Compute

Your own GPU: FP8 / INT8 — from RTX 5080 · BF16 — from RTX 5090

Massed Compute hourly prices, November 2026. The discounted price applies with the coupon at checkout.

Estimate: weights plus working memory. Long videos, high resolutions and long contexts need more.

Run it on Massed Compute

The script downloads the model to the rented machine. How to run it is in the model card.

  1. 1. Rent a machine with a fitting GPU

    Open Massed Compute
  2. 2. Paste the script into the machine's terminal

    Connect over SSH (the Massed Compute panel shows the command) or open a terminal on the machine's desktop.

    HF_TOKEN / CIVITAI_TOKENThe script starts with token lines: paste yours between the quotes. The Hugging Face token is for gated models, the Civitai one for Civitai models.

    # zekaili/OpenWAM_coffee_making_gb64_lr1e-4_10k
    mkdir -p ~/models
    curl -LsSf https://astral.sh/uv/install.sh | sh
    source "$HOME/.local/bin/env"
    uv tool install "huggingface_hub[cli]"
    hf download zekaili/OpenWAM_coffee_making_gb64_lr1e-4_10k --local-dir ~/models/OpenWAM_coffee_making_gb64_lr1e-4_10k
    # The model is in ~/models. How to run it is in the model card (link above).
  3. 3. Use it

    The model is in ~/models. How to run it is in the model card (link above).

Stop the machine in the panel when you are done: it bills by the minute while it runs.

How to speed it up

Picked for this model type. Choose your hardware above to see what fits you exactly.

  • FlashAttention 44.0.0b40from November 18, 2026new release

    fastest exact attention on B200

    Kernels for Blackwell (beta). Exact attention without quantisation — fine for everything, LLMs included.

    How to enable: pip install flash-attn-4; vLLM and SGLang pick it up themselves.

    Earlier generations (2)
    • FlashAttention 3 — The Hopper (H100/H200) version with FP8.
    • FlashAttention 2 — The standard for RTX 30/40/50 and A100: exact attention without the memory cost of long contexts.
  • torch.compile2.15.0from October 28, 2026new release

    10–30% for free

    Compiles the model for your GPU. Slower first run, faster afterwards.

    How to enable: model = torch.compile(model); in ComfyUI the TorchCompileModel node.

Model family

New posts about versions of OpenWAM-Alpha-Pretrain-Foundation-Model (quants, finetunes, LoRAs) will show up under the bell.

Fine-tunes 3All on Hugging Face

About the model

zekaili/OpenWAM_coffee_making_gb64_lr1e-4_10k
Author
zekaili
Category
Robotics
Released
Posted

On NeyroLearn

Hugging Face

130

Ask AI about this model

Answered by Gemini 4 · the chat is kept only in this tab

Comments