Skip to content
Robotics

pi05_fairino_bimanual_cube_transfer_teleop_model

двурукая манипуляция кубиком для роботов Fairino

2 min readupdated

Политика управления (набор правил поведения для робота) на 4.14B параметров, обученная для роботов платформы Fairino в фреймворке LeRobot. Модель построена на базе lerobot/pi05_base — Vision-Language-Action (VLA, архитектура, объединяющая зрение, понимание текстовых команд и генерацию действий) модели π₀.₅ от Physical Intelligence, созданной для работы в незнакомых условиях. На практике она принимает данные с трёх камер и текущее состояние манипуляторов, а на выходе выдаёт вектор действий по 14 степеням свободы для перекладывания кубика двумя руками. Пригодится исследователям робототехники и разработчикам, использующим LeRobot и двурукие установки Fairino.

Ключевые особенности

  • Работает с тремя видеопотоками (top, left, right в разрешении 640×480) и 14-мерным вектором состояния робота.
  • Обучена на датасете из 50 эпизодов телеуправления (35 944 кадра с частотой 30 FPS) для выполнения последовательной задачи.
  • Основана на архитектуре π₀.₅, адаптированной в репозитории LeRobot версии 0.6.1, и распространяется под открытой лицензией Apache-2.0.

Что можно сделать

  • Запустить на двуруком роботе Fairino для автоматического захвата кубика правой рукой, перемещения его в центр и укладки в коробку левой рукой.
  • Использовать как отправную точку или референс при дообучении политик π₀.₅ под собственные сценарии бимануального телеуправления в LeRobot.

Пример

lerobot-rollout \
  --strategy.type=base \
  --robot.type=Fairino \
  --robot.port= \
  --policy.path=Bekhzod/pi05_fairino_bimanual_cube_transfer_teleop_model \
  --task="pick up the cube with the right arm, place it in the middle, then put it in the box with the left arm."
ПодробнееОбучение: 20 000 шагов, batch size 32, оптимизатор AdamW, learning rate 2.5e-05, seed 1000.
Входы и выходы: состояние и действия размером (14,), три RGB-камеры (3, 480, 640).
Ограничения: результаты оценки (evaluation) на реальном роботе в карточке пока не представлены.
Discuss Telegram 0 26

Will it run?

Runs in BF16

Fits without quantisation.

  • BF16weights 8.7 GB · ready files10 GB
  • FP8 / INT8recommendedweights 3.9 GB4.7 GB
  • 4-bitweights 2.2 GB2.9 GB

Tip: go 8-bit.FP8 / INT8 is within about a percent of full precision in quality, takes half the memory and runs faster on RTX 40/50 and H100. Full precision only pays off for fine-tuning.

What to get for this model

Massed ComputeOpen Massed Compute

Your own GPU: FP8 / INT8 — from RTX 2060 · BF16 — from RTX 2080 Ti

Massed Compute hourly prices, November 2026. The discounted price applies with the coupon at checkout.

Estimate: weights plus working memory. Long videos, high resolutions and long contexts need more.

Run it on Massed Compute

The script downloads the model to the rented machine. How to run it is in the model card.

  1. 1. Rent a machine with a fitting GPU

    Open Massed Compute
  2. 2. Paste the script into the machine's terminal

    Connect over SSH (the Massed Compute panel shows the command) or open a terminal on the machine's desktop.

    HF_TOKEN / CIVITAI_TOKENThe script starts with token lines: paste yours between the quotes. The Hugging Face token is for gated models, the Civitai one for Civitai models.

    # Bekhzod/pi05_fairino_bimanual_cube_transfer_teleop_model
    mkdir -p ~/models
    curl -LsSf https://astral.sh/uv/install.sh | sh
    source "$HOME/.local/bin/env"
    uv tool install "huggingface_hub[cli]"
    hf download Bekhzod/pi05_fairino_bimanual_cube_transfer_teleop_model --local-dir ~/models/pi05_fairino_bimanual_cube_transfer_teleop_model
    # The model is in ~/models. How to run it is in the model card (link above).
  3. 3. Use it

    The model is in ~/models. How to run it is in the model card (link above).

Stop the machine in the panel when you are done: it bills by the minute while it runs.

How to speed it up

Picked for this model type. Choose your hardware above to see what fits you exactly.

  • FlashAttention 44.0.0b40from November 18, 2026new release

    fastest exact attention on B200

    Kernels for Blackwell (beta). Exact attention without quantisation — fine for everything, LLMs included.

    How to enable: pip install flash-attn-4; vLLM and SGLang pick it up themselves.

    Earlier generations (2)
    • FlashAttention 3 — The Hopper (H100/H200) version with FP8.
    • FlashAttention 2 — The standard for RTX 30/40/50 and A100: exact attention without the memory cost of long contexts.
  • torch.compile2.15.0from October 28, 2026new release

    10–30% for free

    Compiles the model for your GPU. Slower first run, faster afterwards.

    How to enable: model = torch.compile(model); in ComfyUI the TorchCompileModel node.

Model family

  1. paligemma-3b-pt-224family root
  2. pi05_base
  3. pi05_fairino_bimanual_cube_transfer_teleop_model

New posts about versions of paligemma-3b-pt-224 (quants, finetunes, LoRAs) will show up under the bell.

Fine-tunes 12All on Hugging Face
LoRAs and adapters 12All on Hugging Face

About the model

Bekhzod/pi05_fairino_bimanual_cube_transfer_teleop_model
Author
Bekhzod
Category
Robotics
Released
Posted

On NeyroLearn

Hugging Face

260

Ask AI about this model

Answered by Gemini 4 · the chat is kept only in this tab

Comments

Other

Tracera

Tracera