Skip to content
Robotics

pi05_cube2cross_v2_all_bf16_s1-ema

управление роборукой для сортировки кубиков

2 min readupdated

Это дообученная политика управления роботом (набор правил, по которым машина превращает данные с датчиков в движения), созданная пользователем felsager с помощью фреймворка LeRobot. На вход она принимает видеопоток с двух камер и текущее состояние манипулятора, а на выходе выдаёт команды действий для захвата и переноса разноцветных кубиков на красный крест по текстовой инструкции. Модель на 4.14B параметров основана на Vision-Language-Action архитектуре lerobot/pi05_base (адаптация π₀.₅ от Physical Intelligence, рассчитанной на работу в незнакомой среде). В отличие от базовой версии, этот вариант заточен под конкретную аппаратную связку ur5e_hand_e и точные манипуляции с объектами. Пригодится разработчикам и исследователям робототехники, работающим с платформой LeRobot.

Ключевые особенности

  • Платформа: настроена под робота ur5e_hand_e с камерами top (общий вид) и wrist (на запястье).
  • Мультимодальный вход: обрабатывает два изображения размером 640×480 и вектор состояния observation.state из 10 параметров, формируя 10-мерный вектор action.
  • Обучение на демонстрациях: дообучена на датасете felsager/vla_cubes_cross_v2, содержащем 1000 эпизодов (493 474 кадра при 30 FPS).
  • Языковые команды: понимает текстовые задания для синего, зелёного, жёлтого и красного кубиков.

Что можно сделать

  • Запустить готовый сценарий захвата и перекладки цветных кубиков на реальном роботе ur5e_hand_e через утилиту lerobot-rollout.
  • Использовать чекпоинт как отправную точку для экспериментов с визуально-языковым управлением (VLA) и тестированием обобщения в новых условиях освещения или окружения.

Пример

lerobot-rollout \
  --strategy.type=base \
  --robot.type=ur5e_hand_e \
  --robot.port= \
  --robot.cameras="{ top: {type: opencv, index_or_path: , width: 640, height: 480, fps: 30}, wrist: {type: opencv, index_or_path: , width: 640, height: 480, fps: 30}}" \
  --policy.path=felsager/pi05_cube2cross_v2_all_bf16_s1-ema \
  --task="pick up the blue cube and place it on the red cross." \
  --duration=60
ПодробнееОбучение: 30 000 шагов, batch size 16, оптимизатор AdamW, learning rate 5e-05, seed 1, версия LeRobot 0.6.2.
Ограничения: результаты замеров точности на реальном роботе в карточке пока не опубликованы.
Лицензия: gemma.
Discuss Telegram 0 23

Will it run?

Runs in BF16

Fits without quantisation.

  • BF16weights 8.7 GB · ready files10 GB
  • FP8 / INT8recommendedweights 3.9 GB4.7 GB
  • 4-bitweights 2.2 GB2.9 GB

Tip: go 8-bit.FP8 / INT8 is within about a percent of full precision in quality, takes half the memory and runs faster on RTX 40/50 and H100. Full precision only pays off for fine-tuning.

What to get for this model

Massed ComputeOpen Massed Compute

Your own GPU: FP8 / INT8 — from RTX 2060 · BF16 — from RTX 2080 Ti

Massed Compute hourly prices, November 2026. The discounted price applies with the coupon at checkout.

Estimate: weights plus working memory. Long videos, high resolutions and long contexts need more.

Run it on Massed Compute

The script downloads the model to the rented machine. How to run it is in the model card.

  1. 1. Rent a machine with a fitting GPU

    Open Massed Compute
  2. 2. Paste the script into the machine's terminal

    Connect over SSH (the Massed Compute panel shows the command) or open a terminal on the machine's desktop.

    HF_TOKEN / CIVITAI_TOKENThe script starts with token lines: paste yours between the quotes. The Hugging Face token is for gated models, the Civitai one for Civitai models.

    # felsager/pi05_cube2cross_v2_all_bf16_s1-ema
    mkdir -p ~/models
    curl -LsSf https://astral.sh/uv/install.sh | sh
    source "$HOME/.local/bin/env"
    uv tool install "huggingface_hub[cli]"
    hf download felsager/pi05_cube2cross_v2_all_bf16_s1-ema --local-dir ~/models/pi05_cube2cross_v2_all_bf16_s1-ema
    # The model is in ~/models. How to run it is in the model card (link above).
  3. 3. Use it

    The model is in ~/models. How to run it is in the model card (link above).

Stop the machine in the panel when you are done: it bills by the minute while it runs.

How to speed it up

Picked for this model type. Choose your hardware above to see what fits you exactly.

  • FlashAttention 44.0.0b40from November 18, 2026new release

    fastest exact attention on B200

    Kernels for Blackwell (beta). Exact attention without quantisation — fine for everything, LLMs included.

    How to enable: pip install flash-attn-4; vLLM and SGLang pick it up themselves.

    Earlier generations (2)
    • FlashAttention 3 — The Hopper (H100/H200) version with FP8.
    • FlashAttention 2 — The standard for RTX 30/40/50 and A100: exact attention without the memory cost of long contexts.
  • torch.compile2.15.0from October 28, 2026new release

    10–30% for free

    Compiles the model for your GPU. Slower first run, faster afterwards.

    How to enable: model = torch.compile(model); in ComfyUI the TorchCompileModel node.

Model family

  1. paligemma-3b-pt-224family root
  2. pi05_base
  3. pi05_cube2cross_v2_all_bf16_s1-ema

New posts about versions of paligemma-3b-pt-224 (quants, finetunes, LoRAs) will show up under the bell.

Fine-tunes 12All on Hugging Face
LoRAs and adapters 12All on Hugging Face

About the model

felsager/pi05_cube2cross_v2_all_bf16_s1-ema
Author
felsager
Category
Robotics
Released
Posted

On NeyroLearn

Hugging Face

230

Ask AI about this model

Answered by Gemini 4 · the chat is kept only in this tab

Comments