Skip to content
Images

MiniMax-H3-Image-pDMD-2steps

генерация и редактирование фото за 2 шага

2 min readupdated

Это дистилляционная LoRA (небольшая надстройка над базовой моделью) от разработчицы linoyts для модели MiniMax-H3-Image. Она сжимает стандартную генерацию с 6 шагов до 2 проходов, при этом качество создания картинок по тексту и редактирования по референсам остаётся близким к оригиналу. Адаптер обучен методом pDMD (Distribution Matching Distillation — перенос знаний от 6-шаговой модели-учителя к быстрой версии) в разрешении около 1 мегапикселя. Благодаря трёхкратному ускорению модель подходит для интерактивных и близких к реальному времени пайплайнов.

Ключевые особенности

  • 2 шага вместо 6: используется расписание sample_sigmas=[1.0, 12/13, 0.0], при котором задействуются первые две выходные головы трансформера.
  • Поддержка редактирования: помимо генерации с нуля (text-to-image), сохраняет способность править референсные изображения по тегам , в промпте.
  • Работа без CFG: как и базовая модель с дистилляцией гайданса, работает без параметров guidance_scale и negative_prompt.
  • Несколько соотношений сторон: обучена на форматах 1024×1024, 768×1344 и 1344×768 на расширенных промптах от MiniMax-H3-Image-PE.

Что можно сделать

  • Ускорить генерацию в 1 Мп: встраивать LoRA в веса базового MiniMax-H3-Image в библиотеке diffusers для быстрой генерации иллюстраций с подробными описаниями.
  • Редактировать фото по референсам: менять детали на загруженных снимках (например, убирать лишние предметы или менять позы персонажей) всего за два прохода нейросет.
  • Связать с расширителем промптов: объединить в одном пайплайне с MiniMax-H3-Image-PE, чтобы короткие запросы автоматически превращались в детальные описания перед быстрой генерацией.

Пример

lora_path = hf_hub_download("linoyts/MiniMax-H3-Image-pDMD-2steps", "pytorch_lora_weights.safetensors")
fuse_lora(pipe.transformer, lora_path)
pipe.register_to_config(sample_sigmas=[1.0, 12 / 13, 0.0])

image = pipe(
    prompt="Keep everything in  as it is, but remove the headphones and have the two hosts fist bump.",
    image=reference, height=1024, width=1024, min_generation_area=1024, output="images"
)[0]
ПодробнееОбучение: 1000 шагов на одной видеокарте H100 (rank 128, alpha 128 для слоёв attention и feed-forward).
Железо: трансформер и текстовый энкодер весят около 62 ГБ каждый в bfloat16, требуется ~140 ГБ CPU RAM при включённом авто-оффлоадинге.
Ограничения: при запуске обязательно передавать min_generation_area=1024, иначе пайплайн по умолчанию генерирует холст от 4 Мп, на который LoRA не рассчитана; требует diffusers>=0.43.0 и Python 3.11+.
Discuss Telegram 1 76

Will it run?

Won't run

Not enough memory even for 4-bit. Below are GPUs you can rent.

  • BF16weights 189 GB · ready files209 GB
  • FP8 / INT8recommendedweights 95 GB106 GB
  • 4-bitweights 54 GB61 GB

Tip: go 8-bit.FP8 / INT8 is within about a percent of full precision in quality, takes half the memory and runs faster on RTX 40/50 and H100. Full precision only pays off for fine-tuning.

What to get for this model

Massed ComputeOpen Massed Compute

Your own GPU: Won't fit any home GPU — renting is cheaper.

Massed Compute hourly prices, November 2026. The discounted price applies with the coupon at checkout.

This is a LoRA: counted together with its base model MiniMax-H3-Image.

Estimate: weights plus working memory. Long videos, high resolutions and long contexts need more.

Run it on Massed Compute

The script downloads the model to the rented machine. How to run it is in the model card.

  1. 1. Rent a machine with a fitting GPU

    Open Massed Compute
  2. 2. Paste the script into the machine's terminal

    Connect over SSH (the Massed Compute panel shows the command) or open a terminal on the machine's desktop.

    HF_TOKEN / CIVITAI_TOKENThe script starts with token lines: paste yours between the quotes. The Hugging Face token is for gated models, the Civitai one for Civitai models.

    # linoyts/MiniMax-H3-Image-pDMD-2steps
    mkdir -p ~/models
    curl -LsSf https://astral.sh/uv/install.sh | sh
    source "$HOME/.local/bin/env"
    uv tool install "huggingface_hub[cli]"
    hf download MiniMaxAI/MiniMax-H3-Image --local-dir ~/models/MiniMax-H3-Image
    hf download linoyts/MiniMax-H3-Image-pDMD-2steps --local-dir ~/models/MiniMax-H3-Image-pDMD-2steps
    # The model is in ~/models. How to run it is in the model card (link above).
    Add more LoRAs to MiniMax-H3-Image
  3. 3. Use it

    The model is in ~/models. How to run it is in the model card (link above).

Stop the machine in the panel when you are done: it bills by the minute while it runs.

How to speed it up

Picked for this model type. Choose your hardware above to see what fits you exactly.

  • SageAttention 3v2.2.0from October 28, 2025

    even faster on RTX 50 / Blackwell

    FP4 attention for Blackwell. Faster than SageAttention 2, but the authors suggest v2 when accuracy matters.

    How to enable: Build from the sageattention3_blackwell folder of the repo; in ComfyUI via KJNodes.

    Earlier generations (2)
    • SageAttention 2++ — Quantised (INT8/FP8) attention with no visible quality loss. The main speed-up for image and video generation.
    • SageAttention 1 — First version: INT8 for Q·K. Still works, but 2++ is faster and more accurate.
  • FlashAttention 44.0.0b40from November 18, 2026new release

    fastest exact attention on B200

    Kernels for Blackwell (beta). Exact attention without quantisation — fine for everything, LLMs included.

    How to enable: pip install flash-attn-4; vLLM and SGLang pick it up themselves.

    Earlier generations (3)
    • FlashAttention 3 — The Hopper (H100/H200) version with FP8.
    • FlashAttention 2 — The standard for RTX 30/40/50 and A100: exact attention without the memory cost of long contexts.
    • xFormers — The older way to speed up attention, works almost everywhere. Sage or Flash are faster where available.
  • cache-dit (DBCache)v1.5.6from November 20, 2026new release

    1.5–3× at nearly the same quality

    Reuses block outputs between diffusion steps. Supports most DiT models.

    How to enable: pip install cache-dit; one line cache_dit.enable_cache(pipe) for diffusers.

    Earlier generations (2)
    • MagCache — Skips steps by magnitude of change. More accurate than TeaCache, no calibration.
    • TeaCache — The first popular diffusion step cache. Works, newer methods are more accurate.
  • Nunchaku (SVDQuant 4-bit)v1.2.1from January 25, 2026

    ≈3× faster and 3.5× less memory

    4-bit versions of popular image models with almost no quality loss (FP4 on RTX 50).

    How to enable: Ready weights for supported models; in ComfyUI use ComfyUI-nunchaku.

  • torch.compile2.15.0from October 28, 2026new release

    10–30% for free

    Compiles the model for your GPU. Slower first run, faster afterwards.

    How to enable: model = torch.compile(model); in ComfyUI the TorchCompileModel node.

MiniMax H3 prompts

All prompts

Ready prompts with the resulting video: copy and try.

Model family

Requires the base model

MiniMaxAI/MiniMax-H3-Image

This model is a LoRA / adapter. Download the base model first, then load this one on top.

  1. MiniMax-H3family root
  2. MiniMax-H3-Image
  3. MiniMax-H3-Image-pDMD-2steps

New posts about versions of MiniMax-H3 (quants, finetunes, LoRAs) will show up under the bell.

Quantised versions 12All on Hugging Face
Fine-tunes 12All on Hugging Face
LoRAs and adapters 12All on Hugging Face
Merges 3All on Hugging Face

About the model

linoyts/MiniMax-H3-Image-pDMD-2steps
Author
linoyts
Category
Images
Released
Posted

On NeyroLearn

Hugging Face

761

Ask AI about this model

Answered by Gemini 4 · the chat is kept only in this tab

Comments