Skip to content
Robotics

dit_block_2

DiT-политика для перекладывания стакана

2 min readupdated

dit_block_2 — компактная модель управления роборукой (SO-10x), обученная методом имитационного обучения для одной конкретной задачи: взять стакан и поставить его в кольцо. В основе лежит архитектура Diffusion-Transformer (DiT) с алгоритмом flow matching, которая предсказывает сразу последовательность движений (chunk) на 48 кадров вперёд по картинке с одной фронтальной камеры и текущим углам моторов. Автором выступает anschrur; эта версия отличается от прошлой dit-cup переснятым чистым датасетом из 30 эпизодов, где исправили ошибку смещения угла поворота кисти (wrist_roll) на ~170°. Модель пригодится разработчикам и исследователям, работающим с недорогими манипуляторами на базе сервоприводов Feetech и фреймворком lerobot.

Ключевые особенности

  • Архитектура DiT на 16,66 млн параметров (4 слоя, скрытая размерность 256) с энкодером изображений resnet18.
  • Принимает кадры 480×640 с камеры observation.images.front (сжимаются до 128×128 с кропом 0.9) и 6-мерный вектор состояния суставов.
  • Выдаёт последовательность из 48 действий за раз — при рабочей частоте 30 fps это соответствует 1,6 секунды плавного движения.
  • Поставляется единым файлом policy.ckpt (66,7 МБ), куда уже вшиты нормализаторы состояний и действий — без них веса не работают.

Что можно сделать

  • Запустить замкнутый цикл управления (closed-loop) на реальной роборуке SO-10x с частотой 30 fps для захвата и установки стакана.
  • Проверить поведение манипулятора в безопасном режиме без движения (--dry-run) через скрипт-обвязку dit_on_robot.py и класс DiTAgent.
  • Использовать чекпоинт как готовый бейзлайн для сравнения качества работы на исправленном датасете по сравнению с предыдущей версией dit-cup.

Пример

from robot_imitation_glue.baseline.dit_agent import DiTAgent

agent = DiTAgent(
    checkpoint_path="policy.ckpt",
    camera_key_mapping={"front": "observation.images.front"},
    state_key="observation.state",
    device="cpu",
    n_sampling_steps=10,
)
ПодробнееОбучение: 200 эпох (41 200 шагов) на 13 218 кадрах (30 эпизодов, 30 fps), финальный train loss — 0.018505.
Железо обучения: 1× RTX 5090 за 1,7 часа; инференс возможен даже на CPU за 10 шагов сэмплера Эйлера.
Ограничения: нет метрик успеха (success rate) на реальном роботе; не поддерживается стандартным from_pretrained из lerobot.
Discuss Telegram 0

Will it run?

Runs in BF16

Fits without quantisation.

  • BF16weights 0.1 GB · ready files0.6 GB
  • FP8 / INT8recommendedweights 0.0 GB0.5 GB
  • 4-bitweights 0.0 GB0.5 GB

Tip: go 8-bit.FP8 / INT8 is within about a percent of full precision in quality, takes half the memory and runs faster on RTX 40/50 and H100. Full precision only pays off for fine-tuning.

What to get for this model

Massed ComputeOpen Massed Compute

Your own GPU: FP8 / INT8 — from RTX 2060 · BF16 — from RTX 2060

Massed Compute hourly prices, November 2026. The discounted price applies with the coupon at checkout.

Estimate: weights plus working memory. Long videos, high resolutions and long contexts need more.

Run it on Massed Compute

The script downloads the model to the rented machine. How to run it is in the model card.

  1. 1. Rent a machine with a fitting GPU

    Open Massed Compute
  2. 2. Paste the script into the machine's terminal

    Connect over SSH (the Massed Compute panel shows the command) or open a terminal on the machine's desktop.

    HF_TOKEN / CIVITAI_TOKENThe script starts with token lines: paste yours between the quotes. The Hugging Face token is for gated models, the Civitai one for Civitai models.

    # anschrur/dit_block_2
    mkdir -p ~/models
    curl -LsSf https://astral.sh/uv/install.sh | sh
    source "$HOME/.local/bin/env"
    uv tool install "huggingface_hub[cli]"
    hf download anschrur/dit_block_2 --local-dir ~/models/dit_block_2
    # The model is in ~/models. How to run it is in the model card (link above).
    Add more LoRAs to dit_block_2
  3. 3. Use it

    The model is in ~/models. How to run it is in the model card (link above).

Stop the machine in the panel when you are done: it bills by the minute while it runs.

How to speed it up

Picked for this model type. Choose your hardware above to see what fits you exactly.

  • FlashAttention 44.0.0b40from November 18, 2026new release

    fastest exact attention on B200

    Kernels for Blackwell (beta). Exact attention without quantisation — fine for everything, LLMs included.

    How to enable: pip install flash-attn-4; vLLM and SGLang pick it up themselves.

    Earlier generations (2)
    • FlashAttention 3 — The Hopper (H100/H200) version with FP8.
    • FlashAttention 2 — The standard for RTX 30/40/50 and A100: exact attention without the memory cost of long contexts.
  • torch.compile2.15.0from October 28, 2026new release

    10–30% for free

    Compiles the model for your GPU. Slower first run, faster afterwards.

    How to enable: model = torch.compile(model); in ComfyUI the TorchCompileModel node.

Model family

New posts about versions of dit_block_2 (quants, finetunes, LoRAs) will show up under the bell.

No known relatives of this model yet. All derivatives on Hugging Face

About the model

anschrur/dit_block_2
Author
anschrur
Category
Robotics
Released
Posted

On NeyroLearn

Hugging Face

00

Ask AI about this model

Answered by Gemini 4 · the chat is kept only in this tab

Comments