Skip to content
Robotics

act_pickandplace_cube

политика управления роботом для перекладывания кубика

2 min readupdated

Модель представляет собой политику имитационного обучения для робототехники, которая управляет манипулятором при захвате и перемещении красного кубика (задача «Red block pickup and place»). В основе лежит архитектура Action Chunking with Transformers (ACT — метод, который предсказывает сразу короткие последовательности действий вместо одиночных шагов, обучаясь на данных телеуправления). Политика обучена пользователем Rlayd36 с помощью библиотеки LeRobot и рассчитана на робота типа so_follower с двумя камерами. Подойдёт разработчикам и энтузиастам робототехники, работающим с платформой LeRobot и манипуляторами SO-100/SO-101 (so_follower) для тестирования или дообучения задач захвата объектов.

Ключевые особенности

  • Архитектура ACT: модель объёмом 0.05B параметров предсказывает последовательности из 6-мерных векторов действий (action).
  • Мультимодальный ввод: принимает текущее состояние робота (6 параметров observation.state) и видеопоток 640×480 с двух камер — верхней (overhead) и на запястье (wrist).
  • Обучена на реальных демонстрациях: тренировка прошла на открытом датасете Rlayd36/pick-cube_20261113_161307, состоящем из 60 эпизодов (32 476 кадров при 30 FPS).
  • Открытая лицензия: распространяется под лицензией Apache 2.0 для свободного использования и модификации.

Что можно сделать

  • Запустить на совместимом железе: развернуть готовую политику на физическом манипуляторе so_follower с двумя подключёнными камерами для автоматического перекладывания красного блока.
  • Использовать как отправную точку: взять конфигурацию обучения и открытый датасет автора в качестве базового пайплайна для тренировки собственных навыков в LeRobot.

Пример

lerobot-rollout \
  --strategy.type=base \
  --robot.type=so_follower \
  --robot.port= \
  --robot.cameras="{ overhead: {type: opencv, index_or_path: 0, width: 640, height: 480, fps: 30}, wrist: {type: opencv, index_or_path: 1, width: 640, height: 480, fps: 30}}" \
  --policy.path=Rlayd36/act_pickandplace_cube \
  --task="Red block pickup and place" \
  --duration=60
Подробнее Параметры обучения: 100 000 шагов, batch size 8, оптимизатор AdamW (learning rate 1e-05), seed 1000, версия LeRobot 0.6.0.
Ограничения: результаты замеров точности (evaluation) на реальном роботе в карточке пока не представлены.
Требования: для запуска инференса на роботе требуются две камеры с разрешением 640×480 и частотой 30 FPS, имена которых соответствуют ключам overhead и wrist.
Discuss Telegram 0 30

Will it run?

Runs in F32

Fits without quantisation.

  • F32weights 0.2 GB · ready files0.7 GB
  • BF16weights 0.1 GB0.6 GB
  • FP8 / INT8recommendedweights 0.0 GB0.6 GB
  • 4-bitweights 0.0 GB0.5 GB

Tip: go 8-bit.FP8 / INT8 is within about a percent of full precision in quality, takes half the memory and runs faster on RTX 40/50 and H100. Full precision only pays off for fine-tuning.

What to get for this model

Massed ComputeOpen Massed Compute

Your own GPU: FP8 / INT8 — from RTX 2060 · F32 — from RTX 2060

Massed Compute hourly prices, November 2026. The discounted price applies with the coupon at checkout.

Estimate: weights plus working memory. Long videos, high resolutions and long contexts need more.

Run it on Massed Compute

The script downloads the model to the rented machine. How to run it is in the model card.

  1. 1. Rent a machine with a fitting GPU

    Open Massed Compute
  2. 2. Paste the script into the machine's terminal

    Connect over SSH (the Massed Compute panel shows the command) or open a terminal on the machine's desktop.

    HF_TOKEN / CIVITAI_TOKENThe script starts with token lines: paste yours between the quotes. The Hugging Face token is for gated models, the Civitai one for Civitai models.

    # Rlayd36/act_pickandplace_cube
    mkdir -p ~/models
    curl -LsSf https://astral.sh/uv/install.sh | sh
    source "$HOME/.local/bin/env"
    uv tool install "huggingface_hub[cli]"
    hf download Rlayd36/act_pickandplace_cube --local-dir ~/models/act_pickandplace_cube
    # The model is in ~/models. How to run it is in the model card (link above).
    Add more LoRAs to act_pickandplace_cube
  3. 3. Use it

    The model is in ~/models. How to run it is in the model card (link above).

Stop the machine in the panel when you are done: it bills by the minute while it runs.

How to speed it up

Picked for this model type. Choose your hardware above to see what fits you exactly.

  • FlashAttention 44.0.0b40from November 18, 2026new release

    fastest exact attention on B200

    Kernels for Blackwell (beta). Exact attention without quantisation — fine for everything, LLMs included.

    How to enable: pip install flash-attn-4; vLLM and SGLang pick it up themselves.

    Earlier generations (2)
    • FlashAttention 3 — The Hopper (H100/H200) version with FP8.
    • FlashAttention 2 — The standard for RTX 30/40/50 and A100: exact attention without the memory cost of long contexts.
  • torch.compile2.15.0from October 28, 2026new release

    10–30% for free

    Compiles the model for your GPU. Slower first run, faster afterwards.

    How to enable: model = torch.compile(model); in ComfyUI the TorchCompileModel node.

Model family

New posts about versions of act_pickandplace_cube (quants, finetunes, LoRAs) will show up under the bell.

No known relatives of this model yet. All derivatives on Hugging Face

About the model

Rlayd36/act_pickandplace_cube
Author
Rlayd36
Category
Robotics
Released
Posted

On NeyroLearn

Hugging Face

300

Ask AI about this model

Answered by Gemini 4 · the chat is kept only in this tab

Comments