Skip to content
Robotics

dit_so101_pick_place_v10_gpuaug

политика управления роботом-манипулятором

2 min read

Модель представляет собой политику имитационного обучения (алгоритм управления роботом по демонстрациям) для выполнения задачи захвата и перемещения предметов. Она построена на базе архитектуры Multi-Task Diffusion Transformer (DiT — диффузионный трансформер с поддержкой текстовых и визуальных подсказок) и обучена в фреймворке LeRobot от Hugging Face. Модель принимает данные о текущем положении шести осей робота и видеопотоки с трёх камер, а на выходе выдаёт команды движения для манипулятора so_follower. Подойдёт разработчикам и энтузиастам робототехники, работающим с платформой SO-101 и библиотекой LeRobot.

Ключевые особенности

  • Архитектура Multi-Task DiT: сочетает диффузионную политику с текстовым и визуальным обуславливанием для точной моторики.
  • Мультимодальный вход: обрабатывает вектор состояния из 6 координат и изображения разрешением 640×480 с трёх ракурсов (top, center, wrist).
  • Обучение на реальных демонстрациях: натренирована на 80 эпизодах (26 147 кадров при 30 FPS) из датасета so101_pick_place_v10_clean.
  • Интеграция с LeRobot: готова к прямому запуску и дообучению через стандартные CLI-утилиты lerobot-rollout и lerobot-train.

Что можно сделать

  • Запустить автономное перекладывание квадратного строительного блока в подходящую миску на роботе so_follower (SO-101) по текстовой команде на немецком языке.
  • Использовать чекпоинт как отправную точку или ориентир при обучении собственных политик multi_task_dit в LeRobot v0.7.1.

Пример

lerobot-rollout \
  --strategy.type=base \
  --robot.type=so_follower \
  --robot.port= \
  --policy.path=HugRalf42/dit_so101_pick_place_v10_gpuaug \
  --task="Nimm den quadratischen Baustein und lege ihn in die passende Schüssel" \
  --duration=60
ПодробнееПараметры: 0.23B (230 млн).
Обучение: 8 180 шагов, batch size 128, оптимизатор Adam (lr 2e-05), LeRobot 0.7.1.
Оценка: результаты замеров на реальном роботе в карточке пока не опубликованы.
Discuss Telegram 0

Will it run?

Working out the memory needs

The bot is still collecting this model's weight sizes; the estimate will appear here in a few minutes. Meanwhile you can rent a GPU with headroom.

Massed ComputeOpen Massed Compute

Run it on Massed Compute

The script downloads the model to the rented machine. How to run it is in the model card.

  1. 1. Rent a machine with a fitting GPU

    Open Massed Compute
  2. 2. Paste the script into the machine's terminal

    Connect over SSH (the Massed Compute panel shows the command) or open a terminal on the machine's desktop.

    HF_TOKEN / CIVITAI_TOKENThe script starts with token lines: paste yours between the quotes. The Hugging Face token is for gated models, the Civitai one for Civitai models.

    # HugRalf42/dit_so101_pick_place_v10_gpuaug
    # ===== Tokens: paste yours between the quotes =====
    export HF_TOKEN=""        # huggingface.co/settings/tokens, for gated models
    # ==========================================
    mkdir -p ~/models
    curl -LsSf https://astral.sh/uv/install.sh | sh
    source "$HOME/.local/bin/env"
    uv tool install "huggingface_hub[cli]"
    hf download HugRalf42/dit_so101_pick_place_v10_gpuaug --local-dir ~/models/dit_so101_pick_place_v10_gpuaug
    # The model is in ~/models. How to run it is in the model card (link above).
  3. 3. Use it

    The model is in ~/models. How to run it is in the model card (link above).

Stop the machine in the panel when you are done: it bills by the minute while it runs.

How to speed it up

Picked for this model type. Choose your hardware above to see what fits you exactly.

  • FlashAttention 44.0.0b40from November 18, 2026new release

    fastest exact attention on B200

    Kernels for Blackwell (beta). Exact attention without quantisation — fine for everything, LLMs included.

    How to enable: pip install flash-attn-4; vLLM and SGLang pick it up themselves.

    Earlier generations (2)
    • FlashAttention 3 — The Hopper (H100/H200) version with FP8.
    • FlashAttention 2 — The standard for RTX 30/40/50 and A100: exact attention without the memory cost of long contexts.
  • torch.compile2.15.0from October 28, 2026new release

    10–30% for free

    Compiles the model for your GPU. Slower first run, faster afterwards.

    How to enable: model = torch.compile(model); in ComfyUI the TorchCompileModel node.

Model family

New posts about versions of dit_so101_pick_place_v10_gpuaug (quants, finetunes, LoRAs) will show up under the bell.

No known relatives of this model yet. All derivatives on Hugging Face

About the model

HugRalf42/dit_so101_pick_place_v10_gpuaug
Author
HugRalf42
Category
Robotics
Released
Posted

On NeyroLearn

Hugging Face

00

Ask AI about this model

Answered by Gemini 4 · the chat is kept only in this tab

Comments