Skip to content
Robotics

smolvla_so101_single_block

политика управления роботом для перекладывания кубика

2 min readupdated

Модель представляет собой обученную политику (алгоритм управления действиями робота) для манипулятора типа so_follower (SO-101). Она решает конкретную физическую задачу: по текстовой инструкции и картинке с камер взять кубик и положить его в коробку. В основе лежит компактная VLA-архитектура (Vision-Language-Action — модель, объединяющая зрение, язык и действия) SmolVLA объёмом 0.45B параметров, созданная для работы на потребительском железе. Обучена пользователем freezino с помощью фреймворка LeRobot. Пригодится разработчикам и энтузиастам робототехники для запуска на совместимом манипуляторе или дообучения под свои сценарии.

Ключевые особенности

  • Использует визуальные данные с нескольких камер (разрешение 256×256) и вектор состояния робота из 6 значений.
  • На выходе выдаёт вектор действий размерностью 6 для управления приводами манипулятора.
  • Обучена на датасете freezino/so101_single_block, состоящем из 50 эпизодов (12 188 кадров при 30 FPS).
  • Компактный размер 0.45B позволяет запускать модель локально без серверных видеокарт.

Что можно сделать

  • Развернуть готовую политику на физическом манипуляторе so_follower с двумя подключёнными камерами для выполнения задачи перекладывания объекта.
  • Использовать чекпоинт и конфигурацию обучения в LeRobot как отправную точку для тренировки собственных сценариев захвата и перемещения предметов.

Пример

lerobot-rollout \
  --strategy.type=base \
  --robot.type=so_follower \
  --robot.port= \
  --robot.cameras="{ camera1: {type: opencv, index_or_path: 0, width: 640, height: 480, fps: 30}, camera2: {type: opencv, index_or_path: 1, width: 640, height: 480, fps: 30}}" \
  --policy.path=freezino/smolvla_so101_single_block \
  --task="Pick up the block and put it in the box." \
  --duration=60
ПодробнееОбучение: 20 000 шагов, batch size 64, оптимизатор AdamW, learning rate 0.0001.
Версия библиотеки: LeRobot 0.6.2.
Результаты оценки (Evaluation) на реальном роботе в карточке пока не опубликованы.
Discuss Telegram 0 29

Will it run?

Runs in BF16

Fits without quantisation.

  • BF16weights 0.8 GB · ready files1.4 GB
  • FP8 / INT8recommendedweights 0.4 GB1.0 GB
  • 4-bitweights 0.2 GB0.8 GB

Tip: go 8-bit.FP8 / INT8 is within about a percent of full precision in quality, takes half the memory and runs faster on RTX 40/50 and H100. Full precision only pays off for fine-tuning.

What to get for this model

Massed ComputeOpen Massed Compute

Your own GPU: FP8 / INT8 — from RTX 2060 · BF16 — from RTX 2060

Massed Compute hourly prices, November 2026. The discounted price applies with the coupon at checkout.

Estimate: weights plus working memory. Long videos, high resolutions and long contexts need more.

Run it on Massed Compute

The script downloads the model to the rented machine. How to run it is in the model card.

  1. 1. Rent a machine with a fitting GPU

    Open Massed Compute
  2. 2. Paste the script into the machine's terminal

    Connect over SSH (the Massed Compute panel shows the command) or open a terminal on the machine's desktop.

    HF_TOKEN / CIVITAI_TOKENThe script starts with token lines: paste yours between the quotes. The Hugging Face token is for gated models, the Civitai one for Civitai models.

    # freezino/smolvla_so101_single_block
    mkdir -p ~/models
    curl -LsSf https://astral.sh/uv/install.sh | sh
    source "$HOME/.local/bin/env"
    uv tool install "huggingface_hub[cli]"
    hf download freezino/smolvla_so101_single_block --local-dir ~/models/smolvla_so101_single_block
    # The model is in ~/models. How to run it is in the model card (link above).
  3. 3. Use it

    The model is in ~/models. How to run it is in the model card (link above).

Stop the machine in the panel when you are done: it bills by the minute while it runs.

How to speed it up

Picked for this model type. Choose your hardware above to see what fits you exactly.

  • FlashAttention 44.0.0b40from November 18, 2026new release

    fastest exact attention on B200

    Kernels for Blackwell (beta). Exact attention without quantisation — fine for everything, LLMs included.

    How to enable: pip install flash-attn-4; vLLM and SGLang pick it up themselves.

    Earlier generations (2)
    • FlashAttention 3 — The Hopper (H100/H200) version with FP8.
    • FlashAttention 2 — The standard for RTX 30/40/50 and A100: exact attention without the memory cost of long contexts.
  • torch.compile2.15.0from October 28, 2026new release

    10–30% for free

    Compiles the model for your GPU. Slower first run, faster afterwards.

    How to enable: model = torch.compile(model); in ComfyUI the TorchCompileModel node.

Model family

New posts about versions of smolvla_so101_single_block (quants, finetunes, LoRAs) will show up under the bell.

No known relatives of this model yet. All derivatives on Hugging Face

About the model

freezino/smolvla_so101_single_block
Author
freezino
Category
Robotics
Released
Posted

On NeyroLearn

Hugging Face

290

Ask AI about this model

Answered by Gemini 4 · the chat is kept only in this tab

Comments