Skip to content
Other

MiniMax H3 ComfyUI Repack

готовые файлы и workflow для видео в ComfyUI

1 min read

Это репозиторий vftfnn с перепакованными файлами MiniMax H3 для ComfyUI. Внутри — diffusion-модели fl2va и ref2va в разных квантованиях, текст-энкодер Qwen3-VL-32B, LoRA turbo, VAE, ControlNet Union и embeddings. Размер и число параметров в карточке не указаны.

Ключевые особенности

  • Diffusion-файлы в bf16, int8_convrot, pruned, w6a8 и fp8_scaled для fl2va и ref2va.
  • Текст-энкодер Qwen3-VL-32B в bf16, int8_convrot и nvfp4_awq; nvfp4_awq не требует Blackwell GPU.
  • LoRA turbo: 4 и 8 шагов для fl2v, 4 шага для ref2v.
  • В комплекте видео- и аудио-VAE, ControlNet Union и 10 embeddings.
  • Есть workflow для text-to-video, image-to-video, reference-to-video, multiframe reference и ControlNet Union.

Пример

Embedding вызывается в CLIPTextEncode так:

embedding:minimaxh3_art_is_explosion

Имя после embedding: заменяется на нужный файл.

Подробнееnvfp4 text encoder не требует Blackwell GPU.
Для diffusion рекомендуется int8_convrot при PyTorch с cu130; fp8_scaled — только если int8_convrot недоступен.
Файлы раскладываются по models/diffusion_models, text_encoders, loras, vae, model_patches и embeddings.
В карточке есть ссылки на workflow Comfy-Org и документацию ComfyUI.
Примеры
Discuss Telegram 0 85

Will it run?

Runs in 4-bit

Full precision does not fit, a quantised version does: quality barely changes down to 8 bits, more noticeably at 4 bits.

  • BF16weights 48 GB · ready files53 GB
  • FP8 / INT8recommendedweights 24 GB27 GB
  • 4-bitweights 13 GB15 GB

Tip: go 8-bit.FP8 / INT8 is within about a percent of full precision in quality, takes half the memory and runs faster on RTX 40/50 and H100. Full precision only pays off for fine-tuning.

Estimate: weights plus working memory. Long videos, high resolutions and long contexts need more.

Run it on Massed Compute

A ready script for the machine we advise above: paste it and the model downloads and starts.

  1. 1. Rent RTX A6000

    $0.43 an hour with the coupon. Pick the Ubuntu image when you create the machine.

    Open Massed Compute
  2. 2. Paste the script into the machine's terminal

    Connect over SSH (the Massed Compute panel shows the command) or open a terminal on the machine's desktop.

    HF_TOKEN / CIVITAI_TOKENThe script starts with token lines: paste yours between the quotes. The Hugging Face token is for gated models, the Civitai one for Civitai models.

    #!/usr/bin/env bash
    # MiniMax-H3-ComfyOrg
    set -e
    # NVIDIA driver: CUDA 13 needs 580+. If older or missing, the current nvidia-open is installed (keep yours: KEEP_DRIVER=1)
    DRV=$(nvidia-smi --query-gpu=driver_version --format=csv,noheader 2>/dev/null | head -1 | cut -d. -f1)
    case "$DRV" in ""|*[!0-9]*) DRV=0 ;; esac
    if [ "$DRV" -lt 580 ] && [ -z "${KEEP_DRIVER:-}" ]; then
      . /etc/os-release && \
      curl -fsSLO "https://developer.download.nvidia.com/compute/cuda/repos/ubuntu${VERSION_ID//./}/x86_64/cuda-keyring_1.1-1_all.deb" && \
      sudo dpkg -i cuda-keyring_1.1-1_all.deb && rm -f cuda-keyring_1.1-1_all.deb && \
      sudo apt-get update && \
      sudo DEBIAN_FRONTEND=noninteractive apt-get install -y nvidia-open || \
      { echo "Could not install the NVIDIA driver: see the error above. To keep the current one, run with KEEP_DRIVER=1."; exit 1; }
      echo "NVIDIA driver updated. Reboot the machine (sudo reboot) and run this same script again."
      exit 0
    fi
    curl -LsSf https://astral.sh/uv/install.sh | sh
    source "$HOME/.local/bin/env"
    # CUDA 13+ → int8_convrot (Comfy-Org's advice), else fp8_scaled
    CU=$(nvidia-smi | grep -oP 'CUDA Version: \K[0-9]+' || echo 12)
    [ "$CU" -ge 13 ] && TORCH=cu130 || TORCH=cu128
    [ -d ~/ComfyUI ] || git clone https://github.com/comfyanonymous/ComfyUI ~/ComfyUI
    cd ~/ComfyUI
    uv venv --python 3.12 --allow-existing && source .venv/bin/activate
    uv pip install torch torchvision torchaudio --index-url https://download.pytorch.org/whl/$TORCH
    uv pip install -r requirements.txt "huggingface_hub[cli]"
    # Base files: MiniMax H3, 8-bit
    if [ "$CU" -ge 13 ]; then
      hf download Comfy-Org/MiniMax-H3 text_encoders/qwen3vl_32b_minimax_h3_int8_convrot.safetensors vae/minimax_h3_video_vae_fp16.safetensors vae/minimax_h3_audio_vae_fp32.safetensors --local-dir models
    else
      hf download Comfy-Org/MiniMax-H3 text_encoders/qwen3vl_32b_minimax_h3_nvfp4_awq.safetensors vae/minimax_h3_video_vae_fp16.safetensors vae/minimax_h3_audio_vae_fp32.safetensors --local-dir models
    fi
    # Main model: MiniMax-H3-ComfyOrg
    hf download vftfnn/MiniMax-H3-ComfyOrg text_encoders/qwen3vl_32b_minimax_h3_bf16.safetensors --local-dir models/diffusion_models
    # 16-bit model: ComfyUI holds it in 8 bits (--fp8_e4m3fn-unet), half the memory
    # Start ComfyUI. From your computer: ssh -L 8188:localhost:8188 user@IP, then http://localhost:8188
    python main.py --listen 127.0.0.1 --port 8188 --fp8_e4m3fn-unet
    Add more LoRAs to MiniMax-H3-ComfyOrg
  3. 3. Use it

    From your computer: ssh -L 8188:localhost:8188 user@machine-IP, then open http://localhost:8188. Or open that address in the browser on the machine's desktop. The model's workflow is usually in its Hugging Face card.

Stop the machine in the panel when you are done: it bills by the minute while it runs.

How to speed it up

Picked for this model type. Choose your hardware above to see what fits you exactly.

  • FlashAttention 44.0.0b40from November 18, 2026new release

    fastest exact attention on B200

    Kernels for Blackwell (beta). Exact attention without quantisation — fine for everything, LLMs included.

    How to enable: pip install flash-attn-4; vLLM and SGLang pick it up themselves.

    Earlier generations (2)
    • FlashAttention 3 — The Hopper (H100/H200) version with FP8.
    • FlashAttention 2 — The standard for RTX 30/40/50 and A100: exact attention without the memory cost of long contexts.
  • torch.compile2.15.0from October 28, 2026new release

    10–30% for free

    Compiles the model for your GPU. Slower first run, faster afterwards.

    How to enable: model = torch.compile(model); in ComfyUI the TorchCompileModel node.

MiniMax H3 prompts

All prompts

Ready prompts with the resulting video: copy and try.

Model family

New posts about versions of MiniMax-H3 (quants, finetunes, LoRAs) will show up under the bell.

Quantised versions 12All on Hugging Face
Fine-tunes 12All on Hugging Face
LoRAs and adapters 12All on Hugging Face
Merges 3All on Hugging Face

About the model

vftfnn/MiniMax-H3-ComfyOrg
Author
vftfnn
Category
Other
Released
Posted

On NeyroLearn

Hugging Face

850

Ask AI about this model

Answered by Gemini 4 · the chat is kept only in this tab

Comments