Skip to content
Other

Minimax-h3 Singularity x 10Eros-Max PRISM

merge двух файнтюнов без mergekit

1 min readupdated

Это объединение двух файнтюнов Minimax-H3 Ref2VA: WarmBloodAban/Minimax-h3_Singularity и TenStrip/10Eros-Max (8-step turbo). Смерж сделан собственным алгоритмом PRISM, веса доступны в fp16; лицензия наследуется от исходных моделей.

Ключевые особенности

  • База — два Ref2VA-файнтюна Minimax-H3, включая 8-step turbo-вариант.
  • PRISM использует spectral denoise, polar geodesic, sign-conflict mediation и magnitude re-anchor — без mergekit.
  • В карточке есть тесты int8/int8HQ и рекомендации по 8-step генерации.
  • Для low-VRAM предусмотрен вариант PRISM_DMAD_PDMD_w6a8_g32.safetensors.
  • Лицензию нужно проверять у исходных моделей перед использованием.

Пример

Сценарий из карточки: взять PRISM_DMAD_PDMD_int8.safetensors, 8 steps, без Turbo LoRA, sampler Euler/Beta57 и Shift 12/3. Автор называет этот вариант лучшим out-of-the-box для реалистичных детализированных текстур кожи; для слабых GPU есть w6a8_g32-версия.

ПодробнееВеса: fp16, плюс int8/int8HQ и low-VRAM w6a8_g32.
В карточке: 221 лайк и 256 477 скачиваний.
Точные требования к VRAM не указаны — ориентируйтесь на low-VRAM вариант.
Лицензия follows source models: проверьте исходные карточки.
Видео-примеры
Discuss Telegram 379 573K

Will it run?

Runs in 4-bit

Full precision does not fit, a quantised version does: quality barely changes down to 8 bits, more noticeably at 4 bits.

  • FP16weights 62 GB · ready files68 GB
  • FP8 / INT8recommendedweights 31 GB34 GB
  • 4-bitweights 17 GB20 GB

Tip: go 8-bit.FP8 / INT8 is within about a percent of full precision in quality, takes half the memory and runs faster on RTX 40/50 and H100. Full precision only pays off for fine-tuning.

Estimate: weights plus working memory. Long videos, high resolutions and long contexts need more.

Run it on Massed Compute

A ready script for the machine we advise above: paste it and the model downloads and starts.

  1. 1. Rent RTX A6000

    $0.43 an hour with the coupon. Pick the Ubuntu image when you create the machine.

    Open Massed Compute
  2. 2. Paste the script into the machine's terminal

    Connect over SSH (the Massed Compute panel shows the command) or open a terminal on the machine's desktop.

    HF_TOKEN / CIVITAI_TOKENThe script starts with token lines: paste yours between the quotes. The Hugging Face token is for gated models, the Civitai one for Civitai models.

    #!/usr/bin/env bash
    # Minimax-h3_Singularity-x-10Eros-Max_PRISM
    set -e
    # NVIDIA driver: CUDA 13 needs 580+. If older or missing, the current nvidia-open is installed (keep yours: KEEP_DRIVER=1)
    DRV=$(nvidia-smi --query-gpu=driver_version --format=csv,noheader 2>/dev/null | head -1 | cut -d. -f1)
    case "$DRV" in ""|*[!0-9]*) DRV=0 ;; esac
    if [ "$DRV" -lt 580 ] && [ -z "${KEEP_DRIVER:-}" ]; then
      . /etc/os-release && \
      curl -fsSLO "https://developer.download.nvidia.com/compute/cuda/repos/ubuntu${VERSION_ID//./}/x86_64/cuda-keyring_1.1-1_all.deb" && \
      sudo dpkg -i cuda-keyring_1.1-1_all.deb && rm -f cuda-keyring_1.1-1_all.deb && \
      sudo apt-get update && \
      sudo DEBIAN_FRONTEND=noninteractive apt-get install -y nvidia-open || \
      { echo "Could not install the NVIDIA driver: see the error above. To keep the current one, run with KEEP_DRIVER=1."; exit 1; }
      echo "NVIDIA driver updated. Reboot the machine (sudo reboot) and run this same script again."
      exit 0
    fi
    curl -LsSf https://astral.sh/uv/install.sh | sh
    source "$HOME/.local/bin/env"
    # CUDA 13+ → int8_convrot (Comfy-Org's advice), else fp8_scaled
    CU=$(nvidia-smi | grep -oP 'CUDA Version: \K[0-9]+' || echo 12)
    [ "$CU" -ge 13 ] && TORCH=cu130 || TORCH=cu128
    [ -d ~/ComfyUI ] || git clone https://github.com/comfyanonymous/ComfyUI ~/ComfyUI
    cd ~/ComfyUI
    uv venv --python 3.12 --allow-existing && source .venv/bin/activate
    uv pip install torch torchvision torchaudio --index-url https://download.pytorch.org/whl/$TORCH
    uv pip install -r requirements.txt "huggingface_hub[cli]"
    # Base files: MiniMax H3, 8-bit
    if [ "$CU" -ge 13 ]; then
      hf download Comfy-Org/MiniMax-H3 text_encoders/qwen3vl_32b_minimax_h3_int8_convrot.safetensors vae/minimax_h3_video_vae_fp16.safetensors vae/minimax_h3_audio_vae_fp32.safetensors --local-dir models
    else
      hf download Comfy-Org/MiniMax-H3 text_encoders/qwen3vl_32b_minimax_h3_nvfp4_awq.safetensors vae/minimax_h3_video_vae_fp16.safetensors vae/minimax_h3_audio_vae_fp32.safetensors --local-dir models
    fi
    # Main model: Minimax-h3_Singularity-x-10Eros-Max_PRISM
    hf download OliviaRossi/Minimax-h3_Singularity-x-10Eros-Max_PRISM Minimax-h3_Singularity_x_10Eros-Max_PRISM_fp16.safetensors --local-dir models/diffusion_models
    # 16-bit model: ComfyUI holds it in 8 bits (--fp8_e4m3fn-unet), half the memory
    # Start ComfyUI. From your computer: ssh -L 8188:localhost:8188 user@IP, then http://localhost:8188
    python main.py --listen 127.0.0.1 --port 8188 --fp8_e4m3fn-unet
  3. 3. Use it

    From your computer: ssh -L 8188:localhost:8188 user@machine-IP, then open http://localhost:8188. Or open that address in the browser on the machine's desktop. The model's workflow is usually in its Hugging Face card.

Stop the machine in the panel when you are done: it bills by the minute while it runs.

How to speed it up

Picked for this model type. Choose your hardware above to see what fits you exactly.

  • FlashAttention 44.0.0b40from November 18, 2026new release

    fastest exact attention on B200

    Kernels for Blackwell (beta). Exact attention without quantisation — fine for everything, LLMs included.

    How to enable: pip install flash-attn-4; vLLM and SGLang pick it up themselves.

    Earlier generations (2)
    • FlashAttention 3 — The Hopper (H100/H200) version with FP8.
    • FlashAttention 2 — The standard for RTX 30/40/50 and A100: exact attention without the memory cost of long contexts.
  • torch.compile2.15.0from October 28, 2026new release

    10–30% for free

    Compiles the model for your GPU. Slower first run, faster afterwards.

    How to enable: model = torch.compile(model); in ComfyUI the TorchCompileModel node.

MiniMax H3 prompts

All prompts

Ready prompts with the resulting video: copy and try.

Model family

  1. MiniMax-H3family root
  2. Minimax-h3_Singularity
  3. Minimax-h3_Singularity-x-10Eros-Max_PRISM

New posts about versions of MiniMax-H3 (quants, finetunes, LoRAs) will show up under the bell.

Quantised versions 12All on Hugging Face
Fine-tunes 12All on Hugging Face
LoRAs and adapters 12All on Hugging Face
Merges 3All on Hugging Face

About the model

OliviaRossi/Minimax-h3_Singularity-x-10Eros-Max_PRISM
Author
OliviaRossi
Category
Other
Released
Posted

On NeyroLearn

Hugging Face

573K379

Ask AI about this model

Answered by Gemini 4 · the chat is kept only in this tab

Comments