Skip to content
Video

MiniMax-H3-Duo-AIPod

генерация видео со звуком на двух Jetson AGX Thor

2 min read

MiniMax-H3-Duo-AIPod (версия 0.2.1) — это портированная версия модели генерации видео со звуком MiniMax H3, адаптированная автором manateelazycat для работы на связке из двух плат NVIDIA Jetson AGX Thor. В основе лежит двухмашинный параллелизм (sequence parallel, распределение вычислений по двум устройствам) поверх четырёх оптических портов по 25 Гбит/с. В отличие от оригинальной сборки для DGX Spark, здесь используется специальный TCP-адаптер на четыре линка с проверкой консистентности данных CUDA, так как на Jetson AGX Thor отсутствует RDMA. Решение упаковано в формат LPK для платформы LazyCat AI Pod (требуется версия 2.3.304 и выше) и пригодится владельцам таких кластеров для локального синтеза коротких роликов по текстовому описанию.

Ключевые особенности

  • Двухмашинный кластер: распределяет инференс между двумя Jetson AGX Thor через четыре 25-гигабитных оптических канала (суммарно до 100 Гбит/с).
  • Видео со звуковой дорожкой: по текстовому запросу формирует ролик 832×480 на 56 кадров при 24 fps (около 2,33 секунды) с синхронным аудио, идентичным побитово эталонному референсу.
  • Готовый пакет для AI Pod: распространяется как LPK-приложение (cloud.lazycat.aipod.minimax-h3-duo) с REST API и управлением через Docker и Model Host.
  • Исправление остановки контейнеров: в версии 0.2.1 устранена ошибка сбоя при освобождении ресурсов старых моделей и корректно обрабатываются контейнеры без исходных каталогов.

Что можно сделать

  • Локальный синтез коротких сцен: развернуть сервис на паре Jetson AGX Thor и генерировать ролики со звуком по текстовому промпту для прототипирования или внутренних медиазадач.
  • Интеграция через REST API: подключить эндпоинты POST /v2/video_generation и GET /v2/query/video_generation/{task_id} с Bearer-авторизацией в собственный бэкенд или бота.

Пример

{
  "model": "MiniMax-H3-Duo",
  "prompt": "A small red sailboat on a calm lake at sunrise, gentle water and breeze.",
  "width": 832,
  "height": 480,
  "frames": 56,
  "steps": 20,
  "seed": 20260928
}
ПодробнееСкорость: медиана полной генерации 37,77–39,14 с (20 шагов сэмплирования — 33,38–33,70 с) на прогретом кэше; первый холодный запрос с пустым CUDA-кэшем занимает 222,66 с (или 91,62 с с восстановленным кэшем драйвера ~7 МБ), загрузка модели — 32,27 с.
Требования: две платы Jetson AGX Thor, соединённые четырьмя оптическими линиями по 25 Гбит/с, и AI Pod / Agent версии не ниже 2.3.304.
Ограничения: поддерживается только text-to-video в однопоточном режиме; референсные изображения, референсное аудио и LoRA в этой сборке не открыты.
Лицензия: веса распространяются по MiniMax H3 Community License.
Discuss 1 1.7K

Will it run?

Runs in 4-bit

Full precision does not fit, a quantised version does: quality barely changes down to 8 bits, more noticeably at 4 bits.

  • FP16weights 51 GB · ready files62 GB
  • FP8 / INT8recommendedweights 26 GB32 GB
  • 4-bitweights 14 GB20 GB

Tip: go 8-bit.FP8 / INT8 is within about a percent of full precision in quality, takes half the memory and runs faster on RTX 40/50 and H100. Full precision only pays off for fine-tuning.

Estimate: weights plus working memory. Long videos, high resolutions and long contexts need more.

Run it on Massed Compute

The script downloads the model to the rented machine. How to run it is in the model card.

  1. 1. Rent a machine with a fitting GPU

    Open Massed Compute
  2. 2. Paste the script into the machine's terminal

    Connect over SSH (the Massed Compute panel shows the command) or open a terminal on the machine's desktop.

    HF_TOKEN / CIVITAI_TOKENThe script starts with token lines: paste yours between the quotes. The Hugging Face token is for gated models, the Civitai one for Civitai models.

    # manateelazycat/MiniMax-H3-Duo-AIPod
    mkdir -p ~/models
    curl -LsSf https://astral.sh/uv/install.sh | sh
    source "$HOME/.local/bin/env"
    uv tool install "huggingface_hub[cli]"
    hf download manateelazycat/MiniMax-H3-Duo-AIPod --local-dir ~/models/MiniMax-H3-Duo-AIPod
    # The model is in ~/models. How to run it is in the model card (link above).
    Add more LoRAs to MiniMax-H3-Duo-AIPod
  3. 3. Use it

    The model is in ~/models. How to run it is in the model card (link above).

Stop the machine in the panel when you are done: it bills by the minute while it runs.

How to speed it up

Picked for this model type. Choose your hardware above to see what fits you exactly.

  • SageAttention 3v2.2.0from October 28, 2025

    even faster on RTX 50 / Blackwell

    FP4 attention for Blackwell. Faster than SageAttention 2, but the authors suggest v2 when accuracy matters.

    How to enable: Build from the sageattention3_blackwell folder of the repo; in ComfyUI via KJNodes.

    Earlier generations (2)
    • SageAttention 2++ — Quantised (INT8/FP8) attention with no visible quality loss. The main speed-up for image and video generation.
    • SageAttention 1 — First version: INT8 for Q·K. Still works, but 2++ is faster and more accurate.
  • FlashAttention 44.0.0b40from November 18, 2026new release

    fastest exact attention on B200

    Kernels for Blackwell (beta). Exact attention without quantisation — fine for everything, LLMs included.

    How to enable: pip install flash-attn-4; vLLM and SGLang pick it up themselves.

    Earlier generations (3)
    • FlashAttention 3 — The Hopper (H100/H200) version with FP8.
    • FlashAttention 2 — The standard for RTX 30/40/50 and A100: exact attention without the memory cost of long contexts.
    • xFormers — The older way to speed up attention, works almost everywhere. Sage or Flash are faster where available.
  • cache-dit (DBCache)v1.5.6from November 20, 2026new release

    1.5–3× at nearly the same quality

    Reuses block outputs between diffusion steps. Supports most DiT models.

    How to enable: pip install cache-dit; one line cache_dit.enable_cache(pipe) for diffusers.

    Earlier generations (2)
    • MagCache — Skips steps by magnitude of change. More accurate than TeaCache, no calibration.
    • TeaCache — The first popular diffusion step cache. Works, newer methods are more accurate.
  • LightX2V step distill0.6.1from November 9, 2026new release

    5–10× fewer steps

    Distilled LoRAs and an engine: video in 4–8 steps instead of 30–50.

    How to enable: Load their step-distill LoRA, CFG 1.0, 4–8 steps.

  • torch.compile2.15.0from October 28, 2026new release

    10–30% for free

    Compiles the model for your GPU. Slower first run, faster afterwards.

    How to enable: model = torch.compile(model); in ComfyUI the TorchCompileModel node.

MiniMax H3 prompts

All prompts

Ready prompts with the resulting video: copy and try.

Model family

New posts about versions of MiniMax-H3-Duo-AIPod (quants, finetunes, LoRAs) will show up under the bell.

No known relatives of this model yet. All derivatives on Hugging Face

About the model

manateelazycat/MiniMax-H3-Duo-AIPod
Author
manateelazycat
Category
Video
Released
Posted

On NeyroLearn

Hugging Face

1.7K1

Ask AI about this model

Answered by Gemini 4 · the chat is kept only in this tab

Comments