Skip to content
Images

MiniMax-H3-Image fp8-nvfp4

быстрые квантованные версии под ComfyUI

2 min readupdated

Репозиторий содержит две облегчённые версии диффузионного трансформера MiniMax-H3-Image для генерации изображений по тексту в ComfyUI, подготовленные автором LSDJesus на основе bf16-чекпоинта от Comfy-Org. Квантование (сжатие весов модели для экономии видеопамяти и ускорения работы) позволяет запускать тяжёлую модель локально: версия fp8 весит 21,0 ГБ, а формат NVFP4 сжимает её до 12,5 ГБ. Файлы полностью совместимы со стандартными воркфлоу и загрузчиками ComfyUI, выступая прямой заменой официальным int8 и w4a8 сборкам. Релиз пригодится владельцам видеокарт NVIDIA RTX 40 и 50 серий, которые хотят генерировать картинки в высоком разрешении (2048×2048) за 6 шагов.

Ключевые особенности

  • Высокая скорость на RTX 50: вариант NVFP4 выдаёт 3,4 шага в секунду в разрешении 2048×2048 на карте RTX PRO 6000 Blackwell, обгоняя официальные сборки int8 ConvRot (2,6 шага/с) и w4a8 (2,5 шага/с).
  • Два формата под разное железо: fp8_scaled (21,0 ГБ) нативно работает на RTX 40 и RTX 50 (2,1 шага/с), а nvfp4 (12,5 ГБ) оптимизирован под архитектуру Blackwell (RTX 50), но запускается и на других картах через эмуляцию в ComfyUI.
  • Аккуратное квантование: сжаты 200 линейных слоёв в 50 блоках трансформера (95,8% всех весов), при этом критически важные слои проекций, нормализации и настройки 6-шагового расписания PDD оставлены в исходной точности bf16.
  • Защита от искажений в fp8: для слоёв mlp.fc2 включено матричное умножение в полной точности (bf16), что убирает сильный дрейф композиции и искажения текста на изображениях.

Что можно сделать

  • Генерировать детализированные изображения 2048×2048: запускать быструю 6-шаговую генерацию по текстовым промптам, включая сцены с читаемым текстом и вывесками, используя стандартный шаблон MiniMax H3 Image в ComfyUI.
  • Заменить официальные веса без переделки графа: подставить minimax_h3_image_pruned_nvfp4.safetensors или fp8_scaled.safetensors в готовый воркфлоу от Comfy-Org вместо int8-версии для прироста скорости или экономии места на диске.

Пример

Для запуска обновите ComfyUI до версии 0.44 (с поддержкой MiniMax-H3-Image от 10 ноября 2026 года), скачайте текстовый энкодер (qwen3vl_32b_minimax_h3_nvfp4_awq или _int8_convrot) и VAE (minimax_h3_image_vae_fp16) из репозитория Comfy-Org. Поместите выбранный .safetensors файл в папку models/diffusion_models/, откройте встроенный шаблон MiniMax H3 Image и выберите модель в ноде Load Diffusion Model.

Подробнее Размеры и скорость (2048×2048, RTX PRO 6000 Blackwell): fp8_scaled — 21,0 ГБ (2,1 steps/s), NVFP4 — 12,5 ГБ (3,4 steps/s).
Требуется ComfyUI 0.44+ и внешние компоненты (текстовый энкодер Qwen3-VL 32B и VAE fp16).
Лицензия MiniMax-H3-Image Community License имеет территориальные ограничения (права предоставляются за пределами ЕС, Великобритании, Южной Кореи и США) и политику допустимого использования.
Примеры
Discuss 15 23K

Will it run?

Runs in FP8

Fits without quantisation.

  • FP8recommendedweights 20 GB · ready files23 GB
  • 4-bitweights 11 GB14 GB

Tip: go 8-bit.FP8 is within about a percent of full precision in quality, takes half the memory and runs faster on RTX 40/50 and H100. Full precision only pays off for fine-tuning.

What to get for this model

Massed ComputeOpen Massed Compute

Your own GPU: FP8 — from RTX 4090

Massed Compute hourly prices, November 2026. The discounted price applies with the coupon at checkout.

Estimate: weights plus working memory. Long videos, high resolutions and long contexts need more.

Run it on Massed Compute

A ready script for the machine we advise above: paste it and the model downloads and starts.

  1. 1. Rent RTX A6000

    $0.43 an hour with the coupon. Pick the Ubuntu image when you create the machine.

    Open Massed Compute
  2. 2. Paste the script into the machine's terminal

    Connect over SSH (the Massed Compute panel shows the command) or open a terminal on the machine's desktop.

    HF_TOKEN / CIVITAI_TOKENThe script starts with token lines: paste yours between the quotes. The Hugging Face token is for gated models, the Civitai one for Civitai models.

    #!/usr/bin/env bash
    # MiniMax-H3-Image-fp8-nvfp4
    set -e
    # NVIDIA driver: CUDA 13 needs 580+. If older or missing, the current nvidia-open is installed (keep yours: KEEP_DRIVER=1)
    DRV=$(nvidia-smi --query-gpu=driver_version --format=csv,noheader 2>/dev/null | head -1 | cut -d. -f1)
    case "$DRV" in ""|*[!0-9]*) DRV=0 ;; esac
    if [ "$DRV" -lt 580 ] && [ -z "${KEEP_DRIVER:-}" ]; then
      . /etc/os-release && \
      curl -fsSLO "https://developer.download.nvidia.com/compute/cuda/repos/ubuntu${VERSION_ID//./}/x86_64/cuda-keyring_1.1-1_all.deb" && \
      sudo dpkg -i cuda-keyring_1.1-1_all.deb && rm -f cuda-keyring_1.1-1_all.deb && \
      sudo apt-get update && \
      sudo DEBIAN_FRONTEND=noninteractive apt-get install -y nvidia-open || \
      { echo "Could not install the NVIDIA driver: see the error above. To keep the current one, run with KEEP_DRIVER=1."; exit 1; }
      echo "NVIDIA driver updated. Reboot the machine (sudo reboot) and run this same script again."
      exit 0
    fi
    curl -LsSf https://astral.sh/uv/install.sh | sh
    source "$HOME/.local/bin/env"
    # CUDA 13+ → int8_convrot (Comfy-Org's advice), else fp8_scaled
    CU=$(nvidia-smi | grep -oP 'CUDA Version: \K[0-9]+' || echo 12)
    [ "$CU" -ge 13 ] && TORCH=cu130 || TORCH=cu128
    [ -d ~/ComfyUI ] || git clone https://github.com/comfyanonymous/ComfyUI ~/ComfyUI
    cd ~/ComfyUI
    uv venv --python 3.12 --allow-existing && source .venv/bin/activate
    uv pip install torch torchvision torchaudio --index-url https://download.pytorch.org/whl/$TORCH
    uv pip install -r requirements.txt "huggingface_hub[cli]"
    # Base files: MiniMax H3, 8-bit
    if [ "$CU" -ge 13 ]; then
      hf download Comfy-Org/MiniMax-H3 text_encoders/qwen3vl_32b_minimax_h3_int8_convrot.safetensors vae/minimax_h3_video_vae_fp16.safetensors vae/minimax_h3_audio_vae_fp32.safetensors --local-dir models
    else
      hf download Comfy-Org/MiniMax-H3 text_encoders/qwen3vl_32b_minimax_h3_nvfp4_awq.safetensors vae/minimax_h3_video_vae_fp16.safetensors vae/minimax_h3_audio_vae_fp32.safetensors --local-dir models
    fi
    # Main model: MiniMax-H3-Image-fp8-nvfp4
    hf download LSDJesus/MiniMax-H3-Image-fp8-nvfp4 minimax_h3_image_pruned_fp8_scaled.safetensors --local-dir models/diffusion_models
    # Start ComfyUI. From your computer: ssh -L 8188:localhost:8188 user@IP, then http://localhost:8188
    python main.py --listen 127.0.0.1 --port 8188
  3. 3. Use it

    From your computer: ssh -L 8188:localhost:8188 user@machine-IP, then open http://localhost:8188. Or open that address in the browser on the machine's desktop. The model's workflow is usually in its Hugging Face card.

Stop the machine in the panel when you are done: it bills by the minute while it runs.

How to speed it up

Picked for this model type. Choose your hardware above to see what fits you exactly.

  • SageAttention 3v2.2.0from October 28, 2025

    even faster on RTX 50 / Blackwell

    FP4 attention for Blackwell. Faster than SageAttention 2, but the authors suggest v2 when accuracy matters.

    How to enable: Build from the sageattention3_blackwell folder of the repo; in ComfyUI via KJNodes.

    Earlier generations (2)
    • SageAttention 2++ — Quantised (INT8/FP8) attention with no visible quality loss. The main speed-up for image and video generation.
    • SageAttention 1 — First version: INT8 for Q·K. Still works, but 2++ is faster and more accurate.
  • FlashAttention 44.0.0b40from November 18, 2026new release

    fastest exact attention on B200

    Kernels for Blackwell (beta). Exact attention without quantisation — fine for everything, LLMs included.

    How to enable: pip install flash-attn-4; vLLM and SGLang pick it up themselves.

    Earlier generations (3)
    • FlashAttention 3 — The Hopper (H100/H200) version with FP8.
    • FlashAttention 2 — The standard for RTX 30/40/50 and A100: exact attention without the memory cost of long contexts.
    • xFormers — The older way to speed up attention, works almost everywhere. Sage or Flash are faster where available.
  • cache-dit (DBCache)v1.5.6from November 20, 2026new release

    1.5–3× at nearly the same quality

    Reuses block outputs between diffusion steps. Supports most DiT models.

    How to enable: pip install cache-dit; one line cache_dit.enable_cache(pipe) for diffusers.

    Earlier generations (2)
    • MagCache — Skips steps by magnitude of change. More accurate than TeaCache, no calibration.
    • TeaCache — The first popular diffusion step cache. Works, newer methods are more accurate.
  • Nunchaku (SVDQuant 4-bit)v1.2.1from January 25, 2026

    ≈3× faster and 3.5× less memory

    4-bit versions of popular image models with almost no quality loss (FP4 on RTX 50).

    How to enable: Ready weights for supported models; in ComfyUI use ComfyUI-nunchaku.

  • torch.compile2.15.0from October 28, 2026new release

    10–30% for free

    Compiles the model for your GPU. Slower first run, faster afterwards.

    How to enable: model = torch.compile(model); in ComfyUI the TorchCompileModel node.

MiniMax H3 prompts

All prompts

Ready prompts with the resulting video: copy and try.

Model family

  1. MiniMax-H3family root
  2. MiniMax-H3-Image
  3. MiniMax-H3-Image-fp8-nvfp4

New posts about versions of MiniMax-H3 (quants, finetunes, LoRAs) will show up under the bell.

Quantised versions 12All on Hugging Face
Fine-tunes 12All on Hugging Face
LoRAs and adapters 12All on Hugging Face
Merges 3All on Hugging Face

About the model

LSDJesus/MiniMax-H3-Image-fp8-nvfp4
Author
LSDJesus
Category
Images
Released
Posted

On NeyroLearn

Hugging Face

23K15

Ask AI about this model

Answered by Gemini 4 · the chat is kept only in this tab

Comments