Skip to content
Robotics

PI0.5 YAM Gello Red Cap

адаптация робота без градиентного обучения

2 min readupdated

Исследовательский чекпоинт модели PI05 (4.14 млрд параметров) от автора npow, настроенный под задачу манипуляции с красным колпачком на роботе YAM через стандартный API библиотеки LeRobot. На вход модель принимает текущее состояние 14 суставов и кадры с трёх RGB-камер, а на выходе генерирует последовательность из 50 целевых положений для манипуляторов и схватов. Вместо классического дообучения здесь применён метод weight-space programming (программное редактирование тензоров весов): часть весов зрения и нормализации перенесли из чекпоинта RoboCasa, масштабировали проекции экспертов и скорректировали эмбеддинги слов. Такой подход позволяет адаптировать базовую lerobot/pi05_base без затрат на градиентный спуск и пригодится исследователям робототехники и VLA-моделей.

Ключевые особенности

  • Полные объединённые веса PI05 в формате safetensors, совместимые со стандартным инференсом LeRobot (10 шагов flow-генерации).
  • Нулевое градиентное обучение: адаптация выполнена статической программой редактирования тензоров с использованием статистики демонстраций YAM.
  • Ошибка предсказания первых 10 действий снижена на 83,7% по сравнению с базовой pi05_base на 20 тестовых эпизодах.
  • Прилагаются JSON-отчёты с проверкой воспроизводимости весов (export_verification.json) и полной программой их правки.

Что можно сделать

  • Загрузить политику в среду LeRobot 0.4.4 для офлайн-оценки предсказания траекторий захвата красного колпачка и укладки его на чёрную коробку.
  • Использовать опубликованный файл weight_edit_program.json как шаблон для переноса весов между чекпоинтами PI05 под другие задачи манипуляции без файнтюнинга.

Пример

import torch
from lerobot.policies.pi05 import PI05Policy
from lerobot.policies.factory import make_pre_post_processors

repo = "npow/pi05-yam-gello-red-cap-wsp-standard-v1"
policy = PI05Policy.from_pretrained(repo).to("cuda").eval()
preprocess, postprocess = make_pre_post_processors(
    policy_cfg=policy.config, pretrained_path=repo,
)
ПодробнееМетрики (офлайн, 20 эпизодов): ошибка первых 10 шагов — 0.03414 (против 0.20908 у базы), ошибка всех 50 шагов — 0.19975 (против 0.45768 у базы), сбалансированная точность схвата — 92,91%.
Ограничения: модель проверена только офлайн; успешность выполнения задачи в симуляторе и на реальном роботе YAM не подтверждена.
Совместимость: протестировано на LeRobot 0.4.4; для бэкенда OpenPI потребуется конвертация в формат Orbax.
Лицензия: производная от Gemma (lerobot/pi05_base) и Apache-2.0 (донор pi05-robocasa-H50).
Discuss Telegram 0 43

Will it run?

Runs in F32

Fits without quantisation.

  • F32weights 15 GB · ready files17 GB
  • BF16weights 7.7 GB9.0 GB
  • FP8 / INT8recommendedweights 3.9 GB4.7 GB
  • 4-bitweights 2.2 GB2.9 GB

Tip: go 8-bit.FP8 / INT8 is within about a percent of full precision in quality, takes half the memory and runs faster on RTX 40/50 and H100. Full precision only pays off for fine-tuning.

What to get for this model

Massed ComputeOpen Massed Compute

Your own GPU: FP8 / INT8 — from RTX 2060 · F32 — from RTX 4090

Massed Compute hourly prices, November 2026. The discounted price applies with the coupon at checkout.

Estimate: weights plus working memory. Long videos, high resolutions and long contexts need more.

Run it on Massed Compute

The script downloads the model to the rented machine. How to run it is in the model card.

  1. 1. Rent a machine with a fitting GPU

    Open Massed Compute
  2. 2. Paste the script into the machine's terminal

    Connect over SSH (the Massed Compute panel shows the command) or open a terminal on the machine's desktop.

    HF_TOKEN / CIVITAI_TOKENThe script starts with token lines: paste yours between the quotes. The Hugging Face token is for gated models, the Civitai one for Civitai models.

    # npow/pi05-yam-gello-red-cap-wsp-standard-v1
    mkdir -p ~/models
    curl -LsSf https://astral.sh/uv/install.sh | sh
    source "$HOME/.local/bin/env"
    uv tool install "huggingface_hub[cli]"
    hf download npow/pi05-yam-gello-red-cap-wsp-standard-v1 --local-dir ~/models/pi05-yam-gello-red-cap-wsp-standard-v1
    # The model is in ~/models. How to run it is in the model card (link above).
  3. 3. Use it

    The model is in ~/models. How to run it is in the model card (link above).

Stop the machine in the panel when you are done: it bills by the minute while it runs.

How to speed it up

Picked for this model type. Choose your hardware above to see what fits you exactly.

  • FlashAttention 44.0.0b40from November 18, 2026new release

    fastest exact attention on B200

    Kernels for Blackwell (beta). Exact attention without quantisation — fine for everything, LLMs included.

    How to enable: pip install flash-attn-4; vLLM and SGLang pick it up themselves.

    Earlier generations (2)
    • FlashAttention 3 — The Hopper (H100/H200) version with FP8.
    • FlashAttention 2 — The standard for RTX 30/40/50 and A100: exact attention without the memory cost of long contexts.
  • torch.compile2.15.0from October 28, 2026new release

    10–30% for free

    Compiles the model for your GPU. Slower first run, faster afterwards.

    How to enable: model = torch.compile(model); in ComfyUI the TorchCompileModel node.

Model family

  1. paligemma-3b-pt-224family root
  2. pi05_base
  3. pi05-yam-gello-red-cap-wsp-standard-v1

New posts about versions of paligemma-3b-pt-224 (quants, finetunes, LoRAs) will show up under the bell.

Fine-tunes 12All on Hugging Face
LoRAs and adapters 12All on Hugging Face

About the model

npow/pi05-yam-gello-red-cap-wsp-standard-v1
Author
npow
Category
Robotics
Released
Posted

On NeyroLearn

Hugging Face

430

Ask AI about this model

Answered by Gemini 4 · the chat is kept only in this tab

Comments