Skip to content
Robotics

pi05_cube2cross_v2_all_trtc_s1

политика для управления роботом UR5e

2 min readupdated

Модель представляет собой обученную политику (алгоритм управления действиями робота) для манипулятора ur5e_hand_e, которая берет разноцветные кубики и ставит их на красный крест по текстовой команде. В основе лежит π₀.₅ (lerobot/pi05_base, 4.14B параметров) — VLA-модель (Vision-Language-Action, нейросеть, объединяющая зрение, язык и моторные действия) от Physical Intelligence, адаптированная под фреймворк LeRobot. На вход система получает текущее состояние робота и изображения с двух камер, а на выходе генерирует вектор из 10 координат для следующего действия. Разработка пригодится инженерам-робототехникам и исследователям для экспериментов с визуально-языковым управлением и дообучения собственных сценариев манипуляции.

Ключевые особенности

  • Мультимодальный вход: анализирует вектор состояния робота (10,) и видеопоток 640×480 с двух камер (top и wrist).
  • Управление по тексту: поддерживает четыре команды для выбора нужного объекта — синего, зеленого, желтого или красного кубика.
  • База π₀.₅: построена на архитектуре от Physical Intelligence, созданной для обобщения навыков в новых условиях.
  • Интеграция с LeRobot: готова к запуску через стандартную утилиту lerobot-rollout версии 0.6.2.

Что можно сделать

  • Запустить готовую политику на реальном манипуляторе ur5e_hand_e с двумя камерами для сортировки и переноса цветных кубиков по текстовым инструкциям.
  • Использовать веса и конфигурацию как отправную точку для дообучения на собственном датасете в LeRobot под похожие задачи захвата и перемещения предметов.

Пример

lerobot-rollout \
  --strategy.type=base \
  --robot.type=ur5e_hand_e \
  --robot.port= \
  --robot.cameras="{ top: {type: opencv, index_or_path: , width: 640, height: 480, fps: 30}, wrist: {type: opencv, index_or_path: , width: 640, height: 480, fps: 30}}" \
  --policy.path=felsager/pi05_cube2cross_v2_all_trtc_s1 \
  --task="pick up the blue cube and place it on the red cross."
ПодробнееОбучена на датасете felsager/vla_cubes_cross_v2: 1000 эпизодов, 493 474 кадра при 30 FPS.
Параметры обучения: 30 000 шагов, batch size 16, оптимизатор AdamW, learning rate 5e-05, seed 1.
Результаты оценки точности на реальном роботе автором пока не опубликованы.
Discuss Telegram 0 23

Will it run?

Runs in F32

Fits without quantisation.

  • F32weights 15 GB · ready files17 GB
  • BF16weights 7.7 GB9.0 GB
  • FP8 / INT8recommendedweights 3.9 GB4.7 GB
  • 4-bitweights 2.2 GB2.9 GB

Tip: go 8-bit.FP8 / INT8 is within about a percent of full precision in quality, takes half the memory and runs faster on RTX 40/50 and H100. Full precision only pays off for fine-tuning.

What to get for this model

Massed ComputeOpen Massed Compute

Your own GPU: FP8 / INT8 — from RTX 2060 · F32 — from RTX 4090

Massed Compute hourly prices, November 2026. The discounted price applies with the coupon at checkout.

Estimate: weights plus working memory. Long videos, high resolutions and long contexts need more.

Run it on Massed Compute

The script downloads the model to the rented machine. How to run it is in the model card.

  1. 1. Rent a machine with a fitting GPU

    Open Massed Compute
  2. 2. Paste the script into the machine's terminal

    Connect over SSH (the Massed Compute panel shows the command) or open a terminal on the machine's desktop.

    HF_TOKEN / CIVITAI_TOKENThe script starts with token lines: paste yours between the quotes. The Hugging Face token is for gated models, the Civitai one for Civitai models.

    # felsager/pi05_cube2cross_v2_all_trtc_s1
    mkdir -p ~/models
    curl -LsSf https://astral.sh/uv/install.sh | sh
    source "$HOME/.local/bin/env"
    uv tool install "huggingface_hub[cli]"
    hf download felsager/pi05_cube2cross_v2_all_trtc_s1 --local-dir ~/models/pi05_cube2cross_v2_all_trtc_s1
    # The model is in ~/models. How to run it is in the model card (link above).
  3. 3. Use it

    The model is in ~/models. How to run it is in the model card (link above).

Stop the machine in the panel when you are done: it bills by the minute while it runs.

How to speed it up

Picked for this model type. Choose your hardware above to see what fits you exactly.

  • FlashAttention 44.0.0b40from November 18, 2026new release

    fastest exact attention on B200

    Kernels for Blackwell (beta). Exact attention without quantisation — fine for everything, LLMs included.

    How to enable: pip install flash-attn-4; vLLM and SGLang pick it up themselves.

    Earlier generations (2)
    • FlashAttention 3 — The Hopper (H100/H200) version with FP8.
    • FlashAttention 2 — The standard for RTX 30/40/50 and A100: exact attention without the memory cost of long contexts.
  • torch.compile2.15.0from October 28, 2026new release

    10–30% for free

    Compiles the model for your GPU. Slower first run, faster afterwards.

    How to enable: model = torch.compile(model); in ComfyUI the TorchCompileModel node.

Model family

  1. paligemma-3b-pt-224family root
  2. pi05_base
  3. pi05_cube2cross_v2_all_trtc_s1

New posts about versions of paligemma-3b-pt-224 (quants, finetunes, LoRAs) will show up under the bell.

Fine-tunes 12All on Hugging Face
LoRAs and adapters 12All on Hugging Face

About the model

felsager/pi05_cube2cross_v2_all_trtc_s1
Author
felsager
Category
Robotics
Released
Posted

On NeyroLearn

Hugging Face

230

Ask AI about this model

Answered by Gemini 4 · the chat is kept only in this tab

Comments