Skip to content
Video

MiniMax-H3 360° Orbit LoRA

замороженный мир и полный облёт

2 min read

LoRA от robertbschuette (Pablo Dawson) для MiniMax-H3 FL2VA. Превращает одно фото в 360° орбиту камеры с замороженной сценой и возвратом в стартовый кадр: одно и то же изображение подаётся как первый и последний keyframe.

Ключевые особенности

  • Учит геометрии орбиты: базовая FL2VA с одинаковыми keyframe почти не двигается, а без LoRA камера уплывает и не возвращается.
  • Клип замыкается на первом кадре, поэтому орбиты можно склеивать без видимого шва.
  • Движется только камера: люди, объекты, лица, руки, одежда и жидкости остаются на месте.
  • Настройки: 768×768, 73 кадра (~3 с при 24 fps), 28 steps, LoRA strength 1.0, audio off; guidance нет.

Пример

Промпт из карточки — дословно:
One frozen instant. Only the camera moves. In a continuous 360 orbit. Preserve every person and object in exactly the same world position, orientation, shape and pose throughout the shot. Airborne objects remain suspended at the captured height and angle: no wobbling, shaking, spinning, drifting, falling or continued action. Keep faces, hands, clothing, liquids and the background motionless while retaining their natural appearance. Camera parallax is the only source of apparent movement. No cuts, zoom, morphing or added objects.

ПодробнееЧисленных бенчмарков нет — только визуальные сравнения; инференс: MiniMax-H3 FL2VA pruned int8 ConvRot, 768×768, 73 кадра, 28 steps, CFG и negative prompt не нужны.
Обучение: 28 orbit-рендеров человеческих Gaussian splats, rank 16, alpha 16, 3000 шагов, 1×A100 80 GB, 10 ч 24 мин.
Ограничения: узкий домен — 28 человеко-центричных квадратных клипов по 73 кадра; другие субъекты, aspect ratio и длина не тестировались, возможны лёгкие движения и моргания.
Примеры и видео
Discuss Telegram 0 10

Will it run?

Runs in 4-bit

Full precision does not fit, a quantised version does: quality barely changes down to 8 bits, more noticeably at 4 bits.

  • BF16weights 62 GB · ready files74 GB
  • FP8 / INT8recommendedweights 31 GB39 GB
  • 4-bitweights 17 GB23 GB

Tip: go 8-bit.FP8 / INT8 is within about a percent of full precision in quality, takes half the memory and runs faster on RTX 40/50 and H100. Full precision only pays off for fine-tuning.

This is a LoRA: counted together with its base model MiniMax-H3.

Estimate: weights plus working memory. Long videos, high resolutions and long contexts need more.

Run it on Massed Compute

A ready script for the machine we advise above: paste it and the model downloads and starts.

  1. 1. Rent RTX A6000

    $0.43 an hour with the coupon. Pick the Ubuntu image when you create the machine.

    Open Massed Compute
  2. 2. Paste the script into the machine's terminal

    Connect over SSH (the Massed Compute panel shows the command) or open a terminal on the machine's desktop.

    HF_TOKEN / CIVITAI_TOKENThe script starts with token lines: paste yours between the quotes. The Hugging Face token is for gated models, the Civitai one for Civitai models.

    #!/usr/bin/env bash
    # MiniMax-H3-360-Orbit-LoRA
    set -e
    # NVIDIA driver: CUDA 13 needs 580+. If older or missing, the current nvidia-open is installed (keep yours: KEEP_DRIVER=1)
    DRV=$(nvidia-smi --query-gpu=driver_version --format=csv,noheader 2>/dev/null | head -1 | cut -d. -f1)
    case "$DRV" in ""|*[!0-9]*) DRV=0 ;; esac
    if [ "$DRV" -lt 580 ] && [ -z "${KEEP_DRIVER:-}" ]; then
      . /etc/os-release && \
      curl -fsSLO "https://developer.download.nvidia.com/compute/cuda/repos/ubuntu${VERSION_ID//./}/x86_64/cuda-keyring_1.1-1_all.deb" && \
      sudo dpkg -i cuda-keyring_1.1-1_all.deb && rm -f cuda-keyring_1.1-1_all.deb && \
      sudo apt-get update && \
      sudo DEBIAN_FRONTEND=noninteractive apt-get install -y nvidia-open || \
      { echo "Could not install the NVIDIA driver: see the error above. To keep the current one, run with KEEP_DRIVER=1."; exit 1; }
      echo "NVIDIA driver updated. Reboot the machine (sudo reboot) and run this same script again."
      exit 0
    fi
    curl -LsSf https://astral.sh/uv/install.sh | sh
    source "$HOME/.local/bin/env"
    # CUDA 13+ → int8_convrot (Comfy-Org's advice), else fp8_scaled
    CU=$(nvidia-smi | grep -oP 'CUDA Version: \K[0-9]+' || echo 12)
    [ "$CU" -ge 13 ] && TORCH=cu130 || TORCH=cu128
    [ -d ~/ComfyUI ] || git clone https://github.com/comfyanonymous/ComfyUI ~/ComfyUI
    cd ~/ComfyUI
    uv venv --python 3.12 --allow-existing && source .venv/bin/activate
    uv pip install torch torchvision torchaudio --index-url https://download.pytorch.org/whl/$TORCH
    uv pip install -r requirements.txt "huggingface_hub[cli]"
    # Base files: MiniMax H3, 8-bit
    if [ "$CU" -ge 13 ]; then
      hf download Comfy-Org/MiniMax-H3 diffusion_models/minimax_h3_fl2va_int8_convrot.safetensors text_encoders/qwen3vl_32b_minimax_h3_int8_convrot.safetensors vae/minimax_h3_video_vae_fp16.safetensors vae/minimax_h3_audio_vae_fp32.safetensors --local-dir models
    else
      hf download Comfy-Org/MiniMax-H3 diffusion_models/minimax_h3_fl2va_pruned_fp8_scaled.safetensors text_encoders/qwen3vl_32b_minimax_h3_nvfp4_awq.safetensors vae/minimax_h3_video_vae_fp16.safetensors vae/minimax_h3_audio_vae_fp32.safetensors --local-dir models
    fi
    # LoRAs (1)
    hf download robertbschuette/MiniMax-H3-360-Orbit-LoRA minimax_h3_flf2v_lora_v1.safetensors --local-dir models/loras/robertbschuette__MiniMax-H3-360-Orbit-LoRA
    # Start ComfyUI. From your computer: ssh -L 8188:localhost:8188 user@IP, then http://localhost:8188
    python main.py --listen 127.0.0.1 --port 8188
    Add more LoRAs to MiniMax-H3
  3. 3. Use it

    From your computer: ssh -L 8188:localhost:8188 user@machine-IP, then open http://localhost:8188. Or open that address in the browser on the machine's desktop. The model's workflow is usually in its Hugging Face card.

Stop the machine in the panel when you are done: it bills by the minute while it runs.

How to speed it up

Picked for this model type. Choose your hardware above to see what fits you exactly.

  • SageAttention 3v2.2.0from October 28, 2025

    even faster on RTX 50 / Blackwell

    FP4 attention for Blackwell. Faster than SageAttention 2, but the authors suggest v2 when accuracy matters.

    How to enable: Build from the sageattention3_blackwell folder of the repo; in ComfyUI via KJNodes.

    Earlier generations (2)
    • SageAttention 2++ — Quantised (INT8/FP8) attention with no visible quality loss. The main speed-up for image and video generation.
    • SageAttention 1 — First version: INT8 for Q·K. Still works, but 2++ is faster and more accurate.
  • FlashAttention 44.0.0b40from November 18, 2026new release

    fastest exact attention on B200

    Kernels for Blackwell (beta). Exact attention without quantisation — fine for everything, LLMs included.

    How to enable: pip install flash-attn-4; vLLM and SGLang pick it up themselves.

    Earlier generations (3)
    • FlashAttention 3 — The Hopper (H100/H200) version with FP8.
    • FlashAttention 2 — The standard for RTX 30/40/50 and A100: exact attention without the memory cost of long contexts.
    • xFormers — The older way to speed up attention, works almost everywhere. Sage or Flash are faster where available.
  • cache-dit (DBCache)v1.5.6from November 20, 2026new release

    1.5–3× at nearly the same quality

    Reuses block outputs between diffusion steps. Supports most DiT models.

    How to enable: pip install cache-dit; one line cache_dit.enable_cache(pipe) for diffusers.

    Earlier generations (2)
    • MagCache — Skips steps by magnitude of change. More accurate than TeaCache, no calibration.
    • TeaCache — The first popular diffusion step cache. Works, newer methods are more accurate.
  • LightX2V step distill0.6.1from November 9, 2026new release

    5–10× fewer steps

    Distilled LoRAs and an engine: video in 4–8 steps instead of 30–50.

    How to enable: Load their step-distill LoRA, CFG 1.0, 4–8 steps.

  • torch.compile2.15.0from October 28, 2026new release

    10–30% for free

    Compiles the model for your GPU. Slower first run, faster afterwards.

    How to enable: model = torch.compile(model); in ComfyUI the TorchCompileModel node.

MiniMax H3 prompts

All prompts

Ready prompts with the resulting video: copy and try.

Model family

Requires the base model

MiniMaxAI/MiniMax-H3

This model is a LoRA / adapter. Download the base model first, then load this one on top.

New posts about versions of MiniMax-H3 (quants, finetunes, LoRAs) will show up under the bell.

Quantised versions 12All on Hugging Face
Fine-tunes 12All on Hugging Face
LoRAs and adapters 12All on Hugging Face
Merges 3All on Hugging Face

About the model

robertbschuette/MiniMax-H3-360-Orbit-LoRA
Author
robertbschuette
Category
Video
Released
Posted

On NeyroLearn

Hugging Face

100

Ask AI about this model

Answered by Gemini 4 · the chat is kept only in this tab

Comments