Skip to content
Robotics

ACT v2 (duplo-act-v2)

модель для захвата кубиков Duplo манипулятором SO-101

2 min readupdated

Модель представляет собой политику управления роботом на базе архитектуры ACT (Action Chunking Transformer — трансформер, предсказывающий сразу последовательность будущих действий). Она обучена брать кубик Duplo из миски и подносить его к инспекционной камере для проверки. Решение создано автором IaroslavBashko на хакатоне Junction 2026 в рамках челленджа Intel Physical AI и экспортировано в формат OpenVINO IR для быстрого локального запуска. В отличие от универсальных моделей, эта версия строго заточена под конкретную аппаратную сборку с тремя камерами и манипулятором SO-101. Пригодится разработчикам в сфере робототехники, которые работают со стендами Intel Physical AI Studio.

Ключевые особенности

  • Компактный размер: около 34M параметров (137 МБ в точности FP32) в файлах act.xml и act.bin.
  • Мультимодальный вход: принимает текущие углы 6 суставов робота и RGB-потоки сразу с трёх камер (top, wrist, inspect).
  • Генерация траектории наперёд: за один проход выдаёт 100 шагов целевых позиций для 6 приводов, чего хватает на 3.3 секунды работы при частоте 30 Гц.
  • Высокая скорость инференса: расчёт одного плана на 100 шагов занимает всего 12 мс на встроенной графике ноутбука с Intel Core Ultra X9 388H.

Что можно сделать

  • Встроить в ячейку визуального контроля (Duplo Inspection Cell) для автоматической подачи деталей под инспекционную камеру.
  • Использовать как готовый референс и шаблон для запуска политик из Intel Physical AI Studio через библиотеку physicalai.inference на CPU или встроенном GPU.

Пример

from physicalai.inference import InferenceModel

model = InferenceModel("openvino", device="GPU")  # или "CPU"
chunk = model.predict_action_chunk({
    "state": state, "images.top": top,
    "images.wrist": wrist, "images.inspect": inspect
})
ПодробнееОбучение: 154 эпизода телеуправления (51 999 кадров, 30 fps), 10 эпох с батчем 64 на GPU Modal A10G (2 ч 22 мин); финальный loss — 0.134 (train) и 0.324 (validation).
Тесты на реальном роботе: 4 из 4 успешных захватов, каждый цикл занимал от 9.9 до 12.0 секунд.
Ограничения: работает только в идентичной конфигурации с таким же расположением камер, мисок и калибровкой SO-101.
Discuss Telegram 0

Will it run?

Runs in BF16

Fits without quantisation.

  • BF16weights 0.1 GB · ready files0.6 GB
  • FP8 / INT8recommendedweights 0.1 GB0.6 GB
  • 4-bitweights 0.0 GB0.5 GB

Tip: go 8-bit.FP8 / INT8 is within about a percent of full precision in quality, takes half the memory and runs faster on RTX 40/50 and H100. Full precision only pays off for fine-tuning.

What to get for this model

Massed ComputeOpen Massed Compute

Your own GPU: FP8 / INT8 — from RTX 2060 · BF16 — from RTX 2060

Massed Compute hourly prices, November 2026. The discounted price applies with the coupon at checkout.

Estimate: weights plus working memory. Long videos, high resolutions and long contexts need more.

Run it on Massed Compute

The script downloads the model to the rented machine. How to run it is in the model card.

  1. 1. Rent a machine with a fitting GPU

    Open Massed Compute
  2. 2. Paste the script into the machine's terminal

    Connect over SSH (the Massed Compute panel shows the command) or open a terminal on the machine's desktop.

    HF_TOKEN / CIVITAI_TOKENThe script starts with token lines: paste yours between the quotes. The Hugging Face token is for gated models, the Civitai one for Civitai models.

    # IaroslavBashko/duplo-act-v2
    mkdir -p ~/models
    curl -LsSf https://astral.sh/uv/install.sh | sh
    source "$HOME/.local/bin/env"
    uv tool install "huggingface_hub[cli]"
    hf download IaroslavBashko/duplo-act-v2 --local-dir ~/models/duplo-act-v2
    # The model is in ~/models. How to run it is in the model card (link above).
    Add more LoRAs to duplo-act-v2
  3. 3. Use it

    The model is in ~/models. How to run it is in the model card (link above).

Stop the machine in the panel when you are done: it bills by the minute while it runs.

How to speed it up

Picked for this model type. Choose your hardware above to see what fits you exactly.

  • FlashAttention 44.0.0b40from November 18, 2026new release

    fastest exact attention on B200

    Kernels for Blackwell (beta). Exact attention without quantisation — fine for everything, LLMs included.

    How to enable: pip install flash-attn-4; vLLM and SGLang pick it up themselves.

    Earlier generations (2)
    • FlashAttention 3 — The Hopper (H100/H200) version with FP8.
    • FlashAttention 2 — The standard for RTX 30/40/50 and A100: exact attention without the memory cost of long contexts.
  • torch.compile2.15.0from October 28, 2026new release

    10–30% for free

    Compiles the model for your GPU. Slower first run, faster afterwards.

    How to enable: model = torch.compile(model); in ComfyUI the TorchCompileModel node.

Model family

New posts about versions of duplo-act-v2 (quants, finetunes, LoRAs) will show up under the bell.

No known relatives of this model yet. All derivatives on Hugging Face

About the model

IaroslavBashko/duplo-act-v2
Author
IaroslavBashko
Category
Robotics
Released
Posted

On NeyroLearn

Hugging Face

00

Ask AI about this model

Answered by Gemini 4 · the chat is kept only in this tab

Comments