Skip to content
Robotics

smolvla_rebot_sort_v1

нейросеть для сортировки ключей роботом

2 min readupdated

Компактная VLA-модель (Vision-Language-Action — нейросеть, объединяющая зрение, понимание текста и управление действиями) для робототехники, обученная на базе lerobot/smolvla_base (0,45 млрд параметров) в экосистеме LeRobot. Она принимает изображения с трёх камер и текущее состояние суставов манипулятора rebot_b601_follower, а на выходе генерирует команды для выполнения конкретной физической задачи — поднятия ключей и их перемещения в нужный контейнер. В отличие от тяжеловесных моделей, архитектура SmolVLA рассчитана на запуск на обычном потребительском железе без ущерба для эффективности. Пригодится разработчикам и энтузиастам робототехники, работающим с платформой LeRobot и совместимыми манипуляторами.

Ключевые особенности

  • Работает с тремя видеопотоками (front_wide, gripper, high_oblique) в разрешении 256×256 пикселей и вектором состояния из 6 параметров.
  • Генерирует 7-мерный вектор действий для точного управления звеньями и захватом робота.
  • Базируется на компактной архитектуре SmolVLA, оптимизированной для локального развёртывания на пользовательских видеокартах.
  • Дообучена на датасете RoboCrafty/rebot_sort_v1, состоящем из 35 эпизодов (19 177 кадров при 30 FPS).

Что можно сделать

  • Запустить готовую политику на роботе rebot_b601_follower для автоматического захвата ключей и их сортировки в заданную корзину.
  • Использовать чекпоинт как отправную точку для дальнейшего дообучения под схожие задачи захвата и перекладывания мелких предметов в среде LeRobot.

Пример

lerobot-rollout \
  --strategy.type=base \
  --robot.type=rebot_b601_follower \
  --robot.port= \
  --policy.path=niru-5/smolvla_rebot_sort_v1_2026-11-15_02-15-27 \
  --task="pickup the keys and put it in the designated bin" \
  --duration=60
ПодробнееОбучение: 10 000 шагов, batch size 128, оптимизатор AdamW, learning rate 0.0001, LeRobot 0.7.1.
Оценка: результаты тестирования на реальном роботе в карточке пока не приведены.
Лицензия: Apache-2.0.
Discuss Telegram 0

Will it run?

Runs in BF16

Fits without quantisation.

  • BF16weights 0.8 GB · ready files1.4 GB
  • FP8 / INT8recommendedweights 0.4 GB1.0 GB
  • 4-bitweights 0.2 GB0.8 GB

Tip: go 8-bit.FP8 / INT8 is within about a percent of full precision in quality, takes half the memory and runs faster on RTX 40/50 and H100. Full precision only pays off for fine-tuning.

What to get for this model

Massed ComputeOpen Massed Compute

Your own GPU: FP8 / INT8 — from RTX 2060 · BF16 — from RTX 2060

Massed Compute hourly prices, November 2026. The discounted price applies with the coupon at checkout.

Estimate: weights plus working memory. Long videos, high resolutions and long contexts need more.

Run it on Massed Compute

The script downloads the model to the rented machine. How to run it is in the model card.

  1. 1. Rent a machine with a fitting GPU

    Open Massed Compute
  2. 2. Paste the script into the machine's terminal

    Connect over SSH (the Massed Compute panel shows the command) or open a terminal on the machine's desktop.

    HF_TOKEN / CIVITAI_TOKENThe script starts with token lines: paste yours between the quotes. The Hugging Face token is for gated models, the Civitai one for Civitai models.

    # niru-5/smolvla_rebot_sort_v1_2026-11-15_02-15-27
    mkdir -p ~/models
    curl -LsSf https://astral.sh/uv/install.sh | sh
    source "$HOME/.local/bin/env"
    uv tool install "huggingface_hub[cli]"
    hf download niru-5/smolvla_rebot_sort_v1_2026-11-15_02-15-27 --local-dir ~/models/smolvla_rebot_sort_v1_2026-11-15_02-15-27
    # The model is in ~/models. How to run it is in the model card (link above).
  3. 3. Use it

    The model is in ~/models. How to run it is in the model card (link above).

Stop the machine in the panel when you are done: it bills by the minute while it runs.

How to speed it up

Picked for this model type. Choose your hardware above to see what fits you exactly.

  • FlashAttention 44.0.0b40from November 18, 2026new release

    fastest exact attention on B200

    Kernels for Blackwell (beta). Exact attention without quantisation — fine for everything, LLMs included.

    How to enable: pip install flash-attn-4; vLLM and SGLang pick it up themselves.

    Earlier generations (2)
    • FlashAttention 3 — The Hopper (H100/H200) version with FP8.
    • FlashAttention 2 — The standard for RTX 30/40/50 and A100: exact attention without the memory cost of long contexts.
  • torch.compile2.15.0from October 28, 2026new release

    10–30% for free

    Compiles the model for your GPU. Slower first run, faster afterwards.

    How to enable: model = torch.compile(model); in ComfyUI the TorchCompileModel node.

Model family

  1. SmolLM2-360Mfamily root
  2. SmolLM2-360M-Instruct
  3. SmolVLM-500M-Instruct
  4. SmolVLM2-500M-Video-Instruct
  5. smolvla_base
  6. smolvla_rebot_sort_v1_2026-11-15_02-15-27

New posts about versions of SmolLM2-360M (quants, finetunes, LoRAs) will show up under the bell.

Quantised versions 12All on Hugging Face
Fine-tunes 12All on Hugging Face
LoRAs and adapters 8All on Hugging Face
Merges 1All on Hugging Face

About the model

niru-5/smolvla_rebot_sort_v1_2026-11-15_02-15-27
Author
niru-5
Category
Robotics
Released
Posted

On NeyroLearn

Hugging Face

00

Ask AI about this model

Answered by Gemini 4 · the chat is kept only in this tab

Comments