Skip to content
Other

Point-SAM Wytham LoRA

сегментация отдельных деревьев в LiDAR-сканах

2 min readupdated

Это исследовательский чекпоинт Point-SAM (ViT-L, 311,8 млн параметров), дообученный в Georgia Tech находить отдельные деревья в наземных лазерных сканах. Вы даёте модели точку-«клик» на стволе, а она возвращает точки облака, которые относит к этому дереву. От базовой yuchen0187/Point-SAM модель отличается LoRA-адаптерами и обученными частями энкодеров и декодера — всего дообучено 5,8 млн параметров. На тестовой полосе Wytham она заметно лучше исходных весов, но пока не готова работать как автоматический сегментатор: rule-based TreeX на этом лесу всё ещё точнее. Пригодится исследователям LiDAR, лесной экологии и тем, кто строит пайплайны учёта деревьев по 3D-сканам.

Ключевые особенности

  • LoRA rank 8, alpha 16 в query/value-проекциях attention; дополнительно обучены patch embedding, prompt encoder, mask encoder и mask decoder.
  • Адаптеры слиты с весами: файл загружается так же, как оригинальный Point-SAM.
  • Обучение на ISPRS Wytham: 431 дерево, 182 кропа по 12 м, по 10 000 точек без цвета; 3 000 шагов примерно за 33 прохода.
  • На test strip F1@IoU 0.5 вырос с 0.006/0.000 у оригинала до 0.181/0.185 в зависимости от способа кликов.
  • Маски ограничены: даже с идеальным кликом только 40% деревьев получают маску с перекрытием не меньше половины; частая ошибка — захват соседнего дерева.

Что можно сделать

  • Проверить пайплайн на своих наземных LiDAR-сканах: убрать землю, расставить клики, получить маски и слить их в ноутбуках проекта.
  • Дообучить чекпоинт под другой лес или сканер, если есть размеченные клики и маски деревьев.
  • Сравнить Point-SAM с TreeX и другими методами по F1/IoU на своих тайлах, чтобы понять, где нейросеть выигрывает.
  • Использовать как стартовую модель в исследовании promptable-сегментации 3D-облаков, а не как готовый продакшн-инструмент.

Пример

from huggingface_hub import hf_hub_download
from treeseg.models.point_sam import build_point_sam

path = hf_hub_download("haag-lidar/point-sam-wytham-lora", "model.safetensors")
model = build_point_sam(path, 512, 64).to("cuda").eval()
ПодробнееF1 на test strip: 0.181 со Stem-finder clicks и 0.185 с TreeX clicks; у оригинала — 0.006 и 0.000.
На val strip с идеальными кликами F1 0.44, а TreeX без модели — 0.66; маски часто перетекают на соседнее дерево.
Нужна NVIDIA GPU: Point-SAM зависит от CUDA-only библиотеки torkit3d. Обучение заняло около 20 минут на одной H100.
Проверено на одном лесу (Wytham Woods, UK) и одном сканере; мелкая структура ветвей не видна, цвет и интенсивность не используются.
Discuss Telegram 0

Will it run?

Runs in F32

Fits without quantisation.

  • F32weights 1.2 GB · ready files1.8 GB
  • BF16weights 0.6 GB1.1 GB
  • FP8 / INT8recommendedweights 0.3 GB0.8 GB
  • 4-bitweights 0.2 GB0.7 GB

Tip: go 8-bit.FP8 / INT8 is within about a percent of full precision in quality, takes half the memory and runs faster on RTX 40/50 and H100. Full precision only pays off for fine-tuning.

What to get for this model

Massed ComputeOpen Massed Compute

Your own GPU: FP8 / INT8 — from RTX 2060 · F32 — from RTX 2060

Massed Compute hourly prices, November 2026. The discounted price applies with the coupon at checkout.

Estimate: weights plus working memory. Long videos, high resolutions and long contexts need more.

Run it on Massed Compute

The script downloads the model to the rented machine. How to run it is in the model card.

  1. 1. Rent a machine with a fitting GPU

    Open Massed Compute
  2. 2. Paste the script into the machine's terminal

    Connect over SSH (the Massed Compute panel shows the command) or open a terminal on the machine's desktop.

    HF_TOKEN / CIVITAI_TOKENThe script starts with token lines: paste yours between the quotes. The Hugging Face token is for gated models, the Civitai one for Civitai models.

    # haag-lidar/point-sam-wytham-lora
    mkdir -p ~/models
    curl -LsSf https://astral.sh/uv/install.sh | sh
    source "$HOME/.local/bin/env"
    uv tool install "huggingface_hub[cli]"
    hf download haag-lidar/point-sam-wytham-lora --local-dir ~/models/point-sam-wytham-lora
    # The model is in ~/models. How to run it is in the model card (link above).
    Add more LoRAs to point-sam-wytham-lora
  3. 3. Use it

    The model is in ~/models. How to run it is in the model card (link above).

Stop the machine in the panel when you are done: it bills by the minute while it runs.

How to speed it up

Picked for this model type. Choose your hardware above to see what fits you exactly.

  • FlashAttention 44.0.0b40from November 18, 2026new release

    fastest exact attention on B200

    Kernels for Blackwell (beta). Exact attention without quantisation — fine for everything, LLMs included.

    How to enable: pip install flash-attn-4; vLLM and SGLang pick it up themselves.

    Earlier generations (2)
    • FlashAttention 3 — The Hopper (H100/H200) version with FP8.
    • FlashAttention 2 — The standard for RTX 30/40/50 and A100: exact attention without the memory cost of long contexts.
  • torch.compile2.15.0from October 28, 2026new release

    10–30% for free

    Compiles the model for your GPU. Slower first run, faster afterwards.

    How to enable: model = torch.compile(model); in ComfyUI the TorchCompileModel node.

Model family

New posts about versions of Point-SAM (quants, finetunes, LoRAs) will show up under the bell.

Fine-tunes 1All on Hugging Face

About the model

haag-lidar/point-sam-wytham-lora
Author
haag-lidar
Category
Other
Released
Posted

On NeyroLearn

Hugging Face

00

Ask AI about this model

Answered by Gemini 4 · the chat is kept only in this tab

Comments