Skip to content
Other

Qwen3.8-27B Luna LoRA

дистилляция агентных траекторий

2 min readupdated

Это LoRA (небольшая надстройка над базовой моделью) для текстовой Qwen/Qwen3.8-27B. Адаптер обучен на траекториях агента GPT-6 Luna Terminus-2 из набора OpenThoughts-Agent-SFT-3.16K — 3 134 строки, где в <think> лежит краткое рассуждение GPT-6 Luna или пусто. На выходе получаешь адаптер, который подключается к Qwen3.8-27B и позволяет экспериментировать с агентными сценариями на этих задачах. В релизе четыре папки по числу эпох: epoch-1, epoch-2, epoch-4 и epoch-6. Пригодится тем, кто занимается дистилляцией агентов и хочет сравнить разные стадии обучения.

Ключевые особенности

  • LoRA rank 128, alpha 256, dropout 0.05 на все linear-слои текстовой модели, включая проекции Gated DeltaNet; 0,93 млрд обучаемых параметров.
  • Дистилляция из траекторий GPT-6 Luna Terminus-2 на задачах OpenThoughts-Agent-SFT-3.16K (3 134 строки).
  • Средний training loss по эпохам: 0.681 / 0.566 / 0.404 / 0.227 / 0.085 / 0.027; к шестой эпохе тренировочный сет почти заучен.
  • 6 эпох, 1 176 шагов, effective batch 16, bf16, loss на каждом ответе ассистента, обрезка до 32 768 токенов.
  • Базовая Qwen3.8-27B содержит vision tower, но в этом адаптере он не используется — только текст.

Что можно сделать

  • Поднять адаптер через vLLM и прогнать агентные сценарии из OpenThoughts-Agent-SFT-3.16K.
  • Сравнить epoch-1/2/4/6: ранние эпохи меньше переобучены, поздние ближе к тренировочному сету.
  • Взять как отправную точку для собственной дистилляции агентных траекторий в Qwen3.8-27B.
  • Проверить в чат-боте или агенте с temperature 1.0 — это рекомендованная настройка из карточки.

Пример

vllm serve Qwen/Qwen3.8-27B --enable-lora --max-lora-rank 128 \
    --limit-mm-per-prompt '{"image":0,"video":0}' --reasoning-parser qwen3 \
    --lora-modules luna27-e6=<local path to epoch-6>
ПодробнееПик learning rate 3e-4, cosine decay после 3% warmup (35 шагов); обучение шло на 4 GPU с accumulation 4. Последовательности рендерились маркерами <|im_start|>/<|im_end|> вокруг текста хода, а не через chat template.
Оценки StrongREJECT, XSTest, CoCoNot, MASK и agentic misalignment ещё выполн��ются — результатов в карточке пока нет.
К шестой эпохе средний training loss 0.027: тренировочный сет близок к запоминанию, это стоит учитывать при выборе чекпоинта.
Discuss Telegram 0

Will it run?

Runs in 4-bit

Full precision does not fit, a quantised version does: quality barely changes down to 8 bits, more noticeably at 4 bits.

  • BF16weights 55 GB · ready files61 GB
  • FP8 / INT8recommendedweights 29 GB33 GB
  • 4-bitweights 18 GB20 GB

Tip: go 8-bit.FP8 / INT8 is within about a percent of full precision in quality, takes half the memory and runs faster on RTX 40/50 and H100. Full precision only pays off for fine-tuning.

This is a LoRA: counted together with its base model Qwen3.8-27B.

Estimate: weights plus working memory. Long videos, high resolutions and long contexts need more.

Run it on Massed Compute

The script downloads the model to the rented machine. How to run it is in the model card.

  1. 1. Rent a machine with a fitting GPU

    Open Massed Compute
  2. 2. Paste the script into the machine's terminal

    Connect over SSH (the Massed Compute panel shows the command) or open a terminal on the machine's desktop.

    HF_TOKEN / CIVITAI_TOKENThe script starts with token lines: paste yours between the quotes. The Hugging Face token is for gated models, the Civitai one for Civitai models.

    # helloelwin/ot-distill-qwen38-27b-new-data-v2-luna-6ep-lora
    # ===== Tokens: paste yours between the quotes =====
    export HF_TOKEN=""        # huggingface.co/settings/tokens, for gated models
    # ==========================================
    mkdir -p ~/models
    curl -LsSf https://astral.sh/uv/install.sh | sh
    source "$HOME/.local/bin/env"
    uv tool install "huggingface_hub[cli]"
    hf download Qwen/Qwen3.8-27B --local-dir ~/models/Qwen3.8-27B
    hf download helloelwin/ot-distill-qwen38-27b-new-data-v2-luna-6ep-lora --local-dir ~/models/ot-distill-qwen38-27b-new-data-v2-luna-6ep-lora
    # The model is in ~/models. How to run it is in the model card (link above).
    Add more LoRAs to Qwen3.8-27B
  3. 3. Use it

    The model is in ~/models. How to run it is in the model card (link above).

Stop the machine in the panel when you are done: it bills by the minute while it runs.

How to speed it up

Picked for this model type. Choose your hardware above to see what fits you exactly.

  • FlashAttention 44.0.0b40from November 18, 2026new release

    fastest exact attention on B200

    Kernels for Blackwell (beta). Exact attention without quantisation — fine for everything, LLMs included.

    How to enable: pip install flash-attn-4; vLLM and SGLang pick it up themselves.

    Earlier generations (2)
    • FlashAttention 3 — The Hopper (H100/H200) version with FP8.
    • FlashAttention 2 — The standard for RTX 30/40/50 and A100: exact attention without the memory cost of long contexts.
  • torch.compile2.15.0from October 28, 2026new release

    10–30% for free

    Compiles the model for your GPU. Slower first run, faster afterwards.

    How to enable: model = torch.compile(model); in ComfyUI the TorchCompileModel node.

Model family

Requires the base model

Qwen/Qwen3.8-27B

This model is a LoRA / adapter. Download the base model first, then load this one on top.

New posts about versions of Qwen3.8-27B (quants, finetunes, LoRAs) will show up under the bell.

Quantised versions 12All on Hugging Face
Fine-tunes 12All on Hugging Face
LoRAs and adapters 2All on Hugging Face

About the model

helloelwin/ot-distill-qwen38-27b-new-data-v2-luna-6ep-lora
Author
helloelwin
Category
Other
Released
Posted

On NeyroLearn

Hugging Face

00

Ask AI about this model

Answered by Gemini 4 · the chat is kept only in this tab

Comments