Skip to content
Robotics

pi0.5_rebot6

VLA-модель для управления роботом-манипулятором

2 min readupdated

Модель pi0.5_rebot6 от автора Deviant65 решает задачу управления роботом на основе визуальных данных и текстовых команд: на вход она получает состояние манипулятора и видеопоток с двух камер, а на выходе генерирует вектор действий для выполнения операции. Это дообученная версия архитектуры π0.5 (Vision-Language-Action модели от Physical Intelligence, созданной для обобщения на незнакомые среды) объёмом 4.14B параметров, построенная на базе lerobot/pi05_base с помощью фреймворка LeRobot. От базовой версии она отличается специализацией под конкретное железо и задачу: модель обучена поднимать синюю коробку и возвращать руку в исходное положение. Разработка пригодится робототехникам и исследователям, работающим с платформой LeRobot и манипуляторами серии rebot_b601_follower.

Ключевые особенности

  • Мультимодальный вход: анализирует вектор состояния робота размерностью (7,) и изображения 640×480 с двух камер (d415 и d405).
  • Готовый пайплайн LeRobot: совместима с версией библиотеки 0.7.1 и запускается стандартной консольной утилитой lerobot-rollout.
  • Обучение на реальных эпизодах: дообучена на датасете из 55 эпизодов (54 291 кадр при 30 FPS).
  • Архитектура π0.5: наследует возможности базовой модели от Physical Intelligence для работы в меняющихся условиях.

Что можно сделать

  • Запустить готовый сценарий захвата синей коробки и возврата в исходную позицию на роботе rebot_b601_follower с камерами d415 и d405.
  • Использовать чекпоинт и конфигурацию обучения как отправную точку для дообучения под схожие задачи манипуляции объектами через lerobot-train.
  • Протестировать работу политики на собственном стенде в непрерывном режиме без ограничения по времени (пропустив параметр --duration).

Пример

lerobot-rollout \
  --strategy.type=base \
  --robot.type=rebot_b601_follower \
  --robot.port= \
  --policy.path=Deviant65/pi0.5_rebot6 \
  --task="Pick up the blue box, then return the arm to the home position." \
  --duration=60
ПодробнееРазмер модели: 4.14B параметров, базовая модель — lerobot/pi05_base.
Обучение: 20 000 шагов, batch size 16, оптимизатор AdamW, learning rate 2.5e-05.
Ограничения: результаты оценки (evaluation) на реальном роботе в карточке пока не приведены; требует совпадения имён камер (d415, d405) и разрешения 640×480.
Лицензия: gemma.
Discuss Telegram 0 25

Will it run?

Runs in BF16

Fits without quantisation.

  • BF16weights 8.7 GB · ready files10 GB
  • FP8 / INT8recommendedweights 3.9 GB4.7 GB
  • 4-bitweights 2.2 GB2.9 GB

Tip: go 8-bit.FP8 / INT8 is within about a percent of full precision in quality, takes half the memory and runs faster on RTX 40/50 and H100. Full precision only pays off for fine-tuning.

What to get for this model

Massed ComputeOpen Massed Compute

Your own GPU: FP8 / INT8 — from RTX 2060 · BF16 — from RTX 2080 Ti

Massed Compute hourly prices, November 2026. The discounted price applies with the coupon at checkout.

Estimate: weights plus working memory. Long videos, high resolutions and long contexts need more.

Run it on Massed Compute

The script downloads the model to the rented machine. How to run it is in the model card.

  1. 1. Rent a machine with a fitting GPU

    Open Massed Compute
  2. 2. Paste the script into the machine's terminal

    Connect over SSH (the Massed Compute panel shows the command) or open a terminal on the machine's desktop.

    HF_TOKEN / CIVITAI_TOKENThe script starts with token lines: paste yours between the quotes. The Hugging Face token is for gated models, the Civitai one for Civitai models.

    # Deviant65/pi0.5_rebot6
    mkdir -p ~/models
    curl -LsSf https://astral.sh/uv/install.sh | sh
    source "$HOME/.local/bin/env"
    uv tool install "huggingface_hub[cli]"
    hf download Deviant65/pi0.5_rebot6 --local-dir ~/models/pi0.5_rebot6
    # The model is in ~/models. How to run it is in the model card (link above).
    Add more LoRAs to pi0.5_rebot6
  3. 3. Use it

    The model is in ~/models. How to run it is in the model card (link above).

Stop the machine in the panel when you are done: it bills by the minute while it runs.

How to speed it up

Picked for this model type. Choose your hardware above to see what fits you exactly.

  • FlashAttention 44.0.0b40from November 18, 2026new release

    fastest exact attention on B200

    Kernels for Blackwell (beta). Exact attention without quantisation — fine for everything, LLMs included.

    How to enable: pip install flash-attn-4; vLLM and SGLang pick it up themselves.

    Earlier generations (2)
    • FlashAttention 3 — The Hopper (H100/H200) version with FP8.
    • FlashAttention 2 — The standard for RTX 30/40/50 and A100: exact attention without the memory cost of long contexts.
  • torch.compile2.15.0from October 28, 2026new release

    10–30% for free

    Compiles the model for your GPU. Slower first run, faster afterwards.

    How to enable: model = torch.compile(model); in ComfyUI the TorchCompileModel node.

Model family

  1. paligemma-3b-pt-224family root
  2. pi05_base
  3. pi0.5_rebot6

New posts about versions of paligemma-3b-pt-224 (quants, finetunes, LoRAs) will show up under the bell.

Fine-tunes 12All on Hugging Face
LoRAs and adapters 12All on Hugging Face

About the model

Deviant65/pi0.5_rebot6
Author
Deviant65
Category
Robotics
Released
Posted

On NeyroLearn

Hugging Face

250

Ask AI about this model

Answered by Gemini 4 · the chat is kept only in this tab

Comments

Robotics

handoff

handoff