Skip to content
Video

MiniMax-H3 FlashGen Fused

ускоренная генерация видео за 4 шага

2 min read

Модель решает задачу генерации видео (и аудиосопровождения, судя по настройкам расписания) по текстовому описанию всего за 4 шага вместо стандартного длинного прогона. Она представляет собой трансформер базовой модели MiniMax-H3 (33,12 млрд параметров), в веса которого уже вшит ускоряющий адаптер LoRA (небольшая надстройка над базовой моделью) minimax-h3-4step-lora-flashgen от Beidouqixing и Huawei Ascend. В отличие от исходной модели, здесь не нужно отдельно подключать и применять LoRA на лету — веса уже объединены в формате bf16. Репозиторий пригодится тем, кто использует библиотеку diffusers и хочет сразу загрузить ускоренный трансформер для локальных экспериментов с видеогенерацией.

Ключевые особенности

  • Вшитая LoRA: адаптер Beidouqixing/minimax-h3-4step-lora-flashgen объединён с основным трансформером с накоплением точности в fp32 и сохранением в bf16.
  • Генерация за 4 шага: модель настроена на работу по сетке из 5 точек (4 шага сэмплера Euler).
  • Только трансформер: в репозитории нет текстового энкодера и VAE (вариационных автоэнкодеров), их необходимо подгружать из оригинального репозитория MiniMaxAI/MiniMax-H3.
  • Сдвиг сигм по модальностям: для корректной работы требуется применять формулу сдвига s*sigma / (1 + (s-1)*sigma) с коэффициентами 12.0 для видео и 3.0 для аудио.

Что можно сделать

  • Собрать быстрый пайплайн генерации видео в библиотеке diffusers, скомбинировав этот трансформер с текстовым энкодером и VAE от базовой MiniMax-H3.
  • Использовать готовую склейку для быстрого прототипирования роликов за 4 шага без ручного слияния весов перед запуском.

Пример

# Расчёт сдвинутых сигм для 4 шагов (5 точек сетки)
base_schedule = [1.0, 0.7, 0.4, 0.15, 0.0]
s_video, s_audio = 12.0, 3.0
sigmas_video = [s_video * s / (1 + (s_video - 1) * s) for s in base_schedule]
sigmas_audio = [s_audio * s / (1 + (s_audio - 1) * s) for s in base_schedule]
# Передайте полученные значения в scheduler.set_timesteps(sigmas=...)
ПодробнееРазмер модели: 33.12B параметров в точности bf16.
Ограничения: в репозитории отсутствует text encoder и VAE — их нужно брать из MiniMaxAI/MiniMax-H3.
Лицензия: MiniMax H3 Community License (оригинальная LoRA под Apache-2.0); при использовании в приложениях требуется указывать «MiniMax H3».
Discuss 0

Will it run?

Runs in 4-bit

Full precision does not fit, a quantised version does: quality barely changes down to 8 bits, more noticeably at 4 bits.

  • BF16weights 62 GB · ready files74 GB
  • FP8 / INT8recommendedweights 31 GB38 GB
  • 4-bitweights 17 GB23 GB

Tip: go 8-bit.FP8 / INT8 is within about a percent of full precision in quality, takes half the memory and runs faster on RTX 40/50 and H100. Full precision only pays off for fine-tuning.

Estimate: weights plus working memory. Long videos, high resolutions and long contexts need more.

Run it on Massed Compute

The script downloads the model to the rented machine. How to run it is in the model card.

  1. 1. Rent a machine with a fitting GPU

    Open Massed Compute
  2. 2. Paste the script into the machine's terminal

    Connect over SSH (the Massed Compute panel shows the command) or open a terminal on the machine's desktop.

    HF_TOKEN / CIVITAI_TOKENThe script starts with token lines: paste yours between the quotes. The Hugging Face token is for gated models, the Civitai one for Civitai models.

    # addlabsviral/minimax-h3-flashgen-fused
    mkdir -p ~/models
    curl -LsSf https://astral.sh/uv/install.sh | sh
    source "$HOME/.local/bin/env"
    uv tool install "huggingface_hub[cli]"
    hf download addlabsviral/minimax-h3-flashgen-fused --local-dir ~/models/minimax-h3-flashgen-fused
    # The model is in ~/models. How to run it is in the model card (link above).
  3. 3. Use it

    The model is in ~/models. How to run it is in the model card (link above).

Stop the machine in the panel when you are done: it bills by the minute while it runs.

How to speed it up

Picked for this model type. Choose your hardware above to see what fits you exactly.

  • SageAttention 3v2.2.0from October 28, 2025

    even faster on RTX 50 / Blackwell

    FP4 attention for Blackwell. Faster than SageAttention 2, but the authors suggest v2 when accuracy matters.

    How to enable: Build from the sageattention3_blackwell folder of the repo; in ComfyUI via KJNodes.

    Earlier generations (2)
    • SageAttention 2++ — Quantised (INT8/FP8) attention with no visible quality loss. The main speed-up for image and video generation.
    • SageAttention 1 — First version: INT8 for Q·K. Still works, but 2++ is faster and more accurate.
  • FlashAttention 44.0.0b40from November 18, 2026new release

    fastest exact attention on B200

    Kernels for Blackwell (beta). Exact attention without quantisation — fine for everything, LLMs included.

    How to enable: pip install flash-attn-4; vLLM and SGLang pick it up themselves.

    Earlier generations (3)
    • FlashAttention 3 — The Hopper (H100/H200) version with FP8.
    • FlashAttention 2 — The standard for RTX 30/40/50 and A100: exact attention without the memory cost of long contexts.
    • xFormers — The older way to speed up attention, works almost everywhere. Sage or Flash are faster where available.
  • cache-dit (DBCache)v1.5.6from November 20, 2026new release

    1.5–3× at nearly the same quality

    Reuses block outputs between diffusion steps. Supports most DiT models.

    How to enable: pip install cache-dit; one line cache_dit.enable_cache(pipe) for diffusers.

    Earlier generations (2)
    • MagCache — Skips steps by magnitude of change. More accurate than TeaCache, no calibration.
    • TeaCache — The first popular diffusion step cache. Works, newer methods are more accurate.
  • LightX2V step distill0.6.1from November 9, 2026new release

    5–10× fewer steps

    Distilled LoRAs and an engine: video in 4–8 steps instead of 30–50.

    How to enable: Load their step-distill LoRA, CFG 1.0, 4–8 steps.

  • torch.compile2.15.0from October 28, 2026new release

    10–30% for free

    Compiles the model for your GPU. Slower first run, faster afterwards.

    How to enable: model = torch.compile(model); in ComfyUI the TorchCompileModel node.

MiniMax H3 prompts

All prompts

Ready prompts with the resulting video: copy and try.

Model family

New posts about versions of MiniMax-H3 (quants, finetunes, LoRAs) will show up under the bell.

Quantised versions 12All on Hugging Face
Fine-tunes 12All on Hugging Face
LoRAs and adapters 12All on Hugging Face
Merges 3All on Hugging Face

About the model

addlabsviral/minimax-h3-flashgen-fused
Author
addlabsviral
Category
Video
Released
Posted

On NeyroLearn

Hugging Face

00

Ask AI about this model

Answered by Gemini 4 · the chat is kept only in this tab

Comments