Skip to content
Images

OLDX Person Swap LoRA

замена человека с сохранением позы и света

2 min read

OLDX Person Swap LoRA от yamanacn — адаптер для Qwen Image 2.1, который переносит человека с первого изображения на второе, сохраняя позу, фон и освещение целевого кадра. Это image-to-image LoRA для ComfyUI: в карточке есть готовый workflow и файл весов oldx_personswap_qwenimage2.1.safetensors. Размер и число параметров не указаны.

Ключевые особенности

  • Меняет человека из первого изображения во втором, сохраняя позу, фон и свет из целевого кадра.
  • Работает как LoRA для Qwen Image 2.1; есть готовый workflow для ComfyUI.
  • Рекомендуемая сила LoRA — 0.9; триггерное слово <rwth> workflow добавляет автоматически.
  • Маска не нужна более чем в 90% случаев; при выходе за границы она помогает ограничить область замены.
  • Опциональный 6-step LoRA ускоряет генерацию: на RTX 5090 около 10 секунд при ~2 Мп.
  • По заявлению автора, в слепых тестах LoRA обошла GPT и Seedream 5.0 Pro на проверенных сценах.

Пример

В ComfyUI откройте OLDX_personswap_ComfyUI.json, загрузите референсный портрет и целевое изображение в соответствующие группы. Для одиночной замены достаточно промпта: <rwth> Замените человека на изображении 2 человеком с изображения 1. Для сложных сцен в карточке есть системный промпт для расширения инструкции.

ПодробнееПо словам автора, в слепых тестах LoRA обошла GPT и Seedream 5.0 Pro на тестовых сценах.
Нужны Qwen Image 2.1, текстовый энкодер Qwen3-VL 8B, VAE и ComfyUI; маска требуется менее чем в 10% случаев.
С 6-step ускорителем на RTX 5090 генерация занимает около 10 секунд при ~2 Мп.
Ограничение: при сильном различии кадров, например полный рост → полурост, поза может не совпасть.
Лицензия базовой модели — qwen-research; заменяйте только те лица, на которые у вас есть права.
Примеры
Discuss Telegram 2

Will it run?

Runs in BF16

Fits without quantisation.

  • BF16weights 13 GB · ready files16 GB
  • FP8 / INT8recommendedweights 6.8 GB9.0 GB
  • 4-bitweights 3.9 GB5.8 GB

Tip: go 8-bit.FP8 / INT8 is within about a percent of full precision in quality, takes half the memory and runs faster on RTX 40/50 and H100. Full precision only pays off for fine-tuning.

What to get for this model

Massed ComputeOpen Massed Compute

Your own GPU: FP8 / INT8 — from RTX 3080 · BF16 — from RTX 4090

Massed Compute hourly prices, November 2026. The discounted price applies with the coupon at checkout.

This is a LoRA: counted together with its base model Qwen-Image-2.1.

Estimate: weights plus working memory. Long videos, high resolutions and long contexts need more.

Run it on Massed Compute

The script downloads the model to the rented machine. How to run it is in the model card.

  1. 1. Rent a machine with a fitting GPU

    Open Massed Compute
  2. 2. Paste the script into the machine's terminal

    Connect over SSH (the Massed Compute panel shows the command) or open a terminal on the machine's desktop.

    HF_TOKEN / CIVITAI_TOKENThe script starts with token lines: paste yours between the quotes. The Hugging Face token is for gated models, the Civitai one for Civitai models.

    # yamanacn/oldx_personswap_qwenimage2.1
    # ===== Tokens: paste yours between the quotes =====
    export HF_TOKEN=""        # huggingface.co/settings/tokens, for gated models
    # ==========================================
    mkdir -p ~/models
    curl -LsSf https://astral.sh/uv/install.sh | sh
    source "$HOME/.local/bin/env"
    uv tool install "huggingface_hub[cli]"
    hf download Qwen/Qwen-Image-2.1 --local-dir ~/models/Qwen-Image-2.1
    hf download yamanacn/oldx_personswap_qwenimage2.1 --local-dir ~/models/oldx_personswap_qwenimage2.1
    # The model is in ~/models. How to run it is in the model card (link above).
    Add more LoRAs to Qwen-Image-2.1
  3. 3. Use it

    The model is in ~/models. How to run it is in the model card (link above).

Stop the machine in the panel when you are done: it bills by the minute while it runs.

How to speed it up

Picked for this model type. Choose your hardware above to see what fits you exactly.

  • SageAttention 3v2.2.0from October 28, 2025

    even faster on RTX 50 / Blackwell

    FP4 attention for Blackwell. Faster than SageAttention 2, but the authors suggest v2 when accuracy matters.

    How to enable: Build from the sageattention3_blackwell folder of the repo; in ComfyUI via KJNodes.

    Earlier generations (2)
    • SageAttention 2++ — Quantised (INT8/FP8) attention with no visible quality loss. The main speed-up for image and video generation.
    • SageAttention 1 — First version: INT8 for Q·K. Still works, but 2++ is faster and more accurate.
  • FlashAttention 44.0.0b40from November 18, 2026new release

    fastest exact attention on B200

    Kernels for Blackwell (beta). Exact attention without quantisation — fine for everything, LLMs included.

    How to enable: pip install flash-attn-4; vLLM and SGLang pick it up themselves.

    Earlier generations (3)
    • FlashAttention 3 — The Hopper (H100/H200) version with FP8.
    • FlashAttention 2 — The standard for RTX 30/40/50 and A100: exact attention without the memory cost of long contexts.
    • xFormers — The older way to speed up attention, works almost everywhere. Sage or Flash are faster where available.
  • cache-dit (DBCache)v1.5.6from November 20, 2026new release

    1.5–3× at nearly the same quality

    Reuses block outputs between diffusion steps. Supports most DiT models.

    How to enable: pip install cache-dit; one line cache_dit.enable_cache(pipe) for diffusers.

    Earlier generations (2)
    • MagCache — Skips steps by magnitude of change. More accurate than TeaCache, no calibration.
    • TeaCache — The first popular diffusion step cache. Works, newer methods are more accurate.
  • Nunchaku (SVDQuant 4-bit)v1.2.1from January 25, 2026

    ≈3× faster and 3.5× less memory

    4-bit versions of popular image models with almost no quality loss (FP4 on RTX 50).

    How to enable: Ready weights for supported models; in ComfyUI use ComfyUI-nunchaku.

  • torch.compile2.15.0from October 28, 2026new release

    10–30% for free

    Compiles the model for your GPU. Slower first run, faster afterwards.

    How to enable: model = torch.compile(model); in ComfyUI the TorchCompileModel node.

Model family

Requires the base model

Qwen/Qwen-Image-2.1

This model is a LoRA / adapter. Download the base model first, then load this one on top.

New posts about versions of Qwen-Image-2.1 (quants, finetunes, LoRAs) will show up under the bell.

Quantised versions 12All on Hugging Face
Fine-tunes 12All on Hugging Face
LoRAs and adapters 12All on Hugging Face
Merges 4All on Hugging Face

About the model

yamanacn/oldx_personswap_qwenimage2.1
Author
yamanacn
Category
Images
Released
Posted

On NeyroLearn

Hugging Face

02

Ask AI about this model

Answered by Gemini 4 · the chat is kept only in this tab

Comments