Skip to content
Robotics

smolvla_lw_double_piper

нейросеть для управления двуруким роботом

2 min read

smolvla_lw_double_piper — это обученная политика управления (алгоритм действий для робототехники) от автора whosricky, созданная на базе компактной VLA-модели (Vision-Language-Action — нейросеть, объединяющая зрение, язык и действия) lerobot/smolvla_base размером 0.45B параметров. Модель принимает видеопоток с трёх камер и данные о текущем состоянии манипуляторов, а на выходе выдаёт вектор управляющих команд для выполнения бытовых задач. В отличие от базовой версии, она дообучена на специализированном датасете из 6500 эпизодов для двурукой платформы double_piper в рамках библиотеки LeRobot. Разработка пригодится робототехникам и исследователям, которые работают с манипуляторами Piper и тестируют автономное выполнение бытовых сценариев на локальном железе.

Ключевые особенности

  • Мультимодальный ввод: анализирует изображения с трёх камер (left_hand, first_person, right_hand) в разрешении 256×256 и вектор состояния робота из 6 параметров.
  • Управление двумя руками: генерирует 12-мерный вектор действий для синхронной работы двух манипуляторов double_piper.
  • Массивный обучающий набор: дообучена на датасете LightwheelAI/Lightwheel-Tasks-Double-Piper, содержащем 6500 эпизодов и более 6 миллионов кадров с частотой 50 FPS.
  • Компактный размер: база SmolVLA весит всего 0.45B параметров, что позволяет запускать инференс на потребительском оборудовании.

Что можно сделать

  • Автоматизация бытовых манипуляций: запустить на реальном или симулируемом роботе double_piper выполнение более сотни кухонных и настольных задач — от включения плиты и постановки гейзерной кофеварки до перекладывания продуктов в корзину и расстановки книг по отсекам.
  • База для дальнейшего дообучения: использовать веса как отправную точку в LeRobot (версии 0.7.0) для адаптации под собственные сценарии на аналогичной конфигурации камер и манипуляторов.

Пример

lerobot-rollout \
  --strategy.type=base \
  --robot.type=double_piper \
  --robot.port= \
  --robot.cameras="{ left_hand: {type: opencv, index_or_path: 0, width: 640, height: 480, fps: 30}, right_hand: {type: opencv, index_or_path: 1, width: 640, height: 480, fps: 30}}" \
  --policy.path=whosricky/smolvla_lw_double_piper \
  --task="L10K3TurnOnTheStoveAndPutTheMokaPotOnIt"
ПодробнееОбучение: 100 000 шагов, batch size 64, оптимизатор AdamW, learning rate 0.0001, seed 1000.
Ограничения: в карточке пока не опубликованы результаты замеров успешности (Evaluation) на реальном роботе.
Лицензия: Apache 2.0, совместимо с LeRobot 0.7.0.
Discuss Telegram 0

Will it run?

Runs in BF16

Fits without quantisation.

  • BF16weights 0.8 GB · ready files1.4 GB
  • FP8 / INT8recommendedweights 0.4 GB1.0 GB
  • 4-bitweights 0.2 GB0.8 GB

Tip: go 8-bit.FP8 / INT8 is within about a percent of full precision in quality, takes half the memory and runs faster on RTX 40/50 and H100. Full precision only pays off for fine-tuning.

What to get for this model

Massed ComputeOpen Massed Compute

Your own GPU: FP8 / INT8 — from RTX 2060 · BF16 — from RTX 2060

Massed Compute hourly prices, November 2026. The discounted price applies with the coupon at checkout.

Estimate: weights plus working memory. Long videos, high resolutions and long contexts need more.

Run it on Massed Compute

The script downloads the model to the rented machine. How to run it is in the model card.

  1. 1. Rent a machine with a fitting GPU

    Open Massed Compute
  2. 2. Paste the script into the machine's terminal

    Connect over SSH (the Massed Compute panel shows the command) or open a terminal on the machine's desktop.

    HF_TOKEN / CIVITAI_TOKENThe script starts with token lines: paste yours between the quotes. The Hugging Face token is for gated models, the Civitai one for Civitai models.

    # whosricky/smolvla_lw_double_piper
    mkdir -p ~/models
    curl -LsSf https://astral.sh/uv/install.sh | sh
    source "$HOME/.local/bin/env"
    uv tool install "huggingface_hub[cli]"
    hf download whosricky/smolvla_lw_double_piper --local-dir ~/models/smolvla_lw_double_piper
    # The model is in ~/models. How to run it is in the model card (link above).
  3. 3. Use it

    The model is in ~/models. How to run it is in the model card (link above).

Stop the machine in the panel when you are done: it bills by the minute while it runs.

How to speed it up

Picked for this model type. Choose your hardware above to see what fits you exactly.

  • FlashAttention 44.0.0b40from November 18, 2026new release

    fastest exact attention on B200

    Kernels for Blackwell (beta). Exact attention without quantisation — fine for everything, LLMs included.

    How to enable: pip install flash-attn-4; vLLM and SGLang pick it up themselves.

    Earlier generations (2)
    • FlashAttention 3 — The Hopper (H100/H200) version with FP8.
    • FlashAttention 2 — The standard for RTX 30/40/50 and A100: exact attention without the memory cost of long contexts.
  • torch.compile2.15.0from October 28, 2026new release

    10–30% for free

    Compiles the model for your GPU. Slower first run, faster afterwards.

    How to enable: model = torch.compile(model); in ComfyUI the TorchCompileModel node.

Model family

  1. SmolLM2-360Mfamily root
  2. SmolLM2-360M-Instruct
  3. SmolVLM-500M-Instruct
  4. SmolVLM2-500M-Video-Instruct
  5. smolvla_base
  6. smolvla_lw_double_piper

New posts about versions of SmolLM2-360M (quants, finetunes, LoRAs) will show up under the bell.

Quantised versions 12All on Hugging Face
Fine-tunes 12All on Hugging Face
LoRAs and adapters 8All on Hugging Face
Merges 1All on Hugging Face

About the model

whosricky/smolvla_lw_double_piper
Author
whosricky
Category
Robotics
Released
Posted

On NeyroLearn

Hugging Face

00

Ask AI about this model

Answered by Gemini 4 · the chat is kept only in this tab

Comments