Skip to content
Robotics

ExoWrist_Smolvla

набор моделей для управления манипулятором Piper

2 min readupdated

Экспериментальный репозиторий от автора Lyndow с чекпоинтами, исходным кодом и зависимостями для робототехнической политики на базе SmolVLA (Vision-Language-Action — модель, связывающая зрение и команды с действиями робота). Решает задачу генерации траекторий для манипулятора Piper и работы с захватом, а некоторые версии дополнены модулями распознавания намерений человека. В отличие от готовых систем управления, этот архив предназначен только для симуляции (MuJoCo и ассеты Isaac) и расчёта действий в JSON — прямая отправка команд на реальные моторы по CAN-шине здесь не реализована. Подойдёт исследователям робототехники и разработчикам VLA-моделей, которым нужны готовые веса и воспроизводимое окружение на базе LeRobot.

Ключевые особенности

  • Несколько вариантов чекпоинтов: включает базовую адаптацию F, версию J1 с совместным обучением головы намерений и консервативную сборку R1_conservative.
  • Мультимодальный вход: принимает три потока изображений (с дополнением до 512×512) и 7-мерное состояние робота (6 углов суставов и степень раскрытия схвата).
  • Горизонт планирования: модель генерирует блок из 10 шагов действий с частотой 30 Hz и перепланирует траекторию после выполнения первых 3 шагов.
  • Полный стек зависимостей: внутри архива сохранены веса SmolVLA/SmolVLM, DINOv2, Sapiens2, DETR, MediaPipe и фиксированный снимок библиотеки LeRobot.

Что можно сделать

  • Запустить офлайн-тестирование в симуляции: проверить расчёт действий для разных чекпоинтов (F, J1, R1_conservative) на ассетах манипулятора Piper без подключения реального железа.
  • Исследовать распознавание намерений: сравнить поведение стандартного эксперта действий F с версией J1, которая умеет сама определять момент, когда человеку требуется помощь.

Пример

python tools/bundle_inference.py --bundle . --model F --self-test
python tools/bundle_inference.py --bundle . --model J1 --self-test
python tools/bundle_inference.py --bundle . --model R1_conservative --self-test
ПодробнееСкорость работы: медианное время расчёта блока действий составляет ~583 мс (P95 — ~715 мс) на RTX 4080 SUPER.
Ограничения: проверка на реальном роботе не завершена, асинхронный контроль в реальном времени не реализован (inference_delay=0).
Установка: полный архив весит десятки ГБ; для запуска нужна Linux-система с GPU NVIDIA (скачивание на Mac не рекомендуется).
Важно: корень репозитория нельзя передавать напрямую в SmolVLAPolicy.from_pretrained() — используйте скрипты из папки tools/.
Discuss Telegram 0

Will it run?

Runs in BF16

Fits without quantisation.

  • BF16weights 0.4 GB · ready files0.9 GB
  • FP8 / INT8recommendedweights 0.2 GB0.7 GB
  • 4-bitweights 0.1 GB0.6 GB

Tip: go 8-bit.FP8 / INT8 is within about a percent of full precision in quality, takes half the memory and runs faster on RTX 40/50 and H100. Full precision only pays off for fine-tuning.

What to get for this model

Massed ComputeOpen Massed Compute

Your own GPU: FP8 / INT8 — from RTX 2060 · BF16 — from RTX 2060

Massed Compute hourly prices, November 2026. The discounted price applies with the coupon at checkout.

Estimate: weights plus working memory. Long videos, high resolutions and long contexts need more.

Run it on Massed Compute

The script downloads the model to the rented machine. How to run it is in the model card.

  1. 1. Rent a machine with a fitting GPU

    Open Massed Compute
  2. 2. Paste the script into the machine's terminal

    Connect over SSH (the Massed Compute panel shows the command) or open a terminal on the machine's desktop.

    HF_TOKEN / CIVITAI_TOKENThe script starts with token lines: paste yours between the quotes. The Hugging Face token is for gated models, the Civitai one for Civitai models.

    # Lyndow/ExoWrist_Smolvla
    mkdir -p ~/models
    curl -LsSf https://astral.sh/uv/install.sh | sh
    source "$HOME/.local/bin/env"
    uv tool install "huggingface_hub[cli]"
    hf download Lyndow/ExoWrist_Smolvla --local-dir ~/models/ExoWrist_Smolvla
    # The model is in ~/models. How to run it is in the model card (link above).
    Add more LoRAs to ExoWrist_Smolvla
  3. 3. Use it

    The model is in ~/models. How to run it is in the model card (link above).

Stop the machine in the panel when you are done: it bills by the minute while it runs.

How to speed it up

Picked for this model type. Choose your hardware above to see what fits you exactly.

  • FlashAttention 44.0.0b40from November 18, 2026new release

    fastest exact attention on B200

    Kernels for Blackwell (beta). Exact attention without quantisation — fine for everything, LLMs included.

    How to enable: pip install flash-attn-4; vLLM and SGLang pick it up themselves.

    Earlier generations (2)
    • FlashAttention 3 — The Hopper (H100/H200) version with FP8.
    • FlashAttention 2 — The standard for RTX 30/40/50 and A100: exact attention without the memory cost of long contexts.
  • torch.compile2.15.0from October 28, 2026new release

    10–30% for free

    Compiles the model for your GPU. Slower first run, faster afterwards.

    How to enable: model = torch.compile(model); in ComfyUI the TorchCompileModel node.

Model family

New posts about versions of ExoWrist_Smolvla (quants, finetunes, LoRAs) will show up under the bell.

No known relatives of this model yet. All derivatives on Hugging Face

About the model

Lyndow/ExoWrist_Smolvla
Author
Lyndow
Category
Robotics
Released
Posted

On NeyroLearn

Hugging Face

00

Ask AI about this model

Answered by Gemini 4 · the chat is kept only in this tab

Comments