Skip to content
Other

esp32-tiny-coding-model

нейросеть на 3M параметров для рисования на ESP32-S3

2 min readupdated

Компактная языковая модель, которая работает полностью автономно прямо на микроконтроллере ESP32-S3 без интернета и внешнего сервера. Вы отправляете на плату запрос на английском языке, а нейросеть пишет небольшую программу на Python-подобном языке для вывода графики и анимации на экран 128×64. Встроенный на чипе интерпретатор сразу же исполняет этот код с ограничениями по шагам и времени ожидания, чтобы устройство оставалось под контролем. Модель пригодится энтузиастам DIY, разработчикам встроенных систем и тем, кто экспериментирует с Edge AI (запуском нейросетей на микроконтроллерах).

Ключевые особенности

  • Сверхкомпактный размер: 2.9M основных параметров и 0.8M в таблице поиска (Per-Layer Embeddings), всего 2.1 МБ при 4-битном квантовании.
  • Генерация кода на простом языке с поддержкой примитивов (pixel, line, rect, circle, text), циклов и условий.
  • Высокая точность на целевых задачах: 98% отложенных запросов отрисовывают картинку, идентичную эталонной.
  • Полностью локальная работа на чипе со скоростью около 9 токенов в секунду (запрос «draw a house» выполняется за 5.6 секунды).

Что можно сделать

  • Выводить простую статичную графику и иконки на OLED-дисплей по текстовым командам через серийный порт.
  • Создавать текстовые поздравления и таймеры с обратным отсчётом прямо на плате без перепрошивки.
  • Генерировать простую покадровую анимацию вроде прыгающего мяча с помощью встроенных циклов и команды wait.

Пример

pip install esptool
esptool --chip esp32s3 --port /dev/ttyACM0 write-flash 0x0 esp32-oled-full.bin

После прошивки откройте порт на скорости 115200 бод и отправьте запрос, например: draw a house, countdown from 5 then happy birthday или bounce a ball twice quickly.

ПодробнееЖелезо: плата ESP32-S3 с 16 МБ Flash и 8 МБ PSRAM (octal), дисплей 128×64 SSD1306 I2C (SDA = GPIO 18, SCL = GPIO 8).
Обучение: около 300 000 пар «запрос — программа», сгенерированных по правилам и проверенных эталонным интерпретатором.
Токенизатор: byte-level BPE на 1 079 токенов.
Ограничения: понимает только запросы на английском языке, близкие к стилю обучающей выборки.
Discuss Telegram 0

Will it run?

Runs in BF16

Fits without quantisation.

  • BF16weights 0.0 GB · ready files0.5 GB
  • FP8 / INT8recommendedweights 0.0 GB0.5 GB
  • 4-bitweights 0.0 GB0.5 GB

Tip: go 8-bit.FP8 / INT8 is within about a percent of full precision in quality, takes half the memory and runs faster on RTX 40/50 and H100. Full precision only pays off for fine-tuning.

What to get for this model

Massed ComputeOpen Massed Compute

Your own GPU: FP8 / INT8 — from RTX 2060 · BF16 — from RTX 2060

Massed Compute hourly prices, November 2026. The discounted price applies with the coupon at checkout.

Estimate: weights plus working memory. Long videos, high resolutions and long contexts need more.

Run it on Massed Compute

The script downloads the model to the rented machine. How to run it is in the model card.

  1. 1. Rent a machine with a fitting GPU

    Open Massed Compute
  2. 2. Paste the script into the machine's terminal

    Connect over SSH (the Massed Compute panel shows the command) or open a terminal on the machine's desktop.

    HF_TOKEN / CIVITAI_TOKENThe script starts with token lines: paste yours between the quotes. The Hugging Face token is for gated models, the Civitai one for Civitai models.

    # Unt1l1f1nd/esp32-tiny-coding-model
    mkdir -p ~/models
    curl -LsSf https://astral.sh/uv/install.sh | sh
    source "$HOME/.local/bin/env"
    uv tool install "huggingface_hub[cli]"
    hf download Unt1l1f1nd/esp32-tiny-coding-model --local-dir ~/models/esp32-tiny-coding-model
    # The model is in ~/models. How to run it is in the model card (link above).
  3. 3. Use it

    The model is in ~/models. How to run it is in the model card (link above).

Stop the machine in the panel when you are done: it bills by the minute while it runs.

How to speed it up

Picked for this model type. Choose your hardware above to see what fits you exactly.

  • FlashAttention 44.0.0b40from November 18, 2026new release

    fastest exact attention on B200

    Kernels for Blackwell (beta). Exact attention without quantisation — fine for everything, LLMs included.

    How to enable: pip install flash-attn-4; vLLM and SGLang pick it up themselves.

    Earlier generations (2)
    • FlashAttention 3 — The Hopper (H100/H200) version with FP8.
    • FlashAttention 2 — The standard for RTX 30/40/50 and A100: exact attention without the memory cost of long contexts.
  • torch.compile2.15.0from October 28, 2026new release

    10–30% for free

    Compiles the model for your GPU. Slower first run, faster afterwards.

    How to enable: model = torch.compile(model); in ComfyUI the TorchCompileModel node.

Model family

New posts about versions of esp32-tiny-coding-model (quants, finetunes, LoRAs) will show up under the bell.

No known relatives of this model yet. All derivatives on Hugging Face

About the model

Unt1l1f1nd/esp32-tiny-coding-model
Author
Unt1l1f1nd
Category
Other
Released
Posted

On NeyroLearn

Hugging Face

00

Ask AI about this model

Answered by Gemini 4 · the chat is kept only in this tab

Comments