Skip to content
Images

P-Q-Image-2.1-Remove-Object

быстрое удаление объектов без искажения фона

2 min read

Набор LoRA-адаптеров (небольших надстроек над базовой моделью) от команды PrunaAI для Qwen/Qwen-Image-2.1, которые аккуратно стирают указанный объект с фотографии, включая его тени и отражения. В отличие от стандартной базы и ускоренных версий, которые часто меняют или слегка сдвигают остальной кадр, эти адаптеры оставляют нетронутую часть снимка полностью идентичной оригиналу. Для запуска доступны три варианта: ускоренные версии на 6 и 8 шагов без CFG (работают поверх дистиллированной модели PrunaAI/P-Q-Image-2.1) и классическая версия на 40 шагов для базовой модели. Инструмент пригодится фотографам, дизайнерам и разработчикам пайплайнов постобработки, которым нужен точный инпейнтинг без смещения пикселей.

Ключевые особенности

  • Точечное редактирование: удаляет не только сам предмет, но и связанные с ним тени и блики на поверхности, сохраняя остальное изображение без изменений.
  • Работа за 6 или 8 шагов: быстрые варианты запускаются с весом 0.7 поверх дистиллированной LoRA без использования CFG.
  • Гибкое выделение: достаточно обвести объект грубым красным контуром (#FF0000) через встроенный скрипт draw_outline.py или просто описать цель текстом.
  • Сохранение исходного масштаба: генерация подстраивается под площадь оригинального снимка (примеры в карточке показаны в разрешении ~2 MP).

Что можно сделать

  • Очистить уличные и пейзажные кадры от случайных прохожих, машин, строительных кранов или лишних предметов интерьера.
  • Убрать из кадра телефон, руку или отдельные элементы одежды на портретных снимках без потери текстуры фона.
  • Встроить 6-шаговый вариант в автоматический пайплайн на базе diffusers для быстрой пакетной ретуши фотографий.

Пример

pipe = QwenImage21Pipeline.from_pretrained("Qwen/Qwen-Image-2.1", torch_dtype=torch.bfloat16).to("cuda")
pipe.load_lora_weights("PrunaAI/P-Q-Image-2.1-Remove-Object", weight_name="p_q_image_2.1_remove_object_6_steps_v0.1.safetensors", adapter_name="removal")
pipe.load_lora_weights("PrunaAI/P-Q-Image-2.1", weight_name="p_q_image_2.1_6_steps_v0.2.safetensors", adapter_name="distill")
pipe.set_adapters(["distill", "removal"], adapter_weights=[1.0, 0.7])

edited = pipe(prompt=outline_prompt("Remove the red car on the left."), image=[draw_outline(photo, mask)], num_inference_steps=6, true_cfg_scale=1.0).images[0]
ПодробнееАрхитектура: LoRA rank 32 (три файла под 6 шагов, 8 шагов и базовую модель на 40 шагов).
Железо и софт: требуется видеокарта с поддержкой CUDA, библиотеки torch>=2.4.0, transformers>=5.17 и актуальный diffusers.
Ограничения: при весе LoRA ниже 0.5 объект может остаться на месте с изменённым цветом, а выше ~1.25 модель начинает захватывать соседние предметы; контур нужно сохранять в PNG без сжатия JPEG.
Примеры
Discuss Telegram 19 162

Will it run?

Runs in BF16

Fits without quantisation.

  • BF16weights 13 GB · ready files16 GB
  • FP8 / INT8recommendedweights 6.8 GB9.0 GB
  • 4-bitweights 3.9 GB5.8 GB

Tip: go 8-bit.FP8 / INT8 is within about a percent of full precision in quality, takes half the memory and runs faster on RTX 40/50 and H100. Full precision only pays off for fine-tuning.

What to get for this model

Massed ComputeOpen Massed Compute

Your own GPU: FP8 / INT8 — from RTX 3080 · BF16 — from RTX 4090

Massed Compute hourly prices, November 2026. The discounted price applies with the coupon at checkout.

This is a LoRA: counted together with its base model Qwen-Image-2.1.

Estimate: weights plus working memory. Long videos, high resolutions and long contexts need more.

Run it on Massed Compute

The script downloads the model to the rented machine. How to run it is in the model card.

  1. 1. Rent a machine with a fitting GPU

    Open Massed Compute
  2. 2. Paste the script into the machine's terminal

    Connect over SSH (the Massed Compute panel shows the command) or open a terminal on the machine's desktop.

    HF_TOKEN / CIVITAI_TOKENThe script starts with token lines: paste yours between the quotes. The Hugging Face token is for gated models, the Civitai one for Civitai models.

    # PrunaAI/P-Q-Image-2.1-Remove-Object
    # ===== Tokens: paste yours between the quotes =====
    export HF_TOKEN=""        # huggingface.co/settings/tokens, for gated models
    # ==========================================
    mkdir -p ~/models
    curl -LsSf https://astral.sh/uv/install.sh | sh
    source "$HOME/.local/bin/env"
    uv tool install "huggingface_hub[cli]"
    hf download Qwen/Qwen-Image-2.1 --local-dir ~/models/Qwen-Image-2.1
    hf download PrunaAI/P-Q-Image-2.1-Remove-Object --local-dir ~/models/P-Q-Image-2.1-Remove-Object
    # The model is in ~/models. How to run it is in the model card (link above).
    Add more LoRAs to Qwen-Image-2.1
  3. 3. Use it

    The model is in ~/models. How to run it is in the model card (link above).

Stop the machine in the panel when you are done: it bills by the minute while it runs.

How to speed it up

Picked for this model type. Choose your hardware above to see what fits you exactly.

  • SageAttention 3v2.2.0from October 28, 2025

    even faster on RTX 50 / Blackwell

    FP4 attention for Blackwell. Faster than SageAttention 2, but the authors suggest v2 when accuracy matters.

    How to enable: Build from the sageattention3_blackwell folder of the repo; in ComfyUI via KJNodes.

    Earlier generations (2)
    • SageAttention 2++ — Quantised (INT8/FP8) attention with no visible quality loss. The main speed-up for image and video generation.
    • SageAttention 1 — First version: INT8 for Q·K. Still works, but 2++ is faster and more accurate.
  • FlashAttention 44.0.0b40from November 18, 2026new release

    fastest exact attention on B200

    Kernels for Blackwell (beta). Exact attention without quantisation — fine for everything, LLMs included.

    How to enable: pip install flash-attn-4; vLLM and SGLang pick it up themselves.

    Earlier generations (3)
    • FlashAttention 3 — The Hopper (H100/H200) version with FP8.
    • FlashAttention 2 — The standard for RTX 30/40/50 and A100: exact attention without the memory cost of long contexts.
    • xFormers — The older way to speed up attention, works almost everywhere. Sage or Flash are faster where available.
  • cache-dit (DBCache)v1.5.6from November 20, 2026new release

    1.5–3× at nearly the same quality

    Reuses block outputs between diffusion steps. Supports most DiT models.

    How to enable: pip install cache-dit; one line cache_dit.enable_cache(pipe) for diffusers.

    Earlier generations (2)
    • MagCache — Skips steps by magnitude of change. More accurate than TeaCache, no calibration.
    • TeaCache — The first popular diffusion step cache. Works, newer methods are more accurate.
  • Nunchaku (SVDQuant 4-bit)v1.2.1from January 25, 2026

    ≈3× faster and 3.5× less memory

    4-bit versions of popular image models with almost no quality loss (FP4 on RTX 50).

    How to enable: Ready weights for supported models; in ComfyUI use ComfyUI-nunchaku.

  • torch.compile2.15.0from October 28, 2026new release

    10–30% for free

    Compiles the model for your GPU. Slower first run, faster afterwards.

    How to enable: model = torch.compile(model); in ComfyUI the TorchCompileModel node.

Model family

Requires the base model

Qwen/Qwen-Image-2.1

This model is a LoRA / adapter. Download the base model first, then load this one on top.

New posts about versions of Qwen-Image-2.1 (quants, finetunes, LoRAs) will show up under the bell.

Quantised versions 12All on Hugging Face
Fine-tunes 12All on Hugging Face
LoRAs and adapters 12All on Hugging Face
Merges 4All on Hugging Face

About the model

PrunaAI/P-Q-Image-2.1-Remove-Object
Author
PrunaAI
Category
Images
Released
Posted

On NeyroLearn

Hugging Face

16219

Ask AI about this model

Answered by Gemini 4 · the chat is kept only in this tab

Comments