Skip to content
Robotics

phiba/act_dice

политика управления роботом для броска кубика d6

2 min readupdated

Модель представляет собой политику управления роботом-манипулятором so_follower, обученную бросать шестигранный игральный кубик (задача «throwing a d6»). На вход она получает текущее состояние 6 степеней свободы робота и видеопоток с двух камер (arm и top), а на выходе предсказывает короткие последовательности действий для приводов. Модель построена на архитектуре ACT (Action Chunking with Transformers — метод обучения с подражанием, который генерирует сразу группу последовательных шагов вместо одиночных команд) с использованием библиотеки LeRobot версии 0.7.0 от автора phiba. Она пригодится разработчикам и энтузиастам робототехники, работающим с манипуляторами семейства SO-Follower, как готовый пример переноса навыков телеуправления на физическое устройство.

Ключевые особенности

  • Предсказание пакетов действий: архитектура ACT формирует короткие серии команд на основе демонстраций телеуправления, что делает движения манипулятора более плавными и точными.
  • Мультимодальный вход: политика одновременно анализирует вектор состояния робота (6 параметров) и изображения разрешением 640×480 с двух ракурсов — с камеры на руке и верхней обзорной камеры.
  • Компактный размер: модель содержит всего 0.05B (50 млн) параметров, что позволяет запускать её в реальном времени с частотой 30 FPS.
  • Открытый датасет обучения: модель обучена на 54 записанных эпизодах (12 650 кадров), опубликованных в репозитории phiba/dice_20261114_151703.

Что можно сделать

  • Запустить на реальном роботе: развернуть политику на манипуляторе so_follower с двумя подключёнными камерами для автоматического броска кубика.
  • Использовать как базу для дообучения: взять конфигурацию и пайплайн LeRobot для тренировки собственных политик на похожих задачах манипуляции мелкими предметами.
  • Изучить на практике пайплайн ACT: протестировать инференс через CLI-утилиту lerobot-rollout, сверяясь с открытым тренировочным датасетом автора.

Пример

lerobot-rollout \
  --strategy.type=base \
  --robot.type=so_follower \
  --robot.port= \
  --robot.cameras="{ arm: {type: opencv, index_or_path: , width: 640, height: 480, fps: 30}, top: {type: opencv, index_or_path: , width: 640, height: 480, fps: 30}}" \
  --policy.path=phiba/act_dice \
  --task="throwing a d6" \
  --duration=60
ПодробнееОбучение: 50 000 шагов, batch size 32, оптимизатор AdamW, learning rate 1e-05, seed 1000.
Датасет: 54 эпизода (12 650 кадров) при частоте 30 FPS.
Бенчмарки и результаты замеров успешности на реальном роботе в карточке пока не представлены.
Требования: подключённый робот so_follower и две OpenCV-камеры (640×480, 30 FPS) с именами arm и top.
Discuss Telegram 0 22

Will it run?

Runs in F32

Fits without quantisation.

  • F32weights 0.2 GB · ready files0.7 GB
  • BF16weights 0.1 GB0.6 GB
  • FP8 / INT8recommendedweights 0.0 GB0.6 GB
  • 4-bitweights 0.0 GB0.5 GB

Tip: go 8-bit.FP8 / INT8 is within about a percent of full precision in quality, takes half the memory and runs faster on RTX 40/50 and H100. Full precision only pays off for fine-tuning.

What to get for this model

Massed ComputeOpen Massed Compute

Your own GPU: FP8 / INT8 — from RTX 2060 · F32 — from RTX 2060

Massed Compute hourly prices, November 2026. The discounted price applies with the coupon at checkout.

Estimate: weights plus working memory. Long videos, high resolutions and long contexts need more.

Run it on Massed Compute

The script downloads the model to the rented machine. How to run it is in the model card.

  1. 1. Rent a machine with a fitting GPU

    Open Massed Compute
  2. 2. Paste the script into the machine's terminal

    Connect over SSH (the Massed Compute panel shows the command) or open a terminal on the machine's desktop.

    HF_TOKEN / CIVITAI_TOKENThe script starts with token lines: paste yours between the quotes. The Hugging Face token is for gated models, the Civitai one for Civitai models.

    # phiba/act_dice
    mkdir -p ~/models
    curl -LsSf https://astral.sh/uv/install.sh | sh
    source "$HOME/.local/bin/env"
    uv tool install "huggingface_hub[cli]"
    hf download phiba/act_dice --local-dir ~/models/act_dice
    # The model is in ~/models. How to run it is in the model card (link above).
    Add more LoRAs to act_dice
  3. 3. Use it

    The model is in ~/models. How to run it is in the model card (link above).

Stop the machine in the panel when you are done: it bills by the minute while it runs.

How to speed it up

Picked for this model type. Choose your hardware above to see what fits you exactly.

  • FlashAttention 44.0.0b40from November 18, 2026new release

    fastest exact attention on B200

    Kernels for Blackwell (beta). Exact attention without quantisation — fine for everything, LLMs included.

    How to enable: pip install flash-attn-4; vLLM and SGLang pick it up themselves.

    Earlier generations (2)
    • FlashAttention 3 — The Hopper (H100/H200) version with FP8.
    • FlashAttention 2 — The standard for RTX 30/40/50 and A100: exact attention without the memory cost of long contexts.
  • torch.compile2.15.0from October 28, 2026new release

    10–30% for free

    Compiles the model for your GPU. Slower first run, faster afterwards.

    How to enable: model = torch.compile(model); in ComfyUI the TorchCompileModel node.

Model family

New posts about versions of act_dice (quants, finetunes, LoRAs) will show up under the bell.

No known relatives of this model yet. All derivatives on Hugging Face

About the model

phiba/act_dice
Author
phiba
Category
Robotics
Released
Posted

On NeyroLearn

Hugging Face

220

Ask AI about this model

Answered by Gemini 4 · the chat is kept only in this tab

Comments