Skip to content
Images

Real-ESRGAN-MLX

апскейл фото в 4 раза на чипах Apple Silicon

2 min read

Порт популярной модели улучшения и увеличения изображений Real-ESRGAN x4plus (RealESRGAN_x4plus.pth) на фреймворк MLX от команды Moonbox. Модель решает задачу blind super-resolution — повышает разрешение картинок в 4 раза и восстанавливает детали на обычных фотографиях. Сборка предназначена специально для Mac с процессорами Apple Silicon и избавляет от необходимости тянуть тяжёлые зависимости вроде PyTorch: для запуска нужны только mlx и numpy. Подойдёт владельцам Mac, которым нужен быстрый локальный апскейлер для обработки фото или интеграции в свои Python-скрипты.

Ключевые особенности

  • Две версии точности: доступны папки с весами в форматах fp16 и bf16, каждая весит всего 33,5 МБ.
  • Минимальные расхождения с оригиналом: вариант fp16 почти идентичен оригинальной PyTorch-версии (средний PSNR 54,3 дБ, LPIPS не выше 0,0004).
  • Высокая скорость работы: апскейл изображения ~130×130 в 4 раза на чипе M5 занимает 0,25 с для fp16 и 0,28 с для bf16.
  • Тайловая обработка: встроенная функция upscale обрабатывает картинку фрагментами (тайлами по 256 пикселей), что экономит память.

Что можно сделать

  • Повышать разрешение старых или сжатых фотографий в 4 раза локально на MacBook без облачных сервисов и видеокарт NVIDIA.
  • Встроить лёгкий 33-мегабайтный модуль в локальный пайплайн генерации изображений на MLX для постобработки готовых кадров.
  • Пакетно улучшать фотоархивы через простой Python-скрипт без установки PyTorch и BasicSR.

Пример

import numpy as np, mlx_model
from PIL import Image
model = mlx_model.load("fp16")
out = mlx_model.upscale(model, np.array(Image.open("in.png").convert("RGB")))
Image.fromarray(out).save("out.png")
ПодробнееКачество относительно PyTorch fp32: fp16 — PSNR 54,3 дБ в среднем (46,9 дБ минимум), LPIPS <= 0,0004; bf16 — PSNR 40,8 дБ в среднем (30,7 дБ минимум), LPIPS <= 0,015.
Квантованных версий (8/6/4-bit) нет, так как сеть полностью состоит из свёрточных слоёв, которые MLX не квантует.
Для работы необходимо держать все файлы из выбранной папки (model.safetensors, config.json, mlx_model.py) вместе.
Лицензия: BSD-3-Clause.
Discuss Telegram 0

Will it run?

Runs in BF16

Fits without quantisation.

  • BF16weights 0.0 GB · ready files1.5 GB
  • FP8 / INT8recommendedweights 0.0 GB1.5 GB
  • 4-bitweights 0.0 GB1.5 GB

Tip: go 8-bit.FP8 / INT8 is within about a percent of full precision in quality, takes half the memory and runs faster on RTX 40/50 and H100. Full precision only pays off for fine-tuning.

What to get for this model

Massed ComputeOpen Massed Compute

Your own GPU: FP8 / INT8 — from RTX 2060 · BF16 — from RTX 2060

Massed Compute hourly prices, November 2026. The discounted price applies with the coupon at checkout.

Estimate: weights plus working memory. Long videos, high resolutions and long contexts need more.

Run it on Massed Compute

The script downloads the model to the rented machine. How to run it is in the model card.

  1. 1. Rent a machine with a fitting GPU

    Open Massed Compute
  2. 2. Paste the script into the machine's terminal

    Connect over SSH (the Massed Compute panel shows the command) or open a terminal on the machine's desktop.

    HF_TOKEN / CIVITAI_TOKENThe script starts with token lines: paste yours between the quotes. The Hugging Face token is for gated models, the Civitai one for Civitai models.

    # moonbox-dev/Real-ESRGAN-MLX
    mkdir -p ~/models
    curl -LsSf https://astral.sh/uv/install.sh | sh
    source "$HOME/.local/bin/env"
    uv tool install "huggingface_hub[cli]"
    hf download moonbox-dev/Real-ESRGAN-MLX --local-dir ~/models/Real-ESRGAN-MLX
    # The model is in ~/models. How to run it is in the model card (link above).
    Add more LoRAs to Real-ESRGAN-MLX
  3. 3. Use it

    The model is in ~/models. How to run it is in the model card (link above).

Stop the machine in the panel when you are done: it bills by the minute while it runs.

How to speed it up

Picked for this model type. Choose your hardware above to see what fits you exactly.

  • SageAttention 3v2.2.0from October 28, 2025

    even faster on RTX 50 / Blackwell

    FP4 attention for Blackwell. Faster than SageAttention 2, but the authors suggest v2 when accuracy matters.

    How to enable: Build from the sageattention3_blackwell folder of the repo; in ComfyUI via KJNodes.

    Earlier generations (2)
    • SageAttention 2++ — Quantised (INT8/FP8) attention with no visible quality loss. The main speed-up for image and video generation.
    • SageAttention 1 — First version: INT8 for Q·K. Still works, but 2++ is faster and more accurate.
  • FlashAttention 44.0.0b40from November 18, 2026new release

    fastest exact attention on B200

    Kernels for Blackwell (beta). Exact attention without quantisation — fine for everything, LLMs included.

    How to enable: pip install flash-attn-4; vLLM and SGLang pick it up themselves.

    Earlier generations (3)
    • FlashAttention 3 — The Hopper (H100/H200) version with FP8.
    • FlashAttention 2 — The standard for RTX 30/40/50 and A100: exact attention without the memory cost of long contexts.
    • xFormers — The older way to speed up attention, works almost everywhere. Sage or Flash are faster where available.
  • cache-dit (DBCache)v1.5.6from November 20, 2026new release

    1.5–3× at nearly the same quality

    Reuses block outputs between diffusion steps. Supports most DiT models.

    How to enable: pip install cache-dit; one line cache_dit.enable_cache(pipe) for diffusers.

    Earlier generations (2)
    • MagCache — Skips steps by magnitude of change. More accurate than TeaCache, no calibration.
    • TeaCache — The first popular diffusion step cache. Works, newer methods are more accurate.
  • Nunchaku (SVDQuant 4-bit)v1.2.1from January 25, 2026

    ≈3× faster and 3.5× less memory

    4-bit versions of popular image models with almost no quality loss (FP4 on RTX 50).

    How to enable: Ready weights for supported models; in ComfyUI use ComfyUI-nunchaku.

  • torch.compile2.15.0from October 28, 2026new release

    10–30% for free

    Compiles the model for your GPU. Slower first run, faster afterwards.

    How to enable: model = torch.compile(model); in ComfyUI the TorchCompileModel node.

Model family

New posts about versions of Real-ESRGAN-MLX (quants, finetunes, LoRAs) will show up under the bell.

No known relatives of this model yet. All derivatives on Hugging Face

About the model

moonbox-dev/Real-ESRGAN-MLX
Author
moonbox-dev
Category
Images
Released
Posted

On NeyroLearn

Hugging Face

00

Ask AI about this model

Answered by Gemini 4 · the chat is kept only in this tab

Comments

Images

Cyberboi

Cyberboi18+
Images

WebSR

WebSR