Skip to content
Robotics

ACT_libero

политика для робота Panda на LeRobot

1 min readupdated

ACT (Action Chunking with Transformers) — метод imitation learning, который предсказывает короткие чанки действий вместо отдельных шагов. Это чекпоинт LeRobot для робота Panda, обученный на датасете LIBERO: 1693 эпизода, 273 465 кадров при 10 FPS. Размер модели — около 50M параметров.

Ключевые особенности

  • Предсказывает чанки действий, а не пошаговые команды.
  • Обучен для робота Panda; на входе два изображения и state, на выходе 7-мерное действие.
  • Камеры image и image2, входные кадры 3×256×256.
  • Датасет LIBERO: 1693 эпизода, 273 465 кадров, 10 FPS.
  • Обучение в LeRobot 0.7.1: 20 000 шагов, batch size 8, AdamW, lr 1e-5.
  • Опубликованных результатов оценки на реальном роботе пока нет.

Пример

lerobot-rollout --strategy.type=base --robot.type=panda --robot.port=<your_robot_port> --policy.path=Jackyiii/ACT_libero --task="put the white mug on the left plate and put the yellow and white mug on the right plate" --duration=60
ПодробнееОценка на реальном роботе не приведена.
Вход: два изображения 3×256×256 и state (8,); выход: action (7,).
Обучение: 20 000 шагов, batch size 8, AdamW, lr 1e-5, seed 1000, LeRobot 0.7.1.
Для запуска нужны Panda и камеры с именами, совпадающими с observation-ключами.
Discuss Telegram 0 23

Will it run?

Runs in F32

Fits without quantisation.

  • F32weights 0.2 GB · ready files0.7 GB
  • BF16weights 0.1 GB0.6 GB
  • FP8 / INT8recommendedweights 0.0 GB0.6 GB
  • 4-bitweights 0.0 GB0.5 GB

Tip: go 8-bit.FP8 / INT8 is within about a percent of full precision in quality, takes half the memory and runs faster on RTX 40/50 and H100. Full precision only pays off for fine-tuning.

What to get for this model

Massed ComputeOpen Massed Compute

Your own GPU: FP8 / INT8 — from RTX 2060 · F32 — from RTX 2060

Massed Compute hourly prices, November 2026. The discounted price applies with the coupon at checkout.

Estimate: weights plus working memory. Long videos, high resolutions and long contexts need more.

Run it on Massed Compute

The script downloads the model to the rented machine. How to run it is in the model card.

  1. 1. Rent a machine with a fitting GPU

    Open Massed Compute
  2. 2. Paste the script into the machine's terminal

    Connect over SSH (the Massed Compute panel shows the command) or open a terminal on the machine's desktop.

    HF_TOKEN / CIVITAI_TOKENThe script starts with token lines: paste yours between the quotes. The Hugging Face token is for gated models, the Civitai one for Civitai models.

    # Jackyiii/ACT_libero
    mkdir -p ~/models
    curl -LsSf https://astral.sh/uv/install.sh | sh
    source "$HOME/.local/bin/env"
    uv tool install "huggingface_hub[cli]"
    hf download Jackyiii/ACT_libero --local-dir ~/models/ACT_libero
    # The model is in ~/models. How to run it is in the model card (link above).
    Add more LoRAs to ACT_libero
  3. 3. Use it

    The model is in ~/models. How to run it is in the model card (link above).

Stop the machine in the panel when you are done: it bills by the minute while it runs.

How to speed it up

Picked for this model type. Choose your hardware above to see what fits you exactly.

  • FlashAttention 44.0.0b40from November 18, 2026new release

    fastest exact attention on B200

    Kernels for Blackwell (beta). Exact attention without quantisation — fine for everything, LLMs included.

    How to enable: pip install flash-attn-4; vLLM and SGLang pick it up themselves.

    Earlier generations (2)
    • FlashAttention 3 — The Hopper (H100/H200) version with FP8.
    • FlashAttention 2 — The standard for RTX 30/40/50 and A100: exact attention without the memory cost of long contexts.
  • torch.compile2.15.0from October 28, 2026new release

    10–30% for free

    Compiles the model for your GPU. Slower first run, faster afterwards.

    How to enable: model = torch.compile(model); in ComfyUI the TorchCompileModel node.

Model family

New posts about versions of ACT_libero (quants, finetunes, LoRAs) will show up under the bell.

No known relatives of this model yet. All derivatives on Hugging Face

About the model

Jackyiii/ACT_libero
Author
Jackyiii
Category
Robotics
Released
Posted

On NeyroLearn

Hugging Face

230

Ask AI about this model

Answered by Gemini 4 · the chat is kept only in this tab

Comments