SmolVLA LangPush
text-guided robotic arm control in simulation
2 min readupdated
irodkin/smolvla-langpush-run11 is a fine-tuned 0.45B-parameter VLA model (Vision-Language-Action, a model connecting vision, text, and robot actions) built on lerobot/smolvla_base. It controls a pusher on a Seeed reBot Arm B601-RS manipulator equipped with a wrist-mounted camera inside the MuJoCo simulator. Given a camera image and a text prompt—to push either a red or blue cube into a green target zone—the model outputs an end-effector trajectory. The authors (the ROB7103/8103 Embodied AI team) ensured the policy actually grounds the color mentioned in the text rather than guessing the target from the arm's initial pose, making it useful for researchers in robotics and reinforcement learning.
Key features
- True text grounding: distinguishes between commands for the red and blue cubes in 186 out of 192 test runs (96.9% success rate), even in symmetric scenes.
- Relative action mode (Delta mode): predicts tip translation and rotation in its own local coordinate frame, receiving only the gravity direction as state input.
- Targeted VLM fine-tuning: alongside the action module, the top 8 layers of the vision-language model were fine-tuned in float32, enabling the model to link words to objects in the frame.
- High-frequency planning: generates 50-action chunks at 30 fps, replanning every 10 frames from a single camera feed.
What you can do
- Test the control policy for the Seeed reBot Arm B601-RS manipulator in MuJoCo simulation on color-based object selection tasks.
- Use the relative-coordinate approach (delta mode) and top-layer VLM unfreezing as a reference when training custom policies in the
lerobotlibrary.
Example
from lerobot.policies.smolvla.modeling_smolvla import SmolVLAPolicy
policy = SmolVLAPolicy.from_pretrained("irodkin/smolvla-langpush-run11")Read more
DetailsMetrics (192 tests): 186 successful runs (93/96 for the red cube and 93/96 for the blue cube), with the initial plan heading straight toward the target cube in 99% of cases.
Training: 30,000 steps on 10,000 demos + 20,000 steps with a refreshed learning rate schedule (batch size 64).
Limitations: works only in MuJoCo simulation (untested on real hardware) and is built strictly for two 4 cm cubes, a 6 cm green target zone, and delta-mode control.










Comments