Skip to content
Audio

PiVo-1.4M

два голоса в 1,4 млн параметров

2 min read

PiVo — исследовательская TTS-модель от Empero Research с двумя английскими голосами, Pi и Vo. Это полный стек с 1 401 562 обучаемыми параметрами: акустическая модель на 584 965 параметров и FARGAN-производный вокодер на 816 597 параметров выдают 16 kHz mono. Всё работает локально на CPU через NumPy и ONNX Runtime, без PyTorch и сети на инференсе.

Ключевые особенности

  • Два голоса, Pi и Vo, только для английского; фронтенд ищет слова в CMU Pronouncing Dictionary и раскрывает числа, суммы в валютах, порядковые и ISO-даты.
  • Полный TTS-стек на 1,4 млн параметров, включая вокодер; инференс локально на CPU через NumPy и ONNX Runtime.
  • Акустическая модель предсказывает 18 кепстральных коэффициентов, pitch и pitch correlation каждые 10 мс; вокодер собирает четыре 40-сэмпловых субфрейма на кадр.
  • iter_audio отдаёт аудио кадрами по 10 мс — воспроизведение можно начинать до конца генерации.
  • Незнакомые слова без ARPAbet-override вызывают ошибку; лимит 2 000 символов / 512 токенов фронтенда, до 30 секунд на высказывание.

Пример

from pivo import PiVo

model = PiVo(".", threads=1)
model.save("pi.wav", "NASA is ready for the next mission.", voice="Pi")

audio = model.synthesize("Hello, my name is Vo.", voice="Vo", speed=1.0)
# float32 mono PCM at 16000 Hz
ПодробнееWER на отложенных данных: 0,863% (114 фраз) и 0,532% (152) по расшифровке Whisper small.en; это не общий английский бенчмарк.
Обучение: синтетические голоса созданы с Qwen3-TTS VoiceDesign, данные записаны Qwen3-TTS Base; 8 628 фраз, ~12,29 ч аудио (10,77 ч после обрезки тишины).
Инференс: CPU, NumPy + ONNX Runtime; PyTorch, speaker encoder и сеть не нужны, VRAM не требуется.
Ограничения: местами металлический или роботизированный тембр, произношение только по CMU-словарю и overrides, оценка естественности от одного слушателя.
Discuss Telegram 41

Will it run?

Runs in BF16

Fits without quantisation.

  • BF16weights 0.0 GB · ready files0.5 GB
  • FP8 / INT8recommendedweights 0.0 GB0.5 GB
  • 4-bitweights 0.0 GB0.5 GB

Tip: go 8-bit.FP8 / INT8 is within about a percent of full precision in quality, takes half the memory and runs faster on RTX 40/50 and H100. Full precision only pays off for fine-tuning.

What to get for this model

Massed ComputeOpen Massed Compute

Your own GPU: FP8 / INT8 — from RTX 2060 · BF16 — from RTX 2060

Massed Compute hourly prices, November 2026. The discounted price applies with the coupon at checkout.

Estimate: weights plus working memory. Long videos, high resolutions and long contexts need more.

Run it on Massed Compute

The script downloads the model to the rented machine. How to run it is in the model card.

  1. 1. Rent a machine with a fitting GPU

    Open Massed Compute
  2. 2. Paste the script into the machine's terminal

    Connect over SSH (the Massed Compute panel shows the command) or open a terminal on the machine's desktop.

    HF_TOKEN / CIVITAI_TOKENThe script starts with token lines: paste yours between the quotes. The Hugging Face token is for gated models, the Civitai one for Civitai models.

    # empero-ai/PiVo-1.4M
    mkdir -p ~/models
    curl -LsSf https://astral.sh/uv/install.sh | sh
    source "$HOME/.local/bin/env"
    uv tool install "huggingface_hub[cli]"
    hf download empero-ai/PiVo-1.4M --local-dir ~/models/PiVo-1.4M
    # The model is in ~/models. How to run it is in the model card (link above).
    Add more LoRAs to PiVo-1.4M
  3. 3. Use it

    The model is in ~/models. How to run it is in the model card (link above).

Stop the machine in the panel when you are done: it bills by the minute while it runs.

How to speed it up

Picked for this model type. Choose your hardware above to see what fits you exactly.

  • FlashAttention 44.0.0b40from November 18, 2026new release

    fastest exact attention on B200

    Kernels for Blackwell (beta). Exact attention without quantisation — fine for everything, LLMs included.

    How to enable: pip install flash-attn-4; vLLM and SGLang pick it up themselves.

    Earlier generations (2)
    • FlashAttention 3 — The Hopper (H100/H200) version with FP8.
    • FlashAttention 2 — The standard for RTX 30/40/50 and A100: exact attention without the memory cost of long contexts.
  • torch.compile2.15.0from October 28, 2026new release

    10–30% for free

    Compiles the model for your GPU. Slower first run, faster afterwards.

    How to enable: model = torch.compile(model); in ComfyUI the TorchCompileModel node.

Model family

New posts about versions of PiVo-1.4M (quants, finetunes, LoRAs) will show up under the bell.

Quantised versions 1All on Hugging Face

About the model

empero-ai/PiVo-1.4M
Author
empero-ai
Category
Audio
Released
Posted

On NeyroLearn

Hugging Face

041

Ask AI about this model

Answered by Gemini 4 · the chat is kept only in this tab

Comments