Skip to content
Robotics

QiYuan1127 PiPER ACT

компактный чекпоинт для робота PiPER

2 min read

Это LeRobot 0.6.1 policy checkpoint от echoma1127 для задачи «взять красный куб и положить его в чёрный квадрат слева на столе». В основе ACT с backbone ResNet-18, инициализированным весами ImageNet; размер — около 0.05B параметров. Обучение шло на 52 локальных эпизодах, но датасет с моделью не опубликован.

Ключевые особенности

  • Входы: две RGB-камеры observation.images.global и observation.images.wrist (640×480 до препроцессинга) и observation.state из 7 значений.
  • Выход: абсолютные цели для шести суставов руки в градусах и раскрытие гриппера в метрах.
  • Сохранённые policy chunk size и n_action_steps равны 100; в выбранном deployment-профиле используется 30 шагов со сглаживанием alpha 0.7 и сессией по умолчанию 30 секунд.
  • Чекпоинт весит 206 707 932 байта; все семь файлов чекпоинта должны лежать вместе, а processor safetensors не взаимозаменяемы между чекпоинтами.

Пример

Сценарий из карточки: робот PiPER получает изображения с global- и wrist-камер и текущее состояние, после чего предсказывает позиции шести суставов и раскрытие гриппера, чтобы взять красный куб и положить его в чёрный квадрат слева. Перед инференсом нужно настроить локальные пути: исторические пути в конфиге обучения описывают provenance, а не готовое окружение.

ПодробнееОбучение: 20 000 шагов, 52 эпизода, 20 488 кадров при 20 Hz; held-out оценка success rate не приводится.
Историческая пользовательская успешность не является измеренным success rate; заявлений об общей робототехнической производительности нет.
Ограничения: не опубликован полный датасет, есть ограничения раскрытия/установки гриппера; отдельная open-source лицензия для чекпоинта не назначена.
Скачивание не запускает робота и не разрешает физическое движение.
Discuss Telegram 0 22

Will it run?

Runs in F32

Fits without quantisation.

  • F32weights 0.2 GB · ready files0.7 GB
  • BF16weights 0.1 GB0.6 GB
  • FP8 / INT8recommendedweights 0.0 GB0.6 GB
  • 4-bitweights 0.0 GB0.5 GB

Tip: go 8-bit.FP8 / INT8 is within about a percent of full precision in quality, takes half the memory and runs faster on RTX 40/50 and H100. Full precision only pays off for fine-tuning.

What to get for this model

Massed ComputeOpen Massed Compute

Your own GPU: FP8 / INT8 — from RTX 2060 · F32 — from RTX 2060

Massed Compute hourly prices, November 2026. The discounted price applies with the coupon at checkout.

Estimate: weights plus working memory. Long videos, high resolutions and long contexts need more.

Run it on Massed Compute

The script downloads the model to the rented machine. How to run it is in the model card.

  1. 1. Rent a machine with a fitting GPU

    Open Massed Compute
  2. 2. Paste the script into the machine's terminal

    Connect over SSH (the Massed Compute panel shows the command) or open a terminal on the machine's desktop.

    HF_TOKEN / CIVITAI_TOKENThe script starts with token lines: paste yours between the quotes. The Hugging Face token is for gated models, the Civitai one for Civitai models.

    # echoma1127/QiYuan1127-PiPER-ACT-020000
    mkdir -p ~/models
    curl -LsSf https://astral.sh/uv/install.sh | sh
    source "$HOME/.local/bin/env"
    uv tool install "huggingface_hub[cli]"
    hf download echoma1127/QiYuan1127-PiPER-ACT-020000 --local-dir ~/models/QiYuan1127-PiPER-ACT-020000
    # The model is in ~/models. How to run it is in the model card (link above).
  3. 3. Use it

    The model is in ~/models. How to run it is in the model card (link above).

Stop the machine in the panel when you are done: it bills by the minute while it runs.

How to speed it up

Picked for this model type. Choose your hardware above to see what fits you exactly.

  • FlashAttention 44.0.0b40from November 18, 2026new release

    fastest exact attention on B200

    Kernels for Blackwell (beta). Exact attention without quantisation — fine for everything, LLMs included.

    How to enable: pip install flash-attn-4; vLLM and SGLang pick it up themselves.

    Earlier generations (2)
    • FlashAttention 3 — The Hopper (H100/H200) version with FP8.
    • FlashAttention 2 — The standard for RTX 30/40/50 and A100: exact attention without the memory cost of long contexts.
  • torch.compile2.15.0from October 28, 2026new release

    10–30% for free

    Compiles the model for your GPU. Slower first run, faster afterwards.

    How to enable: model = torch.compile(model); in ComfyUI the TorchCompileModel node.

Model family

New posts about versions of QiYuan1127-PiPER-ACT-020000 (quants, finetunes, LoRAs) will show up under the bell.

No known relatives of this model yet. All derivatives on Hugging Face

About the model

echoma1127/QiYuan1127-PiPER-ACT-020000
Author
echoma1127
Category
Robotics
Released
Posted

On NeyroLearn

Hugging Face

220

Ask AI about this model

Answered by Gemini 4 · the chat is kept only in this tab

Comments