Skip to content
Other

ALADDIN detector

детектор face swap от Sumsub

1 min read

Бинарный классификатор, который отличает face swap, сделанный моделью ALADDIN — one-step face-swapping методом. Sumsub выложил детектор открыто, чтобы сгенерированные их методом изображения можно было распознавать; веса самого генератора доступны только через gated access. Архитектура — ConvNeXt-Tiny на 28M параметров, инициализирована из timm convnext_tiny.fb_in22k_ft_in1k, на выходе один логит.

Ключевые особенности

  • Заточен именно под ALADDIN, а не под универсальный deepfake-детекшн.
  • ConvNeXt-Tiny, 28M параметров, один логит; sigmoid(logit) — вероятность ALADDIN swap.
  • На входе 512×512 RGB, FFHQ-style aligned face crop; изображения другого размера ресайзятся билинейно до 512.
  • Есть CLI infer.py: можно считать папки с выровненными кропами или обычные фото с --align.
  • Другие генераторы и постобработка нейросетевыми enhancer'ами (GPEN, CodeFormer) не тестировались.
  • Лицензия CC BY-NC-SA 4.0, как у FFHQ, использованного для обучения.

Пример

import timm, torch
from PIL import Image

model = timm.create_model("hf-hub:Sumsub/aladdin-detector", pretrained=True).eval()
transform = timm.data.create_transform(**timm.data.resolve_data_config({}, model=model))
x = transform(Image.open("face.png").convert("RGB")).unsqueeze(0)
p_swap = torch.sigmoid(model(x)).item()  # > 0.5 — ALADDIN swap
ПодробнееБенчмарков в карточке нет. Модель на 28M параметров; требований к VRAM не указано.
Детектор только для ALADDIN: другие генераторы и постобработка GPEN/CodeFormer не тестировались.
Назначение — исследования и помощь модерации синтетики; не единственное доказательство о человеке или изображении.
Лицензия CC BY-NC-SA 4.0.
Discuss Telegram 0 12

Will it run?

Runs in F32

Fits without quantisation.

  • F32weights 0.1 GB · ready files0.6 GB
  • BF16weights 0.1 GB0.6 GB
  • FP8 / INT8recommendedweights 0.0 GB0.5 GB
  • 4-bitweights 0.0 GB0.5 GB

Tip: go 8-bit.FP8 / INT8 is within about a percent of full precision in quality, takes half the memory and runs faster on RTX 40/50 and H100. Full precision only pays off for fine-tuning.

What to get for this model

Massed ComputeOpen Massed Compute

Your own GPU: FP8 / INT8 — from RTX 2060 · F32 — from RTX 2060

Massed Compute hourly prices, November 2026. The discounted price applies with the coupon at checkout.

Estimate: weights plus working memory. Long videos, high resolutions and long contexts need more.

Run it on Massed Compute

The script downloads the model to the rented machine. How to run it is in the model card.

  1. 1. Rent a machine with a fitting GPU

    Open Massed Compute
  2. 2. Paste the script into the machine's terminal

    Connect over SSH (the Massed Compute panel shows the command) or open a terminal on the machine's desktop.

    HF_TOKEN / CIVITAI_TOKENThe script starts with token lines: paste yours between the quotes. The Hugging Face token is for gated models, the Civitai one for Civitai models.

    # Sumsub/aladdin-detector
    mkdir -p ~/models
    curl -LsSf https://astral.sh/uv/install.sh | sh
    source "$HOME/.local/bin/env"
    uv tool install "huggingface_hub[cli]"
    hf download Sumsub/aladdin-detector --local-dir ~/models/aladdin-detector
    # The model is in ~/models. How to run it is in the model card (link above).
    Add more LoRAs to aladdin-detector
  3. 3. Use it

    The model is in ~/models. How to run it is in the model card (link above).

Stop the machine in the panel when you are done: it bills by the minute while it runs.

How to speed it up

Picked for this model type. Choose your hardware above to see what fits you exactly.

  • FlashAttention 44.0.0b40from November 18, 2026new release

    fastest exact attention on B200

    Kernels for Blackwell (beta). Exact attention without quantisation — fine for everything, LLMs included.

    How to enable: pip install flash-attn-4; vLLM and SGLang pick it up themselves.

    Earlier generations (2)
    • FlashAttention 3 — The Hopper (H100/H200) version with FP8.
    • FlashAttention 2 — The standard for RTX 30/40/50 and A100: exact attention without the memory cost of long contexts.
  • torch.compile2.15.0from October 28, 2026new release

    10–30% for free

    Compiles the model for your GPU. Slower first run, faster afterwards.

    How to enable: model = torch.compile(model); in ComfyUI the TorchCompileModel node.

Model family

New posts about versions of aladdin-detector (quants, finetunes, LoRAs) will show up under the bell.

No known relatives of this model yet. All derivatives on Hugging Face

About the model

Sumsub/aladdin-detector
Author
Sumsub
Category
Other
Released
Posted

On NeyroLearn

Hugging Face

120

Ask AI about this model

Answered by Gemini 4 · the chat is kept only in this tab

Comments