Skip to content
Robotics

ACT enter_key v2

робот учится нажимать Enter

1 min readupdated

Это политика Action Chunking with Transformers (ACT) для имитационного обучения робота: она предсказывает короткие чанки действий, а не отдельные шаги. Модель на 0.05B параметров обучена через LeRobot для робота so_follower с фронтальной камерой и задачей «Press the enter key».

Ключевые особенности

  • Вход: состояние (6,) и изображение (3, 480, 640); выход — действие (6,).
  • Обучена на 100 эпизодах датасета enter_key_v2: 27 347 кадров при 30 FPS.
  • 20 000 шагов обучения, batch size 8, оптимизатор AdamW, learning rate 1e-5.
  • Используется LeRobot 0.6.2; политику можно запустить на своём роботе или дообучить.
  • Указан тип робота so_follower и одна фронтальная камера.

Пример

lerobot-rollout --strategy.type=base --robot.type=so_follower --robot.port=<your_robot_port> --policy.path=ronanl0201/act_enter_key_v2 --task="Press the enter key" --duration=60

Порт и параметры камер нужно заменить на свои; имена камер должны совпадать с ключами наблюдений, на которых обучалась политика.

ПодробнееОценки на реальном роботе в карточке нет.
Лицензия не указана; размер — 0.05B параметров.
Обучение: 20 000 шагов, batch 8, AdamW, lr 1e-5, LeRobot 0.6.2.
Discuss Telegram 0 22

Will it run?

Runs in F32

Fits without quantisation.

  • F32weights 0.2 GB · ready files0.7 GB
  • BF16weights 0.1 GB0.6 GB
  • FP8 / INT8recommendedweights 0.0 GB0.6 GB
  • 4-bitweights 0.0 GB0.5 GB

Tip: go 8-bit.FP8 / INT8 is within about a percent of full precision in quality, takes half the memory and runs faster on RTX 40/50 and H100. Full precision only pays off for fine-tuning.

What to get for this model

Massed ComputeOpen Massed Compute

Your own GPU: FP8 / INT8 — from RTX 2060 · F32 — from RTX 2060

Massed Compute hourly prices, November 2026. The discounted price applies with the coupon at checkout.

Estimate: weights plus working memory. Long videos, high resolutions and long contexts need more.

Run it on Massed Compute

The script downloads the model to the rented machine. How to run it is in the model card.

  1. 1. Rent a machine with a fitting GPU

    Open Massed Compute
  2. 2. Paste the script into the machine's terminal

    Connect over SSH (the Massed Compute panel shows the command) or open a terminal on the machine's desktop.

    HF_TOKEN / CIVITAI_TOKENThe script starts with token lines: paste yours between the quotes. The Hugging Face token is for gated models, the Civitai one for Civitai models.

    # ronanl0201/act_enter_key_v2
    mkdir -p ~/models
    curl -LsSf https://astral.sh/uv/install.sh | sh
    source "$HOME/.local/bin/env"
    uv tool install "huggingface_hub[cli]"
    hf download ronanl0201/act_enter_key_v2 --local-dir ~/models/act_enter_key_v2
    # The model is in ~/models. How to run it is in the model card (link above).
    Add more LoRAs to act_enter_key_v2
  3. 3. Use it

    The model is in ~/models. How to run it is in the model card (link above).

Stop the machine in the panel when you are done: it bills by the minute while it runs.

How to speed it up

Picked for this model type. Choose your hardware above to see what fits you exactly.

  • FlashAttention 44.0.0b40from November 18, 2026new release

    fastest exact attention on B200

    Kernels for Blackwell (beta). Exact attention without quantisation — fine for everything, LLMs included.

    How to enable: pip install flash-attn-4; vLLM and SGLang pick it up themselves.

    Earlier generations (2)
    • FlashAttention 3 — The Hopper (H100/H200) version with FP8.
    • FlashAttention 2 — The standard for RTX 30/40/50 and A100: exact attention without the memory cost of long contexts.
  • torch.compile2.15.0from October 28, 2026new release

    10–30% for free

    Compiles the model for your GPU. Slower first run, faster afterwards.

    How to enable: model = torch.compile(model); in ComfyUI the TorchCompileModel node.

Model family

New posts about versions of act_enter_key_v2 (quants, finetunes, LoRAs) will show up under the bell.

No known relatives of this model yet. All derivatives on Hugging Face

About the model

ronanl0201/act_enter_key_v2
Author
ronanl0201
Category
Robotics
Released
Posted

On NeyroLearn

Hugging Face

220

Ask AI about this model

Answered by Gemini 4 · the chat is kept only in this tab

Comments