Skip to content
Language models

Qwen2.5-Coder-7B-Instruct-GGUF

локальная LLM для генерации и исправления кода

2 min readupdated

Официальная сборка специализированной языковой модели от команды Qwen для программирования в формате GGUF (формат сжатых файлов для быстрого запуска нейросетей на обычных компьютерах и видеокартах через llama.cpp). Она умеет писать новый код, анализировать логику программ и находить в них ошибки, при этом сохраняя сильные навыки в математике и общих задачах. Модель основана на архитектуре Qwen2.5 с 7.61B параметров, обучена на 5.5 триллиона токенов исходного кода и синтетических данных и прошла дообучение для работы в режиме инструкций (Instruct). В отличие от тяжёлых облачных моделей, эта версия оптимизирована для локального запуска с разной степенью квантования (сжатия весов для экономии памяти). Пригодится разработчикам, которым нужен быстрый и приватный ИИ-помощник для написания скриптов, отладки и создания автономных кодовых агентов.

Ключевые особенности

  • Построена на базе Qwen2.5-Coder (7.61B параметров) с улучшенными навыками генерации, анализа и исправления кода.
  • Доступны готовые варианты квантования от q2_K до q8_0 для гибкой настройки под объём доступной памяти.
  • Поддерживает окно контекста до 32 768 токенов в данной GGUF-сборке.
  • Поставляется в удобном формате GGUF для прямого запуска через движок llama.cpp.

Что можно сделать

  • Развернуть локального ассистента программиста через llama-cli для диалоговой генерации и рефакторинга кода без отправки данных в облако.
  • Использовать в качестве базовой модели для локальных Code Agents (автономных агентов, которые сами пишут и проверяют код) и решения математических задач.
  • Подобрать оптимальный баланс между скоростью и качеством ответов, выбрав нужный уровень сжатия (например, q4_K_M или q5_K_M) под своё железо.

Пример

./llama-cli -m  \
    -co -cnv -p "You are Qwen, created by Alibaba Cloud. You are a helpful assistant." \
    -fa -ngl 80 -n 512
ПодробнееАрхитектура: transformers с RoPE, SwiGLU, RMSNorm и Attention QKV bias (28 слоёв, GQA: 28 голов для Q и 4 для KV).
Параметры: всего 7.61B (6.53B без учёта эмбеддингов).
Ограничения контекста: в GGUF поддерживается до 32 768 токенов (расширение до 131 072 токенов через YARN доступно только в не-GGUF версиях для vLLM).
Особенности загрузки: крупные файлы разделены на части (например, 00001-of-00002) и перед запуском требуют склейки утилитой llama-gguf-split.
Discuss 678 480.9K

Will it run?

Runs in GGUF Q8_0

The most precise of the ready quantised files fits.

  • GGUF Q8_0recommendedweights 15 GB · ready files17 GB
  • GGUF Q6_Kweights 12 GB · ready files13 GB
  • GGUF Q5_K_Mweights 10 GB · ready files12 GB
  • GGUF Q4_K_Mweights 8.7 GB · ready files10 GB
  • GGUF Q4_0weights 8.3 GB · ready files9.7 GB
  • GGUF Q5_0weights 5.0 GB · ready files6.0 GB
  • GGUF Q3_K_Mweights 3.5 GB · ready files4.5 GB
  • GGUF Q2_Kweights 2.8 GB · ready files3.7 GB

Tip: go 8-bit.GGUF Q8_0 is within about a percent of full precision in quality, takes half the memory and runs faster on RTX 40/50 and H100. Full precision only pays off for fine-tuning.

What to get for this model

Massed ComputeOpen Massed Compute

Your own GPU: GGUF Q8_0 — from RTX 4090

Massed Compute hourly prices, November 2026. The discounted price applies with the coupon at checkout.

Estimate: weights plus working memory. Long videos, high resolutions and long contexts need more.

Run it on Massed Compute

A ready script for the machine we advise above: paste it and the model downloads and starts.

  1. 1. Rent A30

    $0.26 an hour with the coupon. Pick the Ubuntu image when you create the machine.

    Open Massed Compute
  2. 2. Paste the script into the machine's terminal

    Connect over SSH (the Massed Compute panel shows the command) or open a terminal on the machine's desktop.

    HF_TOKEN / CIVITAI_TOKENThe script starts with token lines: paste yours between the quotes. The Hugging Face token is for gated models, the Civitai one for Civitai models.

    # Qwen/Qwen2.5-Coder-7B-Instruct-GGUF — A30, GGUF Q8_0
    # NVIDIA driver: CUDA 13 needs 580+. If older or missing, the current nvidia-open is installed (keep yours: KEEP_DRIVER=1)
    DRV=$(nvidia-smi --query-gpu=driver_version --format=csv,noheader 2>/dev/null | head -1 | cut -d. -f1)
    case "$DRV" in ""|*[!0-9]*) DRV=0 ;; esac
    if [ "$DRV" -lt 580 ] && [ -z "${KEEP_DRIVER:-}" ]; then
      . /etc/os-release && \
      curl -fsSLO "https://developer.download.nvidia.com/compute/cuda/repos/ubuntu${VERSION_ID//./}/x86_64/cuda-keyring_1.1-1_all.deb" && \
      sudo dpkg -i cuda-keyring_1.1-1_all.deb && rm -f cuda-keyring_1.1-1_all.deb && \
      sudo apt-get update && \
      sudo DEBIAN_FRONTEND=noninteractive apt-get install -y nvidia-open || \
      { echo "Could not install the NVIDIA driver: see the error above. To keep the current one, run with KEEP_DRIVER=1."; exit 1; }
      echo "NVIDIA driver updated. Reboot the machine (sudo reboot) and run this same script again."
      exit 0
    fi
    curl -fsSL https://ollama.com/install.sh | sh
    ollama run hf.co/Qwen/Qwen2.5-Coder-7B-Instruct-GGUF:Q8_0
  3. 3. Use it

    The chat opens right in the terminal. Leave with /bye, start again with the same ollama run command.

Stop the machine in the panel when you are done: it bills by the minute while it runs.

How to speed it up

Picked for this model type. Choose your hardware above to see what fits you exactly.

  • FlashAttention 44.0.0b40from November 18, 2026new release

    fastest exact attention on B200

    Kernels for Blackwell (beta). Exact attention without quantisation — fine for everything, LLMs included.

    How to enable: pip install flash-attn-4; vLLM and SGLang pick it up themselves.

    Earlier generations (2)
    • FlashAttention 3 — The Hopper (H100/H200) version with FP8.
    • FlashAttention 2 — The standard for RTX 30/40/50 and A100: exact attention without the memory cost of long contexts.
  • torch.compile2.15.0from October 28, 2026new release

    10–30% for free

    Compiles the model for your GPU. Slower first run, faster afterwards.

    How to enable: model = torch.compile(model); in ComfyUI the TorchCompileModel node.

  • MTP (multi-token prediction)0.34.0from November 16, 2026new release

    1.5–2× generation speed

    If the model has MTP layers (DeepSeek-V3/R1, Qwen3-Next, GLM, MiMo and others), it predicts several tokens per step itself.

    How to enable: vLLM / SGLang: --speculative-config '{"method": "mtp", "num_speculative_tokens": 1}'. Check the model card.

    Earlier generations (2)
    • EAGLE-3 — Speculative decoding with a small draft head. For models without their own MTP layers.
    • EAGLE-2 / Medusa — Earlier draft-head generations. Still work if that is all you find.
  • FP8 KV cache0.34.0from November 16, 2026new release

    2× more context in the same memory

    Keeps the attention cache in 8 bits, so long contexts fit where they did not.

    How to enable: vLLM: --kv-cache-dtype fp8; llama.cpp: -ctk q8_0 -ctv q8_0.

  • vLLM / SGLang0.34.0from November 16, 2026new release

    many times more tokens/s on a server

    Server engines: batching, FlashAttention, FP8 and speculative decoding out of the box.

    How to enable: vllm serve <model> — an OpenAI-compatible API.

    Earlier generations (1)
    • llama.cpp — GGUF models on any GPU, Mac or even CPU; some layers can stay in RAM.

Model family

  1. Qwen2.5-7Bfamily root
  2. Qwen2.5-Coder-7B
  3. Qwen2.5-Coder-7B-Instruct
  4. Qwen2.5-Coder-7B-Instruct-GGUF

New posts about versions of Qwen2.5-7B (quants, finetunes, LoRAs) will show up under the bell.

Quantised versions 12All on Hugging Face
Fine-tunes 12All on Hugging Face
LoRAs and adapters 1All on Hugging Face
Merges 5All on Hugging Face

About the model

Qwen/Qwen2.5-Coder-7B-Instruct-GGUF
Author
Qwen
Category
Language models
Released
Posted

On NeyroLearn

Hugging Face

480.9K678

Ask AI about this model

Answered by Gemini 4 · the chat is kept only in this tab

Comments