Skip to content
Other

OrdoPy-Coder-0.5B-GGUF

локальные кванты компактной модели для кода

2 min readupdated

Автор mradermacher выложил статические квантованные версии (GGUF) модели layer8labs8/OrdoPy-Coder-0.5B. Это сверхлёгкая модель для генерации и работы с кодом размером около 0,5 млрд параметров, сжатая в разные уровни точности для локального запуска на обычных ПК и ноутбуках без мощных видеокарт. В релизе собрано 12 вариантов — от экстремально сжатых 0,4 ГБ до почти нетронутого f16 на 1,1 ГБ. Подойдёт разработчикам, которым нужен быстрый локальный автокомплит или ассистент для простых скриптов при минимальном расходе памяти.

Ключевые особенности

  • 12 статических GGUF-файлов в одном репозитории: от Q2_K и Q3_K_S до Q8_0 и f16.
  • Рекомендуемые для баланса скорости и качества версии Q4_K_S и Q4_K_M занимают всего 0,5 ГБ.
  • Варианты Q6_K и Q8_0 весят по 0,6 ГБ и сохраняют максимальную точность при высокой скорости работы.
  • В подборке есть IQ4_XS (0,5 ГБ) — формат, который обычно точнее стандартных квантов сопоставимого размера.

Что можно сделать

  • Подключить Q4_K_M или Q8_0 в локальных клиентах вроде llama.cpp, LM Studio или Ollama для быстрого автодополнения и генерации кода.
  • Запускать на слабых ноутбуках, одноплатниках или в фоне параллельно с IDE, не занимая много оперативной памяти и VRAM.
  • Сравнить качество генерации между ультралёгким Q3_K_S (0,4 ГБ) и почти полным Q8_0 (0,6 ГБ) на своих задачах.

Пример

В карточке нет готового сниппета кода — выберите подходящий файл из таблицы квантов (например, OrdoPy-Coder-0.5B.Q4_K_M.gguf или OrdoPy-Coder-0.5B.Q8_0.gguf) и загрузите его в любой инструмент с поддержкой формата GGUF (llama.cpp, LM Studio и аналоги).

ПодробнееБазовая модель: layer8labs8/OrdoPy-Coder-0.5B (язык: en)
Размер файлов: от 0,4 ГБ (Q2_K, Q3_K_S) до 1,1 ГБ (f16)
Ограничения: доступны только статические кванты, версии weighted/imatrix на момент публикации отсутствуют
Метрики и бенчмарки в карточке не приведены
Discuss Telegram 0 312

Will it run?

Runs in GGUF F16

The most precise of the ready quantised files fits.

  • GGUF F16weights 0.9 GB · ready files1.5 GB
  • GGUF Q8_0recommendedweights 0.5 GB · ready files1.0 GB
  • GGUF Q6_Kweights 0.5 GB · ready files1.0 GB
  • GGUF Q5_K_Mweights 0.4 GB · ready files0.9 GB
  • GGUF Q5_K_Sweights 0.4 GB · ready files0.9 GB
  • GGUF Q4_K_Mweights 0.4 GB · ready files0.9 GB
  • GGUF Q4_K_Sweights 0.4 GB · ready files0.9 GB
  • GGUF Q3_K_Lweights 0.3 GB · ready files0.9 GB
  • GGUF Q3_K_Mweights 0.3 GB · ready files0.9 GB
  • GGUF IQ4_XSweights 0.3 GB · ready files0.9 GB
  • GGUF Q2_Kweights 0.3 GB · ready files0.8 GB
  • GGUF Q3_K_Sweights 0.3 GB · ready files0.8 GB

Tip: go 8-bit.GGUF Q8_0 is within about a percent of full precision in quality, takes half the memory and runs faster on RTX 40/50 and H100. Full precision only pays off for fine-tuning.

What to get for this model

Massed ComputeOpen Massed Compute

Your own GPU: GGUF Q8_0 — from RTX 2060 · GGUF F16 — from RTX 2060

Massed Compute hourly prices, November 2026. The discounted price applies with the coupon at checkout.

Estimate: weights plus working memory. Long videos, high resolutions and long contexts need more.

Run it on Massed Compute

The script downloads the model to the rented machine. How to run it is in the model card.

  1. 1. Rent a machine with a fitting GPU

    Open Massed Compute
  2. 2. Paste the script into the machine's terminal

    Connect over SSH (the Massed Compute panel shows the command) or open a terminal on the machine's desktop.

    HF_TOKEN / CIVITAI_TOKENThe script starts with token lines: paste yours between the quotes. The Hugging Face token is for gated models, the Civitai one for Civitai models.

    # mradermacher/OrdoPy-Coder-0.5B-GGUF
    mkdir -p ~/models
    curl -LsSf https://astral.sh/uv/install.sh | sh
    source "$HOME/.local/bin/env"
    uv tool install "huggingface_hub[cli]"
    hf download mradermacher/OrdoPy-Coder-0.5B-GGUF --local-dir ~/models/OrdoPy-Coder-0.5B-GGUF
    # The model is in ~/models. How to run it is in the model card (link above).
    Add more LoRAs to OrdoPy-Coder-0.5B-GGUF
  3. 3. Use it

    The model is in ~/models. How to run it is in the model card (link above).

Stop the machine in the panel when you are done: it bills by the minute while it runs.

How to speed it up

Picked for this model type. Choose your hardware above to see what fits you exactly.

  • FlashAttention 44.0.0b40from November 18, 2026new release

    fastest exact attention on B200

    Kernels for Blackwell (beta). Exact attention without quantisation — fine for everything, LLMs included.

    How to enable: pip install flash-attn-4; vLLM and SGLang pick it up themselves.

    Earlier generations (2)
    • FlashAttention 3 — The Hopper (H100/H200) version with FP8.
    • FlashAttention 2 — The standard for RTX 30/40/50 and A100: exact attention without the memory cost of long contexts.
  • torch.compile2.15.0from October 28, 2026new release

    10–30% for free

    Compiles the model for your GPU. Slower first run, faster afterwards.

    How to enable: model = torch.compile(model); in ComfyUI the TorchCompileModel node.

Model family

  1. Qwen2.5-0.5Bfamily root
  2. Qwen2.5-Coder-0.5B
  3. Qwen2.5-Coder-0.5B-Instruct
  4. OrdoPy-Coder-0.5B
  5. OrdoPy-Coder-0.5B-GGUF

New posts about versions of Qwen2.5-0.5B (quants, finetunes, LoRAs) will show up under the bell.

Quantised versions 12All on Hugging Face
Fine-tunes 12All on Hugging Face
LoRAs and adapters 5All on Hugging Face
Merges 2All on Hugging Face

About the model

mradermacher/OrdoPy-Coder-0.5B-GGUF
Author
mradermacher
Category
Other
Released
Posted

On NeyroLearn

Hugging Face

3120

Ask AI about this model

Answered by Gemini 4 · the chat is kept only in this tab

Comments