Skip to content
Images

DA-Flow: Degradation-aware optical flow model

1 min readupdated

DA-Flow provides pretrained weights for optical flow estimation using image restoration diffusion features. Based on stabilityai/stable-diffusion-3.5-medium, the model integrates a DiT4SR transformer and a dedicated network structure for flow processing. It enables more accurate motion estimation on damaged, noisy, or blurry frames by leveraging the capabilities of the diffusion model. This tool is designed for researchers and developers working in computer vision and video processing.

Key features

  • Uses diffusion restoration features from Stable Diffusion 3.5 Medium
  • Includes a dedicated DiT4SR transformer for the initial stage
  • Built for handling complex image degradation conditions
  • Based on open research and the official code repository

What you can do

  • Run optical flow estimation for noisy or blurry frame sequences
  • Experiment with motion visualization using diffusion features
  • Integrate the model into video processing pipelines alongside SD3.5 Medium components

Example

Model usage is documented in the official GitHub repository, which loads the transformer/ and daflow_flow.pth weights along with the VAE and scheduler from Stable Diffusion 3.5 Medium.

Read moreDetails
Base model: stabilityai/stable-diffusion-3.5-medium
Parameters: 2.94B
Library: diffusers
Components: transformer/ and daflow_flow.pth
Discuss Telegram 0

Will it run?

Runs in F16

Fits without quantisation.

  • F16weights 7.4 GB · ready files9.7 GB
  • FP8 / INT8recommendedweights 2.7 GB4.5 GB
  • 4-bitweights 1.5 GB3.2 GB

Tip: go 8-bit.FP8 / INT8 is within about a percent of full precision in quality, takes half the memory and runs faster on RTX 40/50 and H100. Full precision only pays off for fine-tuning.

What to get for this model

Massed ComputeOpen Massed Compute

Your own GPU: FP8 / INT8 — from RTX 2060 · F16 — from RTX 3080

Massed Compute hourly prices, November 2026. The discounted price applies with the coupon at checkout.

Estimate: weights plus working memory. Long videos, high resolutions and long contexts need more.

Run it on Massed Compute

The script downloads the model to the rented machine. How to run it is in the model card.

  1. 1. Rent a machine with a fitting GPU

    Open Massed Compute
  2. 2. Paste the script into the machine's terminal

    Connect over SSH (the Massed Compute panel shows the command) or open a terminal on the machine's desktop.

    HF_TOKEN / CIVITAI_TOKENThe script starts with token lines: paste yours between the quotes. The Hugging Face token is for gated models, the Civitai one for Civitai models.

    # Min-Jaewon/DA-Flow
    mkdir -p ~/models
    curl -LsSf https://astral.sh/uv/install.sh | sh
    source "$HOME/.local/bin/env"
    uv tool install "huggingface_hub[cli]"
    hf download Min-Jaewon/DA-Flow --local-dir ~/models/DA-Flow
    # The model is in ~/models. How to run it is in the model card (link above).
    Add more LoRAs to DA-Flow
  3. 3. Use it

    The model is in ~/models. How to run it is in the model card (link above).

Stop the machine in the panel when you are done: it bills by the minute while it runs.

How to speed it up

Picked for this model type. Choose your hardware above to see what fits you exactly.

  • SageAttention 3v2.2.0from October 28, 2025

    even faster on RTX 50 / Blackwell

    FP4 attention for Blackwell. Faster than SageAttention 2, but the authors suggest v2 when accuracy matters.

    How to enable: Build from the sageattention3_blackwell folder of the repo; in ComfyUI via KJNodes.

    Earlier generations (2)
    • SageAttention 2++ — Quantised (INT8/FP8) attention with no visible quality loss. The main speed-up for image and video generation.
    • SageAttention 1 — First version: INT8 for Q·K. Still works, but 2++ is faster and more accurate.
  • FlashAttention 44.0.0b40from November 18, 2026new release

    fastest exact attention on B200

    Kernels for Blackwell (beta). Exact attention without quantisation — fine for everything, LLMs included.

    How to enable: pip install flash-attn-4; vLLM and SGLang pick it up themselves.

    Earlier generations (3)
    • FlashAttention 3 — The Hopper (H100/H200) version with FP8.
    • FlashAttention 2 — The standard for RTX 30/40/50 and A100: exact attention without the memory cost of long contexts.
    • xFormers — The older way to speed up attention, works almost everywhere. Sage or Flash are faster where available.
  • cache-dit (DBCache)v1.5.6from November 20, 2026new release

    1.5–3× at nearly the same quality

    Reuses block outputs between diffusion steps. Supports most DiT models.

    How to enable: pip install cache-dit; one line cache_dit.enable_cache(pipe) for diffusers.

    Earlier generations (2)
    • MagCache — Skips steps by magnitude of change. More accurate than TeaCache, no calibration.
    • TeaCache — The first popular diffusion step cache. Works, newer methods are more accurate.
  • Nunchaku (SVDQuant 4-bit)v1.2.1from January 25, 2026

    ≈3× faster and 3.5× less memory

    4-bit versions of popular image models with almost no quality loss (FP4 on RTX 50).

    How to enable: Ready weights for supported models; in ComfyUI use ComfyUI-nunchaku.

  • torch.compile2.15.0from October 28, 2026new release

    10–30% for free

    Compiles the model for your GPU. Slower first run, faster afterwards.

    How to enable: model = torch.compile(model); in ComfyUI the TorchCompileModel node.

Model family

New posts about versions of stable-diffusion-3.5-medium (quants, finetunes, LoRAs) will show up under the bell.

Quantised versions 5All on Hugging Face
Fine-tunes 12All on Hugging Face
LoRAs and adapters 12All on Hugging Face

About the model

Min-Jaewon/DA-Flow
Author
Min-Jaewon
Category
Images
Released
Posted

On NeyroLearn

Hugging Face

00

Ask AI about this model

Answered by Gemini 4 · the chat is kept only in this tab

Comments

Images

RRSD

RRSD