Skip to content
Images

Diving-IllustriousAnime_Niji-Muted_Color-Real_VAE

аниме-чекпоинт с приглушённой палитрой и встроенным VAE

2 min readupdated

Модель генерирует изображения по текстовому описанию в стилистике японской иллюстрации (Niji) с мягкими приглушёнными тонами и добавлением реалистичных элементов. Чекпоинт построен на базе Illustrious-xl-early-release-v0 (архитектура SDXL) от автора DivingSuit и уже включает в себя VAE (декодер, отвечающий за чёткость деталей и правильную цветопередачу), поэтому подключать его отдельно не нужно. В отличие от базовой версии, модель уверенно справляется как с крупными планами, так и с генерацией персонажей в полный рост без обязательного использования дополнительных LoRA. Подойдёт художникам и энтузиастам, которые ищут сбалансированный аниме-стиль с поддержкой 18+ контента для некоммерческих проектов.

Ключевые особенности

  • Стиль японской иллюстрации: сочетает эстетику Niji, приглушённые цвета и лёгкие реалистичные акценты.
  • Встроенный VAE: не требует ручного выбора и подгрузки внешнего файла VAE при генерации.
  • Любые планы: корректно отрисовывает как портреты крупным планом, так и фигуры в полный рост.
  • Поддержка NSFW: модель подходит для генерации контента 18+ без жёстких ограничений.

Что можно сделать

  • Генерировать аниме-иллюстрации и концепт-арты персонажей в локальных интерфейсах вроде ComfyUI или Automatic1111 без поиска дополнительных стилевых LoRA.
  • Создавать портретные и ростовые арты с мягкой цветовой гаммой, используя стандартные промпты в стиле Pony и Illustrious.

Пример

Автор рекомендует использовать Euler a, DPM++ 2M или DPM++ SDE с планировщиком Karras (20–30 шагов, CFG 4–6, разрешение 896×1152). Триггер-слова не требуются, а в качестве базового негативного промпта предлагается: worst quality, low quality, normal quality, lowres, bad anatomy, bad hands, signature, watermarks, ugly, imperfect eyes, unnatural face, extra limb, missing limbs.

ПодробнееБазовая модель: OnomaAIResearch/Illustrious-xl-early-release-v0 (SDXL)
Рекомендуемые настройки: 20–30 шагов, CFG 4–6, ADetailer (face_yolov8s.pt)
Ограничения: продажа модели и коммерческое использование запрещены (только для личного творчества)
Discuss Telegram 0 35

Will it run?

Runs in BF16

Fits without quantisation.

  • BF16weights 6.5 GB · ready files8.6 GB
  • FP8 / INT8recommendedweights 3.2 GB5.1 GB
  • 4-bitweights 1.8 GB3.5 GB

Tip: go 8-bit.FP8 / INT8 is within about a percent of full precision in quality, takes half the memory and runs faster on RTX 40/50 and H100. Full precision only pays off for fine-tuning.

What to get for this model

Massed ComputeOpen Massed Compute

Your own GPU: FP8 / INT8 — from RTX 2060 · BF16 — from RTX 3080

Massed Compute hourly prices, November 2026. The discounted price applies with the coupon at checkout.

Estimate: weights plus working memory. Long videos, high resolutions and long contexts need more.

Run it on Massed Compute

The script downloads the model to the rented machine. How to run it is in the model card.

  1. 1. Rent a machine with a fitting GPU

    Open Massed Compute
  2. 2. Paste the script into the machine's terminal

    Connect over SSH (the Massed Compute panel shows the command) or open a terminal on the machine's desktop.

    HF_TOKEN / CIVITAI_TOKENThe script starts with token lines: paste yours between the quotes. The Hugging Face token is for gated models, the Civitai one for Civitai models.

    # LyliaEngine/Diving-IllustriousAnime_Niji-Muted_Color-Real_VAE
    mkdir -p ~/models
    curl -LsSf https://astral.sh/uv/install.sh | sh
    source "$HOME/.local/bin/env"
    uv tool install "huggingface_hub[cli]"
    hf download LyliaEngine/Diving-IllustriousAnime_Niji-Muted_Color-Real_VAE --local-dir ~/models/Diving-IllustriousAnime_Niji-Muted_Color-Real_VAE
    # The model is in ~/models. How to run it is in the model card (link above).
  3. 3. Use it

    The model is in ~/models. How to run it is in the model card (link above).

Stop the machine in the panel when you are done: it bills by the minute while it runs.

How to speed it up

Picked for this model type. Choose your hardware above to see what fits you exactly.

  • SageAttention 3v2.2.0from October 28, 2025

    even faster on RTX 50 / Blackwell

    FP4 attention for Blackwell. Faster than SageAttention 2, but the authors suggest v2 when accuracy matters.

    How to enable: Build from the sageattention3_blackwell folder of the repo; in ComfyUI via KJNodes.

    Earlier generations (2)
    • SageAttention 2++ — Quantised (INT8/FP8) attention with no visible quality loss. The main speed-up for image and video generation.
    • SageAttention 1 — First version: INT8 for Q·K. Still works, but 2++ is faster and more accurate.
  • FlashAttention 44.0.0b40from November 18, 2026new release

    fastest exact attention on B200

    Kernels for Blackwell (beta). Exact attention without quantisation — fine for everything, LLMs included.

    How to enable: pip install flash-attn-4; vLLM and SGLang pick it up themselves.

    Earlier generations (3)
    • FlashAttention 3 — The Hopper (H100/H200) version with FP8.
    • FlashAttention 2 — The standard for RTX 30/40/50 and A100: exact attention without the memory cost of long contexts.
    • xFormers — The older way to speed up attention, works almost everywhere. Sage or Flash are faster where available.
  • cache-dit (DBCache)v1.5.6from November 20, 2026new release

    1.5–3× at nearly the same quality

    Reuses block outputs between diffusion steps. Supports most DiT models.

    How to enable: pip install cache-dit; one line cache_dit.enable_cache(pipe) for diffusers.

    Earlier generations (2)
    • MagCache — Skips steps by magnitude of change. More accurate than TeaCache, no calibration.
    • TeaCache — The first popular diffusion step cache. Works, newer methods are more accurate.
  • Nunchaku (SVDQuant 4-bit)v1.2.1from January 25, 2026

    ≈3× faster and 3.5× less memory

    4-bit versions of popular image models with almost no quality loss (FP4 on RTX 50).

    How to enable: Ready weights for supported models; in ComfyUI use ComfyUI-nunchaku.

  • torch.compile2.15.0from October 28, 2026new release

    10–30% for free

    Compiles the model for your GPU. Slower first run, faster afterwards.

    How to enable: model = torch.compile(model); in ComfyUI the TorchCompileModel node.

Model family

  1. kohaku-xl-beta5family root
  2. Illustrious-xl-early-release-v0
  3. Diving-IllustriousAnime_Niji-Muted_Color-Real_VAE

New posts about versions of kohaku-xl-beta5 (quants, finetunes, LoRAs) will show up under the bell.

Quantised versions 1All on Hugging Face
Fine-tunes 7All on Hugging Face
Merges 7All on Hugging Face

About the model

LyliaEngine/Diving-IllustriousAnime_Niji-Muted_Color-Real_VAE
Author
LyliaEngine
Category
Images
Released
Posted

On NeyroLearn

Hugging Face

350

Ask AI about this model

Answered by Gemini 4 · the chat is kept only in this tab

Comments