Skip to content
Other

LaMa ONNX fp16

лёгкая версия модели для удаления объектов

2 min readupdated

Модель для инпейнтинга (заполнения вырезанных или скрытых областей на изображении) на базе архитектуры LaMa (big-lama), переведённая в формат ONNX с сохранением весов в формате float16. Вес файла уменьшен вдвое — до 106 МБ, при этом при загрузке веса автоматически приводятся обратно к float32, поэтому качество генерации практически не отличается от оригинала. Релиз подготовлен автором HiggityPiggity на основе экспорта Carve/LaMa-ONNX специально для локального запуска прямо в браузере пользователя без отправки данных на сервер. Подойдёт веб-разработчикам и создателям графических инструментов, которым нужно быстрое и лёгкое удаление объектов на стороне клиента.

Ключевые особенности

  • Размер файла lama_fp16w.onnx сокращён вдвое по сравнению с fp32-версией — около 106 МБ.
  • При загрузке модели веса конвертируются обратно в float32, сохраняя точность работы оригинального графа.
  • Полностью готова к локальному инференсу на устройстве пользователя, включая запуск внутри браузерных приложений.
  • Работает с фиксированным разрешением 512×512 пикселей и принимает на вход само изображение и бинарную маску.

Что можно сделать

  • Встроить в веб-приложение или браузерный фоторедактор для удаления лишних объектов и ретуши без затрат на серверные GPU.
  • Использовать для достройки фона за объектами при создании 3D-эффекта движения камеры на фотографиях (как в приложении Lantern).

Пример

Модель принимает два тензора формата float32 размером [1, 3, 512, 512] (исходное RGB-изображение в диапазоне 0–1, где пиксели под маской обнулены) и [1, 1, 512, 512] (маска: 1 — заполнить, 0 — оставить). На выходе возвращается тензор [1, 3, 512, 512] со значениями RGB в диапазоне 0–255.

ПодробнееТочность: при заполнении области в 35% кадра средняя абсолютная разница с оригинальной lama_fp32.onnx составляет всего 0.56 уровня (из 255), максимальная — 10.
Ограничения: 8-битное динамическое квантование для этой модели непригодно (средняя ошибка превышает 100 уровней).
В репозитории также приложен скрипт конвертации convert_fp16_weights.py.
Лицензия: Apache-2.0.
Discuss Telegram 0

Will it run?

Runs in BF16

Fits without quantisation.

  • BF16weights 0.1 GB · ready files0.6 GB
  • FP8 / INT8recommendedweights 0.0 GB0.6 GB
  • 4-bitweights 0.0 GB0.5 GB

Tip: go 8-bit.FP8 / INT8 is within about a percent of full precision in quality, takes half the memory and runs faster on RTX 40/50 and H100. Full precision only pays off for fine-tuning.

What to get for this model

Massed ComputeOpen Massed Compute

Your own GPU: FP8 / INT8 — from RTX 2060 · BF16 — from RTX 2060

Massed Compute hourly prices, November 2026. The discounted price applies with the coupon at checkout.

Estimate: weights plus working memory. Long videos, high resolutions and long contexts need more.

Run it on Massed Compute

The script downloads the model to the rented machine. How to run it is in the model card.

  1. 1. Rent a machine with a fitting GPU

    Open Massed Compute
  2. 2. Paste the script into the machine's terminal

    Connect over SSH (the Massed Compute panel shows the command) or open a terminal on the machine's desktop.

    HF_TOKEN / CIVITAI_TOKENThe script starts with token lines: paste yours between the quotes. The Hugging Face token is for gated models, the Civitai one for Civitai models.

    # HiggityPiggity/lama-onnx-fp16
    mkdir -p ~/models
    curl -LsSf https://astral.sh/uv/install.sh | sh
    source "$HOME/.local/bin/env"
    uv tool install "huggingface_hub[cli]"
    hf download HiggityPiggity/lama-onnx-fp16 --local-dir ~/models/lama-onnx-fp16
    # The model is in ~/models. How to run it is in the model card (link above).
    Add more LoRAs to lama-onnx-fp16
  3. 3. Use it

    The model is in ~/models. How to run it is in the model card (link above).

Stop the machine in the panel when you are done: it bills by the minute while it runs.

How to speed it up

Picked for this model type. Choose your hardware above to see what fits you exactly.

  • FlashAttention 44.0.0b40from November 18, 2026new release

    fastest exact attention on B200

    Kernels for Blackwell (beta). Exact attention without quantisation — fine for everything, LLMs included.

    How to enable: pip install flash-attn-4; vLLM and SGLang pick it up themselves.

    Earlier generations (2)
    • FlashAttention 3 — The Hopper (H100/H200) version with FP8.
    • FlashAttention 2 — The standard for RTX 30/40/50 and A100: exact attention without the memory cost of long contexts.
  • torch.compile2.15.0from October 28, 2026new release

    10–30% for free

    Compiles the model for your GPU. Slower first run, faster afterwards.

    How to enable: model = torch.compile(model); in ComfyUI the TorchCompileModel node.

Model family

New posts about versions of lama-onnx-fp16 (quants, finetunes, LoRAs) will show up under the bell.

No known relatives of this model yet. All derivatives on Hugging Face

About the model

HiggityPiggity/lama-onnx-fp16
Author
HiggityPiggity
Category
Other
Released
Posted

On NeyroLearn

Hugging Face

00

Ask AI about this model

Answered by Gemini 4 · the chat is kept only in this tab

Comments

Other

PFN-DiD

PFN-DiD