Skip to content
Other

Interlock Edge Comparator

компаратор краёв для автоматической сборки пазлов

2 min readupdated

Этот компаратор — часть Interlock, автоматического солвера пазлов. Он получает две детали и оценивает, насколько вероятно, что вторая является правой соседкой первой; поворотом проверяются остальные три направления. В отличие от базовой версии, модель обучена не ломаться, когда контуры деталей не идеальны — как у деталей, вырезанных из фотографии, — и сравнивает не только форму, но и изображение. Пригодится тем, кто делает или исследует автоматическую сборку пазлов и хочет заменить скорер соседства в своём пайплайне.

Ключевые особенности

  • Сравнивает две детали и выдаёт логит вероятности, что вторая — правая соседка первой; поворотом проверяются остальные направления.
  • Обучен на неточные контуры: сегментационные ошибки до 5% и шум, чтобы работать с деталями, вырезанными из фото.
  • Учитывает не только форму, но и картинку: часть ложных пар имеет точный контур, но другое содержимое.
  • Вход — окна шва (5, 184, 80) uint8: RGB плюс маски; выход — один логит на окно.
  • Калибровка: перед softmax логиты делят на T = 0.73.

Что можно сделать

  • Подключить к Interlock и собирать пазлы из синтетических разрезов реальных изображений.
  • Использовать как готовый скорер соседства в своём солвере: матрица (4, N, N) для четырёх направлений.
  • Проверять устойчивость пайплайна к шуму и неровным контурам на своих наборах.

Пример

from huggingface_hub import hf_hub_download
from interlock.models.edge_comparator import load_comparator, pick_device, score_matrix

model = load_comparator(hf_hub_download("dm157/interlock-edge-comparator", "edge_comparator.pt"), pick_device())
logits = score_matrix(model, pieces, masks)  # (4, N, N): right, below, left, above
ПодробнееНа тесте с неравномерной ошибкой контуров Top-1 вырос с 4,5% до 86,3%, а доля полностью собранных пазлов — с 0% до 91%.
Обучение: 1500 изображений SA-1B, 15 эпох, AdamW, lr до 0.001 на Apple Silicon MPS.
Ограничения: синтетические разрезы, не фото физических деталей; лицензия только для исследований и некоммерческого использования.
Discuss Telegram 1 11

Will it run?

Runs in BF16

Fits without quantisation.

  • BF16weights 0.0 GB · ready files0.5 GB
  • FP8 / INT8recommendedweights 0.0 GB0.5 GB
  • 4-bitweights 0.0 GB0.5 GB

Tip: go 8-bit.FP8 / INT8 is within about a percent of full precision in quality, takes half the memory and runs faster on RTX 40/50 and H100. Full precision only pays off for fine-tuning.

What to get for this model

Massed ComputeOpen Massed Compute

Your own GPU: FP8 / INT8 — from RTX 2060 · BF16 — from RTX 2060

Massed Compute hourly prices, November 2026. The discounted price applies with the coupon at checkout.

Estimate: weights plus working memory. Long videos, high resolutions and long contexts need more.

Run it on Massed Compute

The script downloads the model to the rented machine. How to run it is in the model card.

  1. 1. Rent a machine with a fitting GPU

    Open Massed Compute
  2. 2. Paste the script into the machine's terminal

    Connect over SSH (the Massed Compute panel shows the command) or open a terminal on the machine's desktop.

    HF_TOKEN / CIVITAI_TOKENThe script starts with token lines: paste yours between the quotes. The Hugging Face token is for gated models, the Civitai one for Civitai models.

    # dm157/interlock-edge-comparator
    mkdir -p ~/models
    curl -LsSf https://astral.sh/uv/install.sh | sh
    source "$HOME/.local/bin/env"
    uv tool install "huggingface_hub[cli]"
    hf download dm157/interlock-edge-comparator --local-dir ~/models/interlock-edge-comparator
    # The model is in ~/models. How to run it is in the model card (link above).
  3. 3. Use it

    The model is in ~/models. How to run it is in the model card (link above).

Stop the machine in the panel when you are done: it bills by the minute while it runs.

How to speed it up

Picked for this model type. Choose your hardware above to see what fits you exactly.

  • FlashAttention 44.0.0b40from November 18, 2026new release

    fastest exact attention on B200

    Kernels for Blackwell (beta). Exact attention without quantisation — fine for everything, LLMs included.

    How to enable: pip install flash-attn-4; vLLM and SGLang pick it up themselves.

    Earlier generations (2)
    • FlashAttention 3 — The Hopper (H100/H200) version with FP8.
    • FlashAttention 2 — The standard for RTX 30/40/50 and A100: exact attention without the memory cost of long contexts.
  • torch.compile2.15.0from October 28, 2026new release

    10–30% for free

    Compiles the model for your GPU. Slower first run, faster afterwards.

    How to enable: model = torch.compile(model); in ComfyUI the TorchCompileModel node.

Model family

New posts about versions of interlock-edge-comparator (quants, finetunes, LoRAs) will show up under the bell.

No known relatives of this model yet. All derivatives on Hugging Face

About the model

dm157/interlock-edge-comparator
Author
dm157
Category
Other
Released
Posted

On NeyroLearn

Hugging Face

111

Ask AI about this model

Answered by Gemini 4 · the chat is kept only in this tab

Comments