Skip to content
Robotics

microduck-songkran-duck-tug4

tug-of-war control policy for the microduck robot

1 min readupdated

This model is a perpetual control policy for the microduck robotics platform (featuring a 61-D observation space, 14 actions, and a 50 Hz frequency) that runs continuously until stopped. Trained for the Mjlab-TugOfWar-MicroDuck task, the policy loads directly into the robot's slot. An observation normalizer is built right into the ONNX file, allowing the model to accept raw data. The development is intended for researchers and engineers working with robotics hardware and simulations.

Key features

  • Perpetual control policy for the microduck platform (50 Hz)
  • Observation normalizer built into the policy.onnx file
  • Simulation-based training using the Mjlab-TugOfWar-MicroDuck approach
  • Full training reproducibility via fixed code and seed

What you can do

  • Deploy the policy onto a compatible microduck robot using the robotctl utility
  • Reproduce model training with specified parameters using the microduck-challenges repository

Example

sudo robotctl policy load  DenRakEiw/microduck-songkran-duck-tug4
Read moreDetails
Task: Mjlab-TugOfWar-MicroDuck
Repository: microduck-challenges (commit 6c0b5d452)
Checkpoint: 8900, seed: 11
Base model: mjlab-microduck 0.1.0 @ 1efd853be
Discuss Telegram 0 5

Will it run?

Runs in BF16

Fits without quantisation.

  • BF16weights 0.0 GB · ready files0.5 GB
  • FP8 / INT8recommendedweights 0.0 GB0.5 GB
  • 4-bitweights 0.0 GB0.5 GB

Tip: go 8-bit.FP8 / INT8 is within about a percent of full precision in quality, takes half the memory and runs faster on RTX 40/50 and H100. Full precision only pays off for fine-tuning.

What to get for this model

Massed ComputeOpen Massed Compute

Your own GPU: FP8 / INT8 — from RTX 2060 · BF16 — from RTX 2060

Massed Compute hourly prices, November 2026. The discounted price applies with the coupon at checkout.

Estimate: weights plus working memory. Long videos, high resolutions and long contexts need more.

Run it on Massed Compute

The script downloads the model to the rented machine. How to run it is in the model card.

  1. 1. Rent a machine with a fitting GPU

    Open Massed Compute
  2. 2. Paste the script into the machine's terminal

    Connect over SSH (the Massed Compute panel shows the command) or open a terminal on the machine's desktop.

    HF_TOKEN / CIVITAI_TOKENThe script starts with token lines: paste yours between the quotes. The Hugging Face token is for gated models, the Civitai one for Civitai models.

    # DenRakEiw/microduck-songkran-duck-tug4
    mkdir -p ~/models
    curl -LsSf https://astral.sh/uv/install.sh | sh
    source "$HOME/.local/bin/env"
    uv tool install "huggingface_hub[cli]"
    hf download DenRakEiw/microduck-songkran-duck-tug4 --local-dir ~/models/microduck-songkran-duck-tug4
    # The model is in ~/models. How to run it is in the model card (link above).
  3. 3. Use it

    The model is in ~/models. How to run it is in the model card (link above).

Stop the machine in the panel when you are done: it bills by the minute while it runs.

How to speed it up

Picked for this model type. Choose your hardware above to see what fits you exactly.

  • FlashAttention 44.0.0b40from November 18, 2026new release

    fastest exact attention on B200

    Kernels for Blackwell (beta). Exact attention without quantisation — fine for everything, LLMs included.

    How to enable: pip install flash-attn-4; vLLM and SGLang pick it up themselves.

    Earlier generations (2)
    • FlashAttention 3 — The Hopper (H100/H200) version with FP8.
    • FlashAttention 2 — The standard for RTX 30/40/50 and A100: exact attention without the memory cost of long contexts.
  • torch.compile2.15.0from October 28, 2026new release

    10–30% for free

    Compiles the model for your GPU. Slower first run, faster afterwards.

    How to enable: model = torch.compile(model); in ComfyUI the TorchCompileModel node.

Model family

New posts about versions of microduck-songkran-duck-tug4 (quants, finetunes, LoRAs) will show up under the bell.

No known relatives of this model yet. All derivatives on Hugging Face

About the model

DenRakEiw/microduck-songkran-duck-tug4
Author
DenRakEiw
Category
Robotics
Released
Posted

On NeyroLearn

Hugging Face

50

Ask AI about this model

Answered by Gemini 4 · the chat is kept only in this tab

Comments