Skip to content
Robotics

SmolVLA-peg-insertion

точная вставка штифта в симуляции

1 min readupdated

Это файнтюн SmolVLA на базе lerobot/smolvla_base для манипулятора SO-101 в MuJoCo. Модель учится вставлять штифт диаметром 20 мм в отверстие с радиальным зазором 0,25–2 мм. Сделана в рамках учебного robotics-задания.

Ключевые особенности

  • VLM заморожен, обучаются action expert и проекция состояния.
  • Обучение на 1 339 успешных эпизодах скриптового демонстратора с domain randomization по физике и визуалу.
  • На входе 5 углов суставов и gripper 0–100, камеры overhead и wrist 640×480; на выходе 6 абсолютных целей суставов на 30 Гц.
  • Рекомендуется перепланировать каждые 10 действий: на зазорах 0,25–1,5 мм это дало 81 успех из 100 против 57% при полных 50-шаговых чанках.

Пример

Сценарий: подать состояние суставов и изображения с двух камер, задача — Insert the peg into the hole. Модель выдаёт 6 целевых углов суставов; для точной вставки действия перепланируют каждые 10 шагов.

ПодробнееУспех на тесных зазорах: 81/100 при перепланировании каждые 10 действий.
Обучение: batch 16, 30 000 шагов, lr 1e-4, chunk size 50, лимит 8 GB GPU.
Ограничение: только симуляция, на реальном роботе модель не тестировалась.
Discuss Telegram 0 22

Will it run?

Runs in BF16

Fits without quantisation.

  • BF16weights 0.8 GB · ready files1.4 GB
  • FP8 / INT8recommendedweights 0.4 GB1.0 GB
  • 4-bitweights 0.2 GB0.8 GB

Tip: go 8-bit.FP8 / INT8 is within about a percent of full precision in quality, takes half the memory and runs faster on RTX 40/50 and H100. Full precision only pays off for fine-tuning.

What to get for this model

Massed ComputeOpen Massed Compute

Your own GPU: FP8 / INT8 — from RTX 2060 · BF16 — from RTX 2060

Massed Compute hourly prices, November 2026. The discounted price applies with the coupon at checkout.

Estimate: weights plus working memory. Long videos, high resolutions and long contexts need more.

Run it on Massed Compute

The script downloads the model to the rented machine. How to run it is in the model card.

  1. 1. Rent a machine with a fitting GPU

    Open Massed Compute
  2. 2. Paste the script into the machine's terminal

    Connect over SSH (the Massed Compute panel shows the command) or open a terminal on the machine's desktop.

    HF_TOKEN / CIVITAI_TOKENThe script starts with token lines: paste yours between the quotes. The Hugging Face token is for gated models, the Civitai one for Civitai models.

    # davidj24/smolvla-peg-insertion
    mkdir -p ~/models
    curl -LsSf https://astral.sh/uv/install.sh | sh
    source "$HOME/.local/bin/env"
    uv tool install "huggingface_hub[cli]"
    hf download davidj24/smolvla-peg-insertion --local-dir ~/models/smolvla-peg-insertion
    # The model is in ~/models. How to run it is in the model card (link above).
    Add more LoRAs to smolvla-peg-insertion
  3. 3. Use it

    The model is in ~/models. How to run it is in the model card (link above).

Stop the machine in the panel when you are done: it bills by the minute while it runs.

How to speed it up

Picked for this model type. Choose your hardware above to see what fits you exactly.

  • FlashAttention 44.0.0b40from November 18, 2026new release

    fastest exact attention on B200

    Kernels for Blackwell (beta). Exact attention without quantisation — fine for everything, LLMs included.

    How to enable: pip install flash-attn-4; vLLM and SGLang pick it up themselves.

    Earlier generations (2)
    • FlashAttention 3 — The Hopper (H100/H200) version with FP8.
    • FlashAttention 2 — The standard for RTX 30/40/50 and A100: exact attention without the memory cost of long contexts.
  • torch.compile2.15.0from October 28, 2026new release

    10–30% for free

    Compiles the model for your GPU. Slower first run, faster afterwards.

    How to enable: model = torch.compile(model); in ComfyUI the TorchCompileModel node.

Model family

  1. SmolLM2-360Mfamily root
  2. SmolLM2-360M-Instruct
  3. SmolVLM-500M-Instruct
  4. SmolVLM2-500M-Video-Instruct
  5. smolvla_base
  6. smolvla-peg-insertion

New posts about versions of SmolLM2-360M (quants, finetunes, LoRAs) will show up under the bell.

Quantised versions 12All on Hugging Face
Fine-tunes 12All on Hugging Face
LoRAs and adapters 8All on Hugging Face
Merges 1All on Hugging Face

About the model

davidj24/smolvla-peg-insertion
Author
davidj24
Category
Robotics
Released
Posted

On NeyroLearn

Hugging Face

220

Ask AI about this model

Answered by Gemini 4 · the chat is kept only in this tab

Comments