Skip to content
Robotics

g1-move-plate-act

ACT-политика для переноса тарелки гуманоидом Unitree G1

2 min readupdated

Это компактный чекпоинт LeRobot ACT (около 50 млн параметров), который учит гуманоида Unitree G1 с захватами Dex1-1 переставлять тарелку со стойки 1 на стойку 2 в симуляторе MuJoCo на задаче BiGym2 move_plate. Нижняя часть тела при этом заморожена через GR00T-WBC. На вход политика получает три RGB-камеры 84×84 (голова и два запястья) и 28 проприоцептивных позиций, на выход выдаёт 20-мерное нормализованное действие. Обучение шло на 360 эпизодах: 60 человеческих демонстраций и 300 синтетических от скриптового эксперта, всего 249 251 кадр. Пригодится для воспроизведения, сравнения и дообучения робототехнических политик, а не для чатов.

Ключевые особенности

  • ACT-политика для Unitree G1 + Dex1-1 в BiGym2, нижняя часть тела заморожена GR00T-WBC.
  • Вход: три RGB-камеры 84×84 и 28 проприоцептивных измерений, без привилегированного состояния.
  • Выход: 20-мерное действие, chunk 50 с temporal ensembling 0.01, одно действие на шаг контроля.
  • 30/30 на официальном публичном блоке 7 310 000 и 119/120 на held-out блоке 8 100 000.

Что можно сделать

  • Запустить оценку в BiGym2/MuJoCo и воспроизвести успешные эпизоды из карточки.
  • Сравнить политику с другими ACT-чекпоинтами для задачи move_plate.
  • Использовать как baseline для пайплайна с человеческими и синтетическими демонстрациями.

Пример

hf download Ctrlgb/g1-move-plate-act --exclude "videos/*" --local-dir checkpoints/act_move_plate_v5
ПодробнееОценка по Advaitic balanced-slot protocol: официальный блок 7 310 000 — 30/30 PASS, по 5/5 в каждом слоте.
Held-out блок 8 100 000 — 119/120; единственный провал: тарелка осталась на краю стойки и не встала на место.
Обучение: batch 256, lr 2e-5, 50k шагов, fp32, бэкбоны ResNet18 с инициализацией ImageNet.
Ограничение: одна задача move_plate в симуляторе, без привилегированного состояния.
Discuss Telegram 0 26

Will it run?

Runs in F32

Fits without quantisation.

  • F32weights 0.2 GB · ready files0.7 GB
  • BF16weights 0.1 GB0.6 GB
  • FP8 / INT8recommendedweights 0.0 GB0.6 GB
  • 4-bitweights 0.0 GB0.5 GB

Tip: go 8-bit.FP8 / INT8 is within about a percent of full precision in quality, takes half the memory and runs faster on RTX 40/50 and H100. Full precision only pays off for fine-tuning.

What to get for this model

Massed ComputeOpen Massed Compute

Your own GPU: FP8 / INT8 — from RTX 2060 · F32 — from RTX 2060

Massed Compute hourly prices, November 2026. The discounted price applies with the coupon at checkout.

Estimate: weights plus working memory. Long videos, high resolutions and long contexts need more.

Run it on Massed Compute

The script downloads the model to the rented machine. How to run it is in the model card.

  1. 1. Rent a machine with a fitting GPU

    Open Massed Compute
  2. 2. Paste the script into the machine's terminal

    Connect over SSH (the Massed Compute panel shows the command) or open a terminal on the machine's desktop.

    HF_TOKEN / CIVITAI_TOKENThe script starts with token lines: paste yours between the quotes. The Hugging Face token is for gated models, the Civitai one for Civitai models.

    # Ctrlgb/g1-move-plate-act
    # ===== Tokens: paste yours between the quotes =====
    export HF_TOKEN=""        # huggingface.co/settings/tokens, for gated models
    # ==========================================
    mkdir -p ~/models
    curl -LsSf https://astral.sh/uv/install.sh | sh
    source "$HOME/.local/bin/env"
    uv tool install "huggingface_hub[cli]"
    hf download Ctrlgb/g1-move-plate-act --local-dir ~/models/g1-move-plate-act
    # The model is in ~/models. How to run it is in the model card (link above).
    Add more LoRAs to g1-move-plate-act
  3. 3. Use it

    The model is in ~/models. How to run it is in the model card (link above).

Stop the machine in the panel when you are done: it bills by the minute while it runs.

How to speed it up

Picked for this model type. Choose your hardware above to see what fits you exactly.

  • FlashAttention 44.0.0b40from November 18, 2026new release

    fastest exact attention on B200

    Kernels for Blackwell (beta). Exact attention without quantisation — fine for everything, LLMs included.

    How to enable: pip install flash-attn-4; vLLM and SGLang pick it up themselves.

    Earlier generations (2)
    • FlashAttention 3 — The Hopper (H100/H200) version with FP8.
    • FlashAttention 2 — The standard for RTX 30/40/50 and A100: exact attention without the memory cost of long contexts.
  • torch.compile2.15.0from October 28, 2026new release

    10–30% for free

    Compiles the model for your GPU. Slower first run, faster afterwards.

    How to enable: model = torch.compile(model); in ComfyUI the TorchCompileModel node.

Model family

New posts about versions of g1-move-plate-act (quants, finetunes, LoRAs) will show up under the bell.

No known relatives of this model yet. All derivatives on Hugging Face

About the model

Ctrlgb/g1-move-plate-act
Author
Ctrlgb
Category
Robotics
Released
Posted

On NeyroLearn

Hugging Face

260

Ask AI about this model

Answered by Gemini 4 · the chat is kept only in this tab

Comments