Skip to content
Images

Manga style (Berserk)

мрачная манга в вашей генерации

2 min read

Это LoRA для генерации изображений в стиле манги «Берсерк» Кэнтаро Миуры. Она добавляет картинке характерную мрачную манеру, а по триггеру manga style позволяет управлять стилем. Базовая модель — Krea 2; в карточке также показаны примеры и настройки для Ideogram 4, Klein 9B, ZIB v1, Qwen и Flux. Кроме стиля, LoRA умеет рисовать персонажей Guts, Casca и Griffith. Пригодится тем, кто делает фан-арт, иллюстрации или кадры в духе тёмного фэнтези.

Ключевые особенности

  • Стиль манги «Берсерк»: мрачная графика и характерная штриховка.
  • Триггер manga style — с него удобно начинать промпт.
  • Поддерживает персонажей Guts, Casca и Griffith.
  • Базовая модель — Krea 2; в карточке есть примеры для Ideogram 4, Klein 9B, ZIB v1, Qwen и Flux.
  • Сила LoRA подбирается под базу: от 0.7–1.0 до 1.2.

Что можно сделать

  • Сгенерировать портрет или сцену в стиле манги «Берсерк» с промптом на основе manga style.
  • Сделать фан-арт с Guts, Casca или Griffith в этой же манере.
  • Для Flux автор советует начинать промпт с black and white Berserk manga style image of и ставить силу LoRA около 0.8.
  • На Krea 2 Turbo автор показывает 8 шагов, CFG 1, Euler simple, 768×1152 и Hires x2.

Пример

Промпт: manga style, black and white Berserk manga style image of Guts
Для Flux сила LoRA — около 0.8; для Krea 2 в карточке указана 1.2.

ПодробнееБенчмарков нет. Базовая модель — Krea 2; автор также тестировал Ideogram 4, Klein 9B, ZIB v1, Qwen и Flux.
Для Krea 2 Turbo: 8 steps / CFG 1 / Euler simple / 768×1152 / Hires x2 (10 steps, 0.35 с 4x_NMKD_Siax), сила LoRA 1.2.
Для Flux автор советует силу 0.8 и промпт, начинающийся с black and white Berserk manga style image of.
Ограничение Qwen: иногда без запроса появляются шрамы на коже и японская звукопись.
Примеры
Discuss 391 4.3K

Will it run?

Runs in BF16

Fits without quantisation.

  • BF16weights 9.6 GB · ready files12 GB
  • FP8 / INT8recommendedweights 4.9 GB6.9 GB
  • 4-bitweights 2.8 GB4.6 GB

Tip: go 8-bit.FP8 / INT8 is within about a percent of full precision in quality, takes half the memory and runs faster on RTX 40/50 and H100. Full precision only pays off for fine-tuning.

What to get for this model

Massed ComputeOpen Massed Compute

Your own GPU: FP8 / INT8 — from RTX 5060 Ti 8GB · BF16 — from RTX 5080

Massed Compute hourly prices, November 2026. The discounted price applies with the coupon at checkout.

This is a LoRA: counted together with its base model MOSS-Image-SFT.

Estimate: weights plus working memory. Long videos, high resolutions and long contexts need more.

Run it on Massed Compute

The script downloads the model to the rented machine. How to run it is in the model card.

  1. 1. Rent a machine with a fitting GPU

    Open Massed Compute
  2. 2. Paste the script into the machine's terminal

    Connect over SSH (the Massed Compute panel shows the command) or open a terminal on the machine's desktop.

    HF_TOKEN / CIVITAI_TOKENThe script starts with token lines: paste yours between the quotes. The Hugging Face token is for gated models, the Civitai one for Civitai models.

    # civitai/743448-manga-style-berserk
    # ===== Tokens: paste yours between the quotes =====
    export HF_TOKEN=""        # huggingface.co/settings/tokens, for gated models
    export CIVITAI_TOKEN=""   # civitai.com/user/account → API Keys, for Civitai LoRAs
    # ==========================================
    mkdir -p ~/models
    curl -LsSf https://astral.sh/uv/install.sh | sh
    source "$HOME/.local/bin/env"
    uv tool install "huggingface_hub[cli]"
    hf download OpenMOSS-Team/MOSS-Image-SFT --local-dir ~/models/MOSS-Image-SFT
    vid=$(curl -fsSL "https://civitai.com/api/v1/models/743448" | python3 -c 'import json,sys;print(json.load(sys.stdin)["modelVersions"][0]["id"])')
    cd ~/models && curl -fL -OJ -H "Authorization: Bearer $CIVITAI_TOKEN" "https://civitai.com/api/download/models/$vid"
    # The model is in ~/models. How to run it is in the model card (link above).
    Add more LoRAs to MOSS-Image-SFT
  3. 3. Use it

    The model is in ~/models. How to run it is in the model card (link above).

Stop the machine in the panel when you are done: it bills by the minute while it runs.

How to speed it up

Picked for this model type. Choose your hardware above to see what fits you exactly.

  • SageAttention 3v2.2.0from October 28, 2025

    even faster on RTX 50 / Blackwell

    FP4 attention for Blackwell. Faster than SageAttention 2, but the authors suggest v2 when accuracy matters.

    How to enable: Build from the sageattention3_blackwell folder of the repo; in ComfyUI via KJNodes.

    Earlier generations (2)
    • SageAttention 2++ — Quantised (INT8/FP8) attention with no visible quality loss. The main speed-up for image and video generation.
    • SageAttention 1 — First version: INT8 for Q·K. Still works, but 2++ is faster and more accurate.
  • FlashAttention 44.0.0b40from November 18, 2026new release

    fastest exact attention on B200

    Kernels for Blackwell (beta). Exact attention without quantisation — fine for everything, LLMs included.

    How to enable: pip install flash-attn-4; vLLM and SGLang pick it up themselves.

    Earlier generations (3)
    • FlashAttention 3 — The Hopper (H100/H200) version with FP8.
    • FlashAttention 2 — The standard for RTX 30/40/50 and A100: exact attention without the memory cost of long contexts.
    • xFormers — The older way to speed up attention, works almost everywhere. Sage or Flash are faster where available.
  • cache-dit (DBCache)v1.5.6from November 20, 2026new release

    1.5–3× at nearly the same quality

    Reuses block outputs between diffusion steps. Supports most DiT models.

    How to enable: pip install cache-dit; one line cache_dit.enable_cache(pipe) for diffusers.

    Earlier generations (2)
    • MagCache — Skips steps by magnitude of change. More accurate than TeaCache, no calibration.
    • TeaCache — The first popular diffusion step cache. Works, newer methods are more accurate.
  • Nunchaku (SVDQuant 4-bit)v1.2.1from January 25, 2026

    ≈3× faster and 3.5× less memory

    4-bit versions of popular image models with almost no quality loss (FP4 on RTX 50).

    How to enable: Ready weights for supported models; in ComfyUI use ComfyUI-nunchaku.

  • torch.compile2.15.0from October 28, 2026new release

    10–30% for free

    Compiles the model for your GPU. Slower first run, faster afterwards.

    How to enable: model = torch.compile(model); in ComfyUI the TorchCompileModel node.

Model family

Requires the base model

OpenMOSS-Team/MOSS-Image-SFT

This model is a LoRA / adapter. Download the base model first, then load this one on top.

  1. MOSS-Image-Basefamily root
  2. MOSS-Image-SFT
  3. 743448-manga-style-berserk

New posts about versions of MOSS-Image-Base (quants, finetunes, LoRAs) will show up under the bell.

Quantised versions 12All on Hugging Face
Fine-tunes 12All on Hugging Face
LoRAs and adapters 12All on Hugging Face
Merges 2All on Hugging Face

About the model

civitai/743448-manga-style-berserk
Author
Yofaraway
Category
Images
Released
Posted

On NeyroLearn

Civitai

4.3K391

Ask AI about this model

Answered by Gemini 4 · the chat is kept only in this tab

Comments