Skip to content
Other

nanoGlimmer

языковая модель на 29M параметров для микроконтроллера ESP32-S3

2 min readupdated

Сверхкомпактная LLM на 28,98 млн параметров от разработчика apullin, которая сочиняет короткие детские сказки на английском языке прямо на микроконтроллере ESP32-S3. Архитектура Glimmer использует подход Per-Layer Embeddings (отдельные таблицы эмбеддингов для каждого слоя, идея из Google Gemma 3n) и скользящее окно внимания. В отличие от обычных мини-моделей, nanoGlimmer изначально обучалась с учётом квантования (QAT — quantization-aware training) в формат int4, поэтому на чипе она работает без потери точности относительно ПК. Проект пригодится embedded-разработчикам и энтузиастам Edge AI, которые хотят запускать генерацию текста на дешёвом железе с 16 МБ flash-памяти и 8 МБ PSRAM без облака.

Ключевые особенности

  • Архитектура Glimmer + PLE: 8 слоёв, d_model 256, 8 query-голов на 1 KV-голову, окно внимания 64 токена в трёх из четырёх слоёв и контекст 256 токенов.
  • Нативный int4 через QAT: веса и таблицы эмбеддингов обучались в 4-битном режиме группами по 128 значений, благодаря чему логиты на микроконтроллере побитово совпадают с расчётами на ПК.
  • Реальная скорость на ESP32-S3: весит 15 МБ во flash-памяти (6 МБ загружается в PSRAM) и генерирует текст со скоростью 13,8 токена в секунду (72,3 мс на токен) на двух ядрах чипа.
  • Открытый пайплайн воспроизведения: в репозитории есть скрипт обучения и байтовый BPE-токенизатор на 8 192 токена; модель обучалась на датасете TinyStories (около 1 млрд токенов) за 1 час 45 минут на одной H100.

Что можно сделать

  • Прошить плату ESP32-S3 через фреймворк ExecuTorch и получить автономный генератор простых английских историй без интернета.
  • Взять готовый скрипт train.py и архитектуру Glimmer для обучения собственной ультралёгкой LLM под узкую задачу или команды на микроконтроллерах.
  • Использовать чекпоинт как эталон для тестирования int4-экспорта и сравнения побитовой точности инференса между ПК и embedded-устройствами.

Пример

hf download apullin/nanoglimmer nanoglimmer-story.pt tokenizer.json --local-dir nanoglimmer
python story/write_story.py --checkpoint nanoglimmer/nanoglimmer-story.pt \
    --tokenizer nanoglimmer/tokenizer.json
Подробнее Метрики: validation loss 1.6115 (perplexity 5.01) на отложенной выборке TinyStories.
Параметры: 28 977 664 (из них 18,87 млн в таблицах эмбеддингов и 8 млн в слоях).
Требования к железу: микроконтроллер ESP32-S3 с 16 MB flash и 8 MB PSRAM, сборка через ExecuTorch и ESP-IDF 5.5.5.
Ограничения: генерирует только короткие сказки на простом английском языке, длина контекста — 256 токенов.
Лицензия: BSD 3-Clause на веса и токенизатор, MIT на код обучения.
Discuss Telegram 0

Will it run?

Runs in BF16

Fits without quantisation.

  • BF16weights 0.1 GB · ready files0.6 GB
  • FP8 / INT8recommendedweights 0.1 GB0.6 GB
  • 4-bitweights 0.0 GB0.5 GB

Tip: go 8-bit.FP8 / INT8 is within about a percent of full precision in quality, takes half the memory and runs faster on RTX 40/50 and H100. Full precision only pays off for fine-tuning.

What to get for this model

Massed ComputeOpen Massed Compute

Your own GPU: FP8 / INT8 — from RTX 2060 · BF16 — from RTX 2060

Massed Compute hourly prices, November 2026. The discounted price applies with the coupon at checkout.

Estimate: weights plus working memory. Long videos, high resolutions and long contexts need more.

Run it on Massed Compute

The script downloads the model to the rented machine. How to run it is in the model card.

  1. 1. Rent a machine with a fitting GPU

    Open Massed Compute
  2. 2. Paste the script into the machine's terminal

    Connect over SSH (the Massed Compute panel shows the command) or open a terminal on the machine's desktop.

    HF_TOKEN / CIVITAI_TOKENThe script starts with token lines: paste yours between the quotes. The Hugging Face token is for gated models, the Civitai one for Civitai models.

    # apullin/nanoglimmer
    mkdir -p ~/models
    curl -LsSf https://astral.sh/uv/install.sh | sh
    source "$HOME/.local/bin/env"
    uv tool install "huggingface_hub[cli]"
    hf download apullin/nanoglimmer --local-dir ~/models/nanoglimmer
    # The model is in ~/models. How to run it is in the model card (link above).
    Add more LoRAs to nanoglimmer
  3. 3. Use it

    The model is in ~/models. How to run it is in the model card (link above).

Stop the machine in the panel when you are done: it bills by the minute while it runs.

How to speed it up

Picked for this model type. Choose your hardware above to see what fits you exactly.

  • FlashAttention 44.0.0b40from November 18, 2026new release

    fastest exact attention on B200

    Kernels for Blackwell (beta). Exact attention without quantisation — fine for everything, LLMs included.

    How to enable: pip install flash-attn-4; vLLM and SGLang pick it up themselves.

    Earlier generations (2)
    • FlashAttention 3 — The Hopper (H100/H200) version with FP8.
    • FlashAttention 2 — The standard for RTX 30/40/50 and A100: exact attention without the memory cost of long contexts.
  • torch.compile2.15.0from October 28, 2026new release

    10–30% for free

    Compiles the model for your GPU. Slower first run, faster afterwards.

    How to enable: model = torch.compile(model); in ComfyUI the TorchCompileModel node.

Model family

New posts about versions of nanoglimmer (quants, finetunes, LoRAs) will show up under the bell.

No known relatives of this model yet. All derivatives on Hugging Face

About the model

apullin/nanoglimmer
Author
apullin
Category
Other
Released
Posted

On NeyroLearn

Hugging Face

00

Ask AI about this model

Answered by Gemini 4 · the chat is kept only in this tab

Comments