Skip to content
Language models

DeepSeek-V4.1-Flash-1017-Uncensored-GSQ-RCO-Coder-GGUF

кодерская модель без отказов и потери качества

2 min readupdated

Перед вами сборка кодерской языковой модели DeepSeek-V4.1-Flash в формате GGUF от автора Abiray, из которой убрали цензуру (сделали abliteration — удаление механизма отказов). Обычно при такой процедуре веса приходится переквантовывать, из-за чего падает качество генерации, но здесь автор применил «хирургическую» пересадку тензоров из донорской версии AtomicChat/DeepSeek-V4.1-Flash-1017-Uncensored-GGUF поверх квантованной базы от ISTA-DASLab. В результате модель отвечает на любые запросы по системному программированию и безопасности, полностью сохраняя интеллект оригинального кодера.

Ключевые особенности

  • Без деградации весов: заменены только 82 плотных слоя (attn_output_b, ffn_down_shexp, engram_kv) без повторного квантования.
  • Нетронутые эксперты: все 192 маршрутизируемых кодерских эксперта (MoE) на слой и роутеры остались на 100% идентичными оригиналу ISTA-DASLab.
  • Полный автономный комплект: в репозитории есть основные шарды IQ2_XXS (72.1 ГБ), общая таблица поиска Engram (110.6 ГБ) и проектор для работы с изображениями (mmproj).
  • Потоковая загрузка с диска: благодаря mmap таблица Engram подгружается построчно на каждый токен, не требуя загрузки целиком в память.

Что можно сделать

  • Писать низкоуровневый системный код, сетевые утилиты и инструменты для аудита безопасности без ложных срабатываний фильтров.
  • Запускать локально через llama.cpp (от версии b11870) или Strata (от v0.2.5) на машине с 96–128 ГБ оперативной памяти.
  • Управлять глубиной рассуждений модели: оставить стандартный режим размышлений () для сложных задач или отключить его флагом --reasoning-budget 0 для мгновенного вывода кода.

Пример

./llama-cli \
  -m DeepSeek-V4.1-Flash-1017-Uncensored-GSQ-RCO-Coder-IQ2_XXS-00001-of-00006.gguf \
  --jinja -c 16384 -n 2048 -t 16 --temp 0.2 \
  -p "Write a high-performance raw-socket TCP SYN scanner in Python using struct.pack."
ПодробнееМетрики относительно оригинала: совпадение Top-1 токенов — 99.80%, косинусное сходство по 40 слоям — 0.99999993, частота отказов снижена с 86.4% до 0.0%.
Бенчмарки базы сохранены на 100%: 98.7% на LCB и 94.8% на SWE.
Требования: от 96–128 ГБ системной RAM (CPU или гибридный офлоад GPU + RAM) и ~183 ГБ места на диске.
Для llama.cpp перед первым запуском нужно создать симлинк на файл Engram как на 6-й шард.
Discuss 37 39.2K

Will it run?

Won't run

Not enough memory even for 4-bit. Below are GPUs you can rent.

  • GGUF IQ4_NLweights 103 GB · ready files114 GB
  • GGUF IQ2_XXSweights 67 GB · ready files74 GB

What to get for this model

Massed ComputeOpen Massed Compute

Your own GPU: Won't fit any home GPU — renting is cheaper.

Massed Compute hourly prices, November 2026. The discounted price applies with the coupon at checkout.

Estimate: weights plus working memory. Long videos, high resolutions and long contexts need more.

Run it on Massed Compute

A ready script for the machine we advise above: paste it and the model downloads and starts.

  1. 1. Rent 4× RTX A6000

    $1.71 an hour with the coupon. Pick the Ubuntu image when you create the machine.

    Open Massed Compute
  2. 2. Paste the script into the machine's terminal

    Connect over SSH (the Massed Compute panel shows the command) or open a terminal on the machine's desktop.

    HF_TOKEN / CIVITAI_TOKENThe script starts with token lines: paste yours between the quotes. The Hugging Face token is for gated models, the Civitai one for Civitai models.

    # Abiray/DeepSeek-V4.1-Flash-1017-Uncensored-GSQ-RCO-Coder-GGUF — 4× RTX A6000, GGUF IQ4_NL
    # NVIDIA driver: CUDA 13 needs 580+. If older or missing, the current nvidia-open is installed (keep yours: KEEP_DRIVER=1)
    DRV=$(nvidia-smi --query-gpu=driver_version --format=csv,noheader 2>/dev/null | head -1 | cut -d. -f1)
    case "$DRV" in ""|*[!0-9]*) DRV=0 ;; esac
    if [ "$DRV" -lt 580 ] && [ -z "${KEEP_DRIVER:-}" ]; then
      . /etc/os-release && \
      curl -fsSLO "https://developer.download.nvidia.com/compute/cuda/repos/ubuntu${VERSION_ID//./}/x86_64/cuda-keyring_1.1-1_all.deb" && \
      sudo dpkg -i cuda-keyring_1.1-1_all.deb && rm -f cuda-keyring_1.1-1_all.deb && \
      sudo apt-get update && \
      sudo DEBIAN_FRONTEND=noninteractive apt-get install -y nvidia-open || \
      { echo "Could not install the NVIDIA driver: see the error above. To keep the current one, run with KEEP_DRIVER=1."; exit 1; }
      echo "NVIDIA driver updated. Reboot the machine (sudo reboot) and run this same script again."
      exit 0
    fi
    curl -fsSL https://ollama.com/install.sh | sh
    ollama run hf.co/Abiray/DeepSeek-V4.1-Flash-1017-Uncensored-GSQ-RCO-Coder-GGUF:IQ4_NL
  3. 3. Use it

    The chat opens right in the terminal. Leave with /bye, start again with the same ollama run command.

Stop the machine in the panel when you are done: it bills by the minute while it runs.

How to speed it up

Picked for this model type. Choose your hardware above to see what fits you exactly.

  • FlashAttention 44.0.0b40from November 18, 2026new release

    fastest exact attention on B200

    Kernels for Blackwell (beta). Exact attention without quantisation — fine for everything, LLMs included.

    How to enable: pip install flash-attn-4; vLLM and SGLang pick it up themselves.

    Earlier generations (2)
    • FlashAttention 3 — The Hopper (H100/H200) version with FP8.
    • FlashAttention 2 — The standard for RTX 30/40/50 and A100: exact attention without the memory cost of long contexts.
  • torch.compile2.15.0from October 28, 2026new release

    10–30% for free

    Compiles the model for your GPU. Slower first run, faster afterwards.

    How to enable: model = torch.compile(model); in ComfyUI the TorchCompileModel node.

  • MTP (multi-token prediction)0.34.0from November 16, 2026new release

    1.5–2× generation speed

    If the model has MTP layers (DeepSeek-V3/R1, Qwen3-Next, GLM, MiMo and others), it predicts several tokens per step itself.

    How to enable: vLLM / SGLang: --speculative-config '{"method": "mtp", "num_speculative_tokens": 1}'. Check the model card.

    Earlier generations (2)
    • EAGLE-3 — Speculative decoding with a small draft head. For models without their own MTP layers.
    • EAGLE-2 / Medusa — Earlier draft-head generations. Still work if that is all you find.
  • FP8 KV cache0.34.0from November 16, 2026new release

    2× more context in the same memory

    Keeps the attention cache in 8 bits, so long contexts fit where they did not.

    How to enable: vLLM: --kv-cache-dtype fp8; llama.cpp: -ctk q8_0 -ctv q8_0.

  • vLLM / SGLang0.34.0from November 16, 2026new release

    many times more tokens/s on a server

    Server engines: batching, FlashAttention, FP8 and speculative decoding out of the box.

    How to enable: vllm serve <model> — an OpenAI-compatible API.

    Earlier generations (1)
    • llama.cpp — GGUF models on any GPU, Mac or even CPU; some layers can stay in RAM.

Model family

  1. DeepSeek-V4.1-Flash-1017family root
  2. DeepSeek-V4.1-Flash-1017-GSQ-RCO-Coder-GGUF
  3. DeepSeek-V4.1-Flash-1017-Uncensored-GSQ-RCO-Coder-GGUF

New posts about versions of DeepSeek-V4.1-Flash-1017 (quants, finetunes, LoRAs) will show up under the bell.

Quantised versions 12All on Hugging Face
Fine-tunes 9All on Hugging Face
LoRAs and adapters 2All on Hugging Face
Merges 1All on Hugging Face

About the model

Abiray/DeepSeek-V4.1-Flash-1017-Uncensored-GSQ-RCO-Coder-GGUF
Author
Abiray
Category
Language models
Released
Posted

On NeyroLearn

Hugging Face

39.2K37

Ask AI about this model

Answered by Gemini 4 · the chat is kept only in this tab

Comments