Skip to content
Other

defect-detector-neu-det

детектор дефектов стали на базе YOLOv8s

2 min readupdated

Модель defect-detector-neu-det от автора Aarun-1 находит и классифицирует шесть типов дефектов поверхности горячекатаной стали на черно-белых снимках: трещины (crazing), включения (inclusion), пятна (patches), точечную коррозию (pitted_surface), вкатанную окалину (rolled-in_scale) и царапины (scratches). В основе лежит компактная архитектура Ultralytics YOLOv8s (11 млн параметров), дообученная на исследовательском датасете NEU-DET с разрешением входа 640×640. От простых демо-моделей проект отличается полноценным инженерным пайплайном вокруг весов: здесь есть слой принятия решений на основе стоимости ошибок, мониторинг дрейфа данных и автоматический отбор моделей перед обновлением. Модель не предназначена для реального производства, но отлично подойдет ML-инженерам и студентам как готовый шаблон MLOps-системы компьютерного зрения.

Ключевые особенности

  • Высокая точность на выраженных дефектах: AP50 достигает 0.952 на царапинах (scratches) и 0.877 на пятнах (patches).
  • Встроенная политика принятия решений: детекции маршрутизируются на ручную проверку (human_review) или в алерт с учетом условной стоимости пропуска и ложного срабатывания.
  • Двухуровневый мониторинг дрейфа: система отслеживает сдвиги яркости, контраста, шума и уверенности модели с помощью двухвыборочного теста Колмогорова — Смирнова (KS test).
  • Готовая инфраструктура: в репозитории предусмотрены сервис на FastAPI, интерфейс Gradio и строгий promotion gate для проверки новых версий весов.

Что можно сделать

  • Использовать как эталонный учебный пример для построения end-to-end пайплайна дефектоскопии с логикой эскалации на оператора.
  • Взять за основу FastAPI-обвязку и скрипты проверки дрейфа (KS test с поправкой Холма) для собственных задач промышленного контроля качества.
  • Протестировать гипотезы по улучшению локализации размытых текстурных дефектов вроде сетки трещин (crazing), где модель чаще ошибается с границами рамки, чем с самим фактом наличия дефекта.

Пример

Модель принимает одиночное черно-белое изображение поверхности стали (исходно 200×200 в NEU-DET, приводится к 640×640), возвращает координаты боксов для 6 классов дефектов и пропускает их через пороговую политику: например, уверенность от 0.10 до 0.25 для crazing отправляет снимок на ручную проверку оператору, а значения выше верхнего порога формируют сигнал тревоги (monitor, schedule_service или stop_now).

ПодробнееМетрики на валидации (216 изображений): mAP50 = 0.755 (при conf 0.001) и 0.668 (при conf 0.25), mAP50-95 = 0.430, Precision = 0.725, Recall = 0.713.
Обучение: YOLOv8s (11M параметров), 50 эпох, batch 16, lr0 0.001 на одном GPU Kaggle.
Устойчивость: модель стабильна к изменениям яркости, но заметно теряет качество при размытии (до -0.53 mAP50), шуме (до -0.73) и сильном JPEG-сжатии.
Ограничения: обучена только на 1800 лабораторных снимках без примеров здоровой стали без дефектов; лицензия весов AGPL-3.0, лицензия датасета NEU-DET не определена.
Discuss Telegram 0 64

Will it run?

Runs in BF16

Fits without quantisation.

  • BF16weights 0.0 GB · ready files0.5 GB
  • FP8 / INT8recommendedweights 0.0 GB0.5 GB
  • 4-bitweights 0.0 GB0.5 GB

Tip: go 8-bit.FP8 / INT8 is within about a percent of full precision in quality, takes half the memory and runs faster on RTX 40/50 and H100. Full precision only pays off for fine-tuning.

What to get for this model

Massed ComputeOpen Massed Compute

Your own GPU: FP8 / INT8 — from RTX 2060 · BF16 — from RTX 2060

Massed Compute hourly prices, November 2026. The discounted price applies with the coupon at checkout.

Estimate: weights plus working memory. Long videos, high resolutions and long contexts need more.

Run it on Massed Compute

The script downloads the model to the rented machine. How to run it is in the model card.

  1. 1. Rent a machine with a fitting GPU

    Open Massed Compute
  2. 2. Paste the script into the machine's terminal

    Connect over SSH (the Massed Compute panel shows the command) or open a terminal on the machine's desktop.

    HF_TOKEN / CIVITAI_TOKENThe script starts with token lines: paste yours between the quotes. The Hugging Face token is for gated models, the Civitai one for Civitai models.

    # Aarun-1/defect-detector-neu-det
    mkdir -p ~/models
    curl -LsSf https://astral.sh/uv/install.sh | sh
    source "$HOME/.local/bin/env"
    uv tool install "huggingface_hub[cli]"
    hf download Aarun-1/defect-detector-neu-det --local-dir ~/models/defect-detector-neu-det
    # The model is in ~/models. How to run it is in the model card (link above).
  3. 3. Use it

    The model is in ~/models. How to run it is in the model card (link above).

Stop the machine in the panel when you are done: it bills by the minute while it runs.

How to speed it up

Picked for this model type. Choose your hardware above to see what fits you exactly.

  • FlashAttention 44.0.0b40from November 18, 2026new release

    fastest exact attention on B200

    Kernels for Blackwell (beta). Exact attention without quantisation — fine for everything, LLMs included.

    How to enable: pip install flash-attn-4; vLLM and SGLang pick it up themselves.

    Earlier generations (2)
    • FlashAttention 3 — The Hopper (H100/H200) version with FP8.
    • FlashAttention 2 — The standard for RTX 30/40/50 and A100: exact attention without the memory cost of long contexts.
  • torch.compile2.15.0from October 28, 2026new release

    10–30% for free

    Compiles the model for your GPU. Slower first run, faster afterwards.

    How to enable: model = torch.compile(model); in ComfyUI the TorchCompileModel node.

Model family

New posts about versions of defect-detector-neu-det (quants, finetunes, LoRAs) will show up under the bell.

No known relatives of this model yet. All derivatives on Hugging Face

About the model

Aarun-1/defect-detector-neu-det
Author
Aarun-1
Category
Other
Released
Posted

On NeyroLearn

Hugging Face

640

Ask AI about this model

Answered by Gemini 4 · the chat is kept only in this tab

Comments